ʻO Solarbreaker Puka Pale Kihi Photovoltaic na Jaroslaw Markowicz he mea lanakila hanohano loa o ka 2020 A' Design Award Kala ma ka Māhele Hoʻokūkū Hoʻolālā Lako Kūkulu a me ʻĀpana Kūkulu Hale.
KalaʻĀpana Kūkulu· 2020
Solarbreaker Puka Pale Kihi Photovoltaic
Mea Kūʻai: Phoenix Enterprise
Mea Lanakila A' Design Award Kala ma ka Māhele ʻĀpana Kūkulu
Mea Lanakila i Hōʻoia ʻIa
Hōʻoia i ke Kūlana Makana no #102697Ka Hoʻolālā
E Pili Ana iā Solarbreaker Puka Pale Kihi Photovoltaic
He puka pale kihi photovoltaic ka Solarbreaker e hoʻohuli ana i nā ʻili hale i mau mea hana ikehu. Hoʻokumu ʻia ka ʻōnaehana ma luna o nā ʻano alumini i unuhi ʻia kahi e kau ʻia ai nā papa lā. Ua ʻalo ʻia kēlā me kēia papa ma ka ʻāpana kanahākūmālima o kekahi kihi no ka ʻoi aku o ka pono, a hiki i hoʻokahi mōkuʻāina o hoʻokahi mika huinahā ke hoʻohana i he ʻumikūmāono kukui LED. ʻAneʻane ʻaʻohe mea hana e pono ai ka hoʻopili ʻana, no ka mea, ua kau ʻia nā ʻano ma ke kau a laka ma lalo o ko lākou kaumaha ponoʻī. Hūnā ʻia nā uea ma loko o nā ʻano. Ma waho aʻe o nā ʻili hale, hiki i kēia mau ʻāpana ke hana i nā pā, nā pale a me nā uhi puka.
Ka Hoʻomaikai
E Pili Ana i ka A' Design Award Kala
Ua lanakila ka hoʻolālā Solarbreaker Puka Pale Kihi Photovoltaic i ka A' Design Award Kala, he ʻike hoʻohanohano nui loa i hāʻawi ʻia i nā hoʻolālā kiʻekiʻe loa, nani a kupaianaha. He mau hana ʻālohilohi loa a hana noʻeau nui nā lanakila Kala e hōʻike ana i ka loea, ka makakoho a me ka ʻoi aku o ka noʻonoʻo o kā lākou poʻe hoʻolālā. Manaʻo ʻia ʻo ka hoʻolālā Solarbreaker Puka Pale Kihi Photovoltaic he hana kupaianaha, kūlana ʻoi aku, ʻoihana kiʻekiʻe a hou loa. ʻO kēia hoʻolālā i lanakila i ka A' Design Award Kala he mea hoʻokumu kūpono loa, mahalo ʻia e hāʻawi i ka pōmaikaʻi a hoʻoneʻe i nā palena o ka hana noʻeau, ka ʻepekema, ka hoʻolālā a me ka ʻenehana. He mea i ʻeleu ʻia e nā mea he nui ka hoʻolālā Solarbreaker Puka Pale Kihi Photovoltaic e hoʻāla i ka makemake, lawe mai i nā manaʻo maikaʻi a hoʻāla i ka kamahaʻo a me ka mahalo.
Ma Hope o ka Hoʻolālā
ʻEke Nūhou
Nā hōʻoia, nā lālā hui a me nā kikoʻī ʻenehana i hāʻawi ʻia e ka mea hoʻolālā.
- Nā ʻAno Kūʻokoʻa
- Our solutions make photovoltaics an integral part of the building. Solarbreaker products make possible to use the entire building facade for energy production without disturbing its aesthetics. The system has been developed to give the greatest configuration options in the simplest possible form. The main application of Solarbreaker are building facades, however, using the flexible capabilities of the system we can build barriers, fences, window blinds or free-standing blinds from it.
- Nā Ana a me ka Hoʻopili
- Basic module dimensions 1000mm x 120 mm x 1000mm
- Nā Lepili
- Solar panels, photovoltaic, facade shutter, architecture, fence
- ʻEnehana Hana
- The solarbreaker design is based on extruded profiles. Solar panels are mounted on the main profile. This method of assembly allows to easily separate materials so that the product can be recycled. The solution has been designed to be easy to install. Extruded profiles fold like lego blocks and allow for wide arrangement possibilities.
- Pilikia Hoʻolālā
- The biggest challenge of the project was to create a product that would retain its lightness despite the internal electronics and photovoltaic panel
- Noiʻi
- The main research was to develop a product which can be adapted to almost any building. This required extensive analysis of the various buildings and their constructions. These studies have resulted in a design that is very easy to assemble. The first tests were made on 3D printed models. The wing loads were tested many times, which allowed the development of aluminium profiles with the required parameters.
- Hoʻoulu Manaʻo
- The main inspiration for the product was the sun protection solutions existing on the market. Large glazed facades, unfortunately, make the rooms get very hot, the sun from the south can be a problem, however, we wanted to turn this disadvantage into an advantage. Solarbreaker allows to use almost the entire building for electricity production and at the same time protect it from the sun.
- Ka Lōʻihi o ka Papahana
- the project was developed in Warsaw. Conceptual work lasted from november 2018. After many prototypes and tests, the project was finally implemented in January 2020.
- Kaʻina Hana
- Connecting profiles and building structures requires almost no tools. The structure is built directly on site from components. Finished profiles with photovoltaic panel just need to be put on the mounting and pressed - under the pressure of weight the element will lock. Solarbreaker is equipped with the elements necessary to connect it to the home power grid. Cable connections are hide inside the profiles, therefore the solution is durable and resistant to weather conditions. The 1m2 module will produce enough energy to power sixteen LED bulbs (80wat in total). Each panel is tilted at an angle of 45 degrees, which ensures the highest efficiency.
- Nā Lālā Hui
- Jarosław Markowicz, Daniel Ziomek
Kākoʻo ʻIa
ʻImi ma ʻō aku o Designers.org
E ʻimi i nā huahana, nā lawelawe a me nā manawa mai kā mākou mau hoa hoʻolaha.
Hou Aku e ʻImi Ai
Nā Hoʻolālā Pili
E ʻimi i nā hoʻolālā lanakila hou mai ka māhele like, i koho ʻia ma ka waiwai.
