Tatsuhiro Nishimoto ᱨᱮᱱᱟᱜ House in Yamate चेत् ओड़ाक़ ᱫᱚ ᱟᱨᱠᱤᱴᱮᱠᱪᱟᱨ, ᱤᱢᱟᱨᱚᱛ ᱟᱨ ᱜᱟᱲᱚᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2023 A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾
ᱥᱳᱱᱟᱟᱨᱠᱤᱴᱮᱠᱪᱟᱨ· 2023
House in Yamate चेत् ओड़ाक़
Tatsuhiro Nishimoto ᱞᱮᱠᱟᱛᱮ
ᱟᱨᱠᱤᱴᱮᱠᱪᱟᱨ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ
ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ
#150720 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪᱰᱤᱡᱟᱭᱤᱱ
House in Yamate चेत् ओड़ाक़ ᱵᱟᱵᱚᱛ ᱛᱮ
उनिकिन निर्मोल आर सिसिर रिदाक् सिपाआउत कोण जागा रे बोलोक् गे ता साम्लाव केदा आर सेरमा भितिर रे सिपाआउत धोरोम दाड़ेआक् लेका ठाञ माप् बानाव केदा। जाती आड़ी रे कांच लगाव केते सिपाआउत पुराओ बासा जागा तेयार आकादा। दोहो ते, निर्मोल सिंगे आर दाक् खोन बांचाओ लेका, उनिकिन मित् मारांग आर एकटागे मोंडे योजना केदा। मोंडे दो बंद जागा बाङ काना, मेनखान खुला जागा काना जाहांरे हावा आर मोनोते सेनेच् दाड़ेआक् आ। उनिकिन आसा करेत् जे, नुवा ओड़ाक् बासा केते रुहुयाक् को आगे खोन जास्ति उजाड़ आर हावा मोनेआ आर उनिकिन्आक् महना दिनाम जीवन लेगेम होयोक् आ।
ᱢᱟᱱᱟᱱ
A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
House in Yamate चेत् ओड़ाक़ ᱫᱚ A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱵᱷᱟᱞᱟᱭ ᱛᱮ ᱵᱷᱟᱞᱟᱭ ᱟᱨ ᱥᱩᱱᱫᱚᱨ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ House in Yamate चेत् ओड़ाक़ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾
ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ
ᱯᱨᱮᱥ ᱠᱤᱴ
ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾
- ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ
- The angle of the sunrise at the summer and winter solstices entering the site was investigated, and a floor plan was designed to allow the sunrise to enter the building, with glass walls. Then, in order to protect the living space from the summer sun and rain, an independent large roof was planned. By creating an independent roof, we thought that the space would not be closed, but would be an open space where wind and consciousness could pass through.
- ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ
- To give the appearance of a large roof supported by four pillars, H-shaped steel beams (250 x 250) were used for the beams, which were hidden inside the roof. In addition, to avoid making the columns too thick, circular steel columns of 267.4 x 12.7 (STK400) were used. In this way, the relationship between the stable roof and the independent house was stabilized.
- ᱴᱮᱜ ᱠᱚ
- House,Residential, Japan, Roof, Wood,
- ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ
- A new RC digging garage was built at the location facing the road on the east side. The frame of the garage is also the foundation of the steel-frame structure. The residential portion is a wooden structure, completely separated from the steel structure. By completely separating the two structures, the residential portion was made independent, and was designed to take advantage of the different characteristics of each.
- ᱯᱨᱮᱨᱚᱱᱟ
- The site was an old development subdivision with a lowered east side. It was surrounded by houses. The height of the site is one level higher than the houses on the east side, and we wanted to create a plan that would allow the sunrise to enter the living space when standing on the site. When I visited Varanasi in India when I was a student, I saw people praying for the sunrise by scooping water from the Ganges River with both hands. I wanted to create a living space filled with such light.
- ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ
- The project started in Iwakuni in June 2018 and finished in December 2021
- ᱴᱤᱢ ᱥᱮᱫᱟᱭ ᱠᱚ
- Toshiro Watanabe
- ᱪᱤᱛᱟᱹᱨ ᱥᱟᱹᱦᱟ
- photo:Kenji Masunaga
ᱥᱯᱚᱱᱥᱚᱨᱰ
Designers.org ᱠᱷᱚᱱ ᱯᱟᱨᱚᱢ ᱛᱟᱞᱟᱥ
ᱟᱞᱮᱭᱟᱜ ᱵᱤᱜᱽᱭᱟᱯᱚᱱ ᱥᱟᱹᱜᱟᱹᱭ ᱠᱚ ᱠᱷᱚᱱ ᱯᱨᱚᱰᱟᱠᱴ, ᱥᱮᱵᱟ ᱟᱨ ᱢᱚᱠᱟ ᱩᱫᱩᱜ ᱢᱮ᱾
ᱟᱨᱦᱚᱸ ᱠᱷᱚᱡ ᱢᱮ
ᱥᱟᱹᱜᱟᱹᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ
ᱢᱤᱫ ᱞᱮᱠᱟ ᱠᱮᱴᱮᱜᱚᱨᱤ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱯᱩᱨᱥᱠᱟᱨ ᱧᱟᱢᱟᱠᱟᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱧᱮᱞ ᱢᱮ, ᱡᱚᱜᱭᱟᱛᱟ ᱧᱮᱞ ᱛᱮ ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱᱟ᱾
