Dizajn Cloud Enterijer stambenog apartmana za odmor od dizajnera Jui Min Chen je visoko cijenjeni dobitnik prestižne nagrade 2022 Željezna nagrada A' Design Award u kategoriji Dizajn Unutrašnjeg Prostora i Izložbi.
ŽeljezoEnterijer· 2022
Cloud Enterijer stambenog apartmana za odmor
autor Jui Min Chen
Klijent: Muen interior Design Co.,Ltd
Dobitnik nagrade Željezna nagrada A' Design Award u kategoriji Enterijer
Verificirani dobitnik nagrade
Verificirajte status nagrade za #117359Dizajn
O dizajnu Cloud Enterijer stambenog apartmana za odmor
Cloud je apartman za odmor u stilu loft-a u Yilanu, na Tajvanu. Dizajn slijedi ideju oduzimanja, integrirajući stambene funkcije u jednostavne linije i osnovne boje koje prekrivaju noseću strukturu zgrade. Ukupna visina enterijera iznosi 380 cm, a ukupna površina 40 kvadratnih metara. Propusni materijali i lebdeće stepenište izrađeno od tankih čeličnih ploča i borove šperploče proširuju vidno polje i smanjuju osjećaj sputanosti u malom prostoru. Zakrivljeni oblici vode pogled iz svakog dijela prostora prema zelenilu vani.
Priznanje
O nagradi Željezna nagrada A' Design Award
Cloud Enterijer stambenog apartmana za odmor je pobjednik Željezne nagrade A' Design Award, prestižnog priznanja koje se dodjeljuje dobrim dizajnima što ispunjavaju profesionalne i industrijske zahtjeve očekivane od dobro dizajniranih kreacija. Željezni pobjednici pokazuju veliku vještinu, visoku specijalizaciju, stručno razumijevanje i kreativne kapacitete svojih stvaralaca. Očekuje se da Cloud Enterijer stambenog apartmana za odmor bude visoko cijenjena, voljena i njegovana kreacija koja je praktična i inovativna. Ovaj dizajn koji je osvojio Željeznu nagradu A' Design Award integrira najbolje industrijske prakse i ima kompetentne tehničke karakteristike povezane sa znanjem i talentom. Cloud Enterijer stambenog apartmana za odmor se poštuje zbog svoje temeljitosti i dizajniran je da pruži poboljšanja kvaliteta života koja pomažu da svijet postane bolje mjesto.
Iza dizajna
Press komplet
Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.
- Jedinstvena svojstva
- This loft style vacation apartment is with the idea of subtraction. The design integrates needs and functions, and incorporates living functions into the aesthetics of the space, using simple lines and primary colors to cover the supporting structure of the building. The use of permeable building materials throughout the project extends the vision and reduces the sense of oppression in small spaces.
- Dimenzije i pakovanje
- The full height of the interior is 380 cm. The height of the lower part of the mezzanine floor is 120 cm, and the total size is 40 square meters. The height above the mezzanine floor is 163.5cm, and the size is 16.5 square meters. The balcony is about 5 square meters. The dressing room is about 3.3 square meters. The thickness of the punching plate is 3mm, the diameter of the hole is 5mm, and the spacing is 5mm.
- Oznake
- loft, penetrating, arcs, suspended stairs, subtraction
- Tehnologija proizvodnje
- A lightweight staircase made of thin steel panels and pine plywood is the visual axis of the design, and a different type of twine staircase is used to increase the penetration of the space. In addition to the reinforcement of the suspended staircase through the connection with the steel frame inside the wall, the main support comes from the steel rope wrapped with twine, and the steel lock and special bandage to connect the floor to the ceiling to strengthen the staircase support.
- Dizajnerski izazov
- The designer extended the skeleton from the inner edge of the wall for external support through a hole-cutting technique on the facade wall that connects the external wall of the bathroom, the staircase and the dressing room to increase the structural strength, and welded the light steel staircase to this skeleton so that the floor can achieve a sense of visual floating.
- Istraživanje
- Due to the limited space, the designer found that there was about 3.3 square meters of space left in the duct room above the bathroom, excluding the heat storage equipment, during the structural measurement and analysis. After detailed ergonomic measurements, a partition is opened in the wall above the bathroom, and the L-shaped floor-to-ceiling steel platform is used to strengthen the partition structure and add a simple dressing room.
- Inspiracija
- The design motive is to create a sense of vacation in a small space, and to combine the beauty of the mountains and forests, using a curved shape to symbolize the embrace of greenery through the space. The visual guidance is achieved by using the cohesiveness of lines, which leads every space inside to the outside and creates a strong connection with outdoor nature.
- Trajanje projekta
- The project started in October 2019 in and finished in January 2020 in Yilan, Taiwan.
- Tok rada
- The stairs are designed with a perforated shape, allowing sunlight to penetrate through the holes, adding a rhythm of light and shadow and bringing visual interest. In order to strengthen the structure of the mezzanine, light strip is designed on the external wall of the mezzanine dressing room to link the structure between the old and new walls, so that the old and new structures can have a buffer space for deformation when the temperature changes.
- Autorstvo slika
- Image #1: Mooten Studio, Cloud, 2020.
Image #2: Mooten Studio, Cloud, 2020.
Image #3: Mooten Studio, Cloud, 2020.
Image #4: Mooten Studio, Cloud, 2020.
Image #5: Mooten Studio, Cloud, 2020.
Sponzorisano
Istražite izvan Designers.org
Otkrijte proizvode, usluge i prilike od naših oglašivačkih partnera.
Još za istraživanje
Srodni dizajni
Istražite više nagrađenih dizajna iz iste kategorije, odabranih prema zaslugama.