Arch Apyka, Apyka Atukupe'ỹva Edvard Glazebrook omba'apóva

Arch Apyka, Apyka Atukupe'ỹva Edvard Glazebrook omba'apóva ha'e rembiporuarã oñemba'eguaséva 2021 A' Design Award Brónse pegua Mba'epyru Jejapo Ñeha'ã Categoría-pe.

BrónseMba'epyru· 2021

Arch Apyka, Apyka Atukupe'ỹva

Edvard Glazebrook -gua

A' Design Award Brónse Rembiporuarã Mba'epyru Categoría-pe

11,198

Premio Rembiporuarã Oñemoneĩva

Emoneĩ Premio Reko #106853 Peg̃ua

Ehecha A' Design Award-pe Marandu Myasãi Mba'ete Jeguerohory

Sa'y

Diseño

Arch Apyka, Apyka Atukupe'ỹva Rehegua

Arch ha'e peteĩ apyka ha peteĩ apyka atukupe'ỹva ojejapo va'ekue yvyra pino ojekutu ha oñemongy'a hũ laminado reheve. Pe diseño ojejapo hína forma ha figura sencilla ha ojejapyrûva rehe, ohechauka hag̃ua pe mueble peteĩcha ha lógico. Po arco peteĩcha oñondive ojapo umi apyka py ha atukupe, upe apyka atukupe'ỹva katu ojejapo mbohapy arco mbytépe reheve, ojoja mbytépe. Opavave umi táva ojekuaa peteĩ yvyra laminado plancha guive CNC router-pe, upe rire ojejoaju ha oñemboja yvyra clavo-pe. Umi kurva omombarete pe mueble umi hendápe ipy'ỹivéva.

Jeguerohory

A' Design Award Brónse Rehegua

Arch Apyka, Apyka Atukupe'ỹva ohupyty A' Design Award Brónse, peteĩ ñehechakuaa heta prestigioso oñeme'ẽva diseño sobresaliente-pe ojekuaáva creatividad, ingenio ha astucia rupi. Umi ganador Brónse ha'e artefacto hábil ha creativo ohechaukáva experiencia, imaginación ha recurso umi diseñador-pe. Oñeha'ãrõ Arch Apyka, Apyka Atukupe'ỹva ha'eha peteĩ objeto ojehayhúva, admirado ha estimado, profesional ha innovador. Ko diseño ohupytýva A' Design Award Brónse ombojoaju mejor práctica arte, ciencia, diseño ha tecnología rehegua ha iporãiterei detalle rehe. Arch Apyka, Apyka Atukupe'ỹva ombohory necesidad, ohupyty ipotapy, ombovy'a sentimiento ha ohenói curiosidad.

Diseño Rapykuéri

Marandu Aty

Diseñador ome'ẽva'ekue crédito, aty pegua ha mba'e técnico.

Mba'e Iñambuéva: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Tuichakue ha Ñemyenyhẽ: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Ñe'ẽ Rape: Wood, Chair, Stool, Pine wood, Arches, Curve
Ñeapopy Tecnología: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Diseño Jepy'apy: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Ñesẽheka: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Inspiración: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Proyecto Ára Tuichakue: The project started in march 2020 - and finished in late May 2020.
Mba'apo Rape: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Patente-kuéra: Copyrights belong to Edvard Glazebrook, 2020
Aty Rembiguái: Edvard Glazebrook