Continuous Plate House 2.0 Prenova Stanovanja – avtor Ryumei Fujik and Yukiko Sato

Delo Continuous Plate House 2.0 Prenova Stanovanja avtorja Ryumei Fujik and Yukiko Sato je izjemno cenjeni dobitnik prestižne nagrade 2020 Bronasta nagrada A' Design Award v tekmovalni kategoriji Oblikovanje notranjega prostora in razstav.

BronastaInterier· 2020

Continuous Plate House 2.0 Prenova Stanovanja

avtor/ica: Ryumei Fujik and Yukiko Sato

Naročnik: F.a.d.s

Dobitnik nagrade Bronasta nagrada A' Design Award v kategoriji Interier

18,545

Potrjeni dobitnik nagrade

Preverite status nagrade za #92851

Obiščite spletno stran Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu Continuous Plate House 2.0 Prenova Stanovanja

Ta hiša je bila prenovljena predvsem v prvem nadstropju, ker je bila dokončana 18 let. Obnova je zahtevala, da se obstoječi kuhinjski del, ki ga sestavljajo kuhinja, zajtrkovalnica in shramba za živila, spremeni v prostor, ki se lahko uporablja za različne namene. Da bi se odzvali na to povpraševanje, so bili odpravljeni prostor za shranjevanje hrane in hodniki, tako da je celoten prostor postal širok en prostor, pomivalno korito pa je bilo spremenjeno iz stenskega v otoško, tako da je bilo več prostora osredotočeno na kuhinjsko enoto. . Ponovno se je rodila kot mirna in prijetna soba, ker je prekrita z lesenim zaključkom.

Priznanje

O nagradi Bronasta nagrada A' Design Award

Continuous Plate House 2.0 Prenova Stanovanja je prejemnik Bronaste nagrade A' Design Award, zelo prestižnega priznanja, ki se podeljuje izjemnim oblikovanjem, ki se odlikujejo po ustvarjalnosti, iznajdljivosti in bistrosti. Prejemniki Bronaste nagrade so v celoti spretni in presenetljivo ustvarjalni artefakti, ki potrjujejo bogate izkušnje, domišljijo in zvitost svojih oblikovalcev. Od Continuous Plate House 2.0 Prenova Stanovanja se pričakuje, da bo visoko cenjen, občudovan in ljubljen predmet, opazno profesionalen in inovativen. To oblikovanje, nagrajeno z Bronasto nagrado A' Design Award, vključuje najboljše prakse v umetnosti, znanosti, oblikovanju in tehnologiji ter je odlično po pozornosti do podrobnosti. Continuous Plate House 2.0 Prenova Stanovanja sijajno zadovoljuje potrebe, se dotika želja, očara čustva in vzbuja radovednost.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: The renovation required that the existing kitchen area, consisting of the kitchen, breakfast corner, and food storage, be changed to a space that can be used for various purposes, not just at breakfast. In order to respond to this demand, the food storage and corridors were eliminated, making the entire space one room wide, and the sink was changed from a wall-mounted type to an island type, making it a more space centered on the kitchen unit. It has been reborn as a calm and cozy family room.
Dimenzije in embalaža: The size of the Kitchen area is width:3.2m by hight:2.4m by depth:7m.
Oznake: Residence Renovation, Kitchen, spruce CLT panel, Continuous Plate
Proizvodna tehnologija: The Kitchen area is covered with spruce CLT panels (made in Austria).
Oblikovalski izziv: How Break a Box-form Architecture: In the original project (Continuous Plate House 1.0), it began to think from a box form at first. Although the effective idea was not able to be found out easily, as a result of repeating whether there is any method of breaking that somehow, and trial and error, composition as if the floor, the wall, and the roof were connected continuously and bent and built one plate was obtained.
Raziskave: Response to a Heavy Snowfall: The principal focus of the original project (Continuous Plate House 1.0) was how we should design in response to a heavy snowfall. Since there are some examples of research that snow cannot lie easily due to the influence of a wind as for a flat roof if there is even no parapet, rather, we designed by adopting such a flat roof since 1999.
Inspiracija: This house has been renovated mainly on the first floor because 18 years the completion. It is made by folding a plate, and a rectangular box made of concrete is inserted into it to support the whole. The outer surface of the box is finished with concrete cast in cedar board formwork, leaving the texture of wood even though it is concrete. In order to further strengthen the design concept at the completion, the entire inside of the box, that is, the kitchen area is covered with a wooden finish.
Trajanje projekta: This house was first built in March 2001, and the renovation was completed in August 2019 in Fukui-city, Fukui Pref. in Japan.
Člani ekipe: Ryumei Fujiki
Yukiko Sato
Zasluge za slike: Image #1: Photographer Hiroshi Ueda
Image #2: Photographer Takeshi Taira
Image #3: Photographer Hiroshi Ueda
Image #4: Photographer Hiroshi Ueda
Image #5: Photographer Takeshi Taira