Tom Mackenzie 嘅作品 Telescopicgoal 可調式足球龍門

由設計師 Tom Mackenzie 創作嘅 Telescopicgoal 可調式足球龍門係備受推崇嘅 2023 A' Design Award 銅獎得獎作品，獲獎類別為運動用品設計。

銅運動用品· 2023

Telescopicgoal 可調式足球龍門

由 Tom Mackenzie

客戶: Tom Mackenzie

運動用品類別嘅 A' Design Award 銅獎得獎者

36,716

經驗證嘅獲獎者

驗證設計 #150769 嘅獲獎狀態

訪問網站喺 A' Design Award 查看新聞稿獎項徽章

色彩

設計

關於 Telescopicgoal 可調式足球龍門

Telescopicgoal係一款專為唔同年齡同技術水平嘅球員而設計嘅可調式足球龍門。呢個龍門可以調校成35種尺寸,闊度由2米到5米、高度由1米到2米唔等,回應咗唔同年齡組別之間唔統一嘅尺寸指引問題。門柱同橫樑均採用耐候鋁管製造,強度高之餘重量又輕。高度以彈簧夾調校,闊度就靠球網上印製嘅環扣同彩色勾扣嚟設定。框架可以摺埋成四件,收納入帶輪嘅袋入面,方便攜帶。共有三款型號,分別適用於軟地面同全地形場地。

榮譽認可

關於A' Design Award 銅獎

Telescopicgoal 可調式足球龍門是 A' Design Award 銅獎得主，這是授予以創造力、獨創性和敏銳見長的傑出設計的極具聲望的認可。銅獎得主是技藝嫻熟、創意驚人的作品，印證了其設計師豐富的經驗、想像力與機智。預計Telescopicgoal 可調式足球龍門將成為一件備受推崇、令人欽佩且被珍愛的物品，兼具顯著的專業性與創新性。這件贏得 A' Design Award 銅獎的設計融入藝術、科學、設計和技術領域的最佳實踐，並因注重細節而出類拔萃。Telescopicgoal 可調式足球龍門出色地滿足需求，觸動渴望，迷住情感，並吸引好奇心。

設計背後

新聞資料包

由設計師提供嘅製作人員名單、團隊成員同技術詳情。

獨特屬性: Telescopicgoal is a football goal that can be adjusted to 35 sizes ranging from 2m to 5m wide and 1m to 2m high, making them suitable for players of all ages and skill levels. One of the key strengths of telescopic goals is the meticulous engineering design that gives the goals such versatility, allowing them to be folded down into just 4 pieces and stored in an easily transported wheelie bag. Made from weather resistant aluminium that balances strength and portability while guaranteeing long-lasting life Telescopicgoal come in 1 of 3 models; the T1 and T2 for soft grounds, and the T3 suitable for any surface.
尺寸同包裝: Telescopicgoal can be set up to 35 different sizes. The largest size Width 5000mm x Depth 1600mm x Height 2000mm. The smallest size Width 2000mm x Depth 800mm x Height 1000mm. The Telescopicgoal folds down into a Wheelie Bag size Width 1150mm x Depth 400mm x Height 200mm.
標籤: Adjustable, Football, Goal, Portable, Soccer
生產技術: The posts and crossbar are made from aluminium tubing and are circa 68mm in diameter, designed to replicate that match day feel of the ball hitting and bouncing off the frame of the goal. It also increases the strength for both ball impacts and safety with children hanging on the crossbar. The other aluminium tubing has been made smaller which reduces the weight of the goal and minimizes costs. The aluminium extruded tubing has plastic sleeves on the inside to stop the smaller tube extending too far.
設計挑戰: The initial design used plastic, but after testing the prototype was deemed too weak. Further market research was undertaken resulting in a modular offering all upgradeable parts, giving the consumer the choice of 3 Telescopicgoals T1, T2 and T3 which all can be adjusted to 35 different sizes. The T1 and T2 use a spike in the ground with the T1 having a fabric cross bar and the T2 an aluminium crossbar. With T1 and T2 limited to soft grounds the T3 with full frame can be used on all surfaces.
研究: One of the first steps in researching was to read the international standards BS 8461:2005, BS 8462:2005 and EN16579. Based on these standards the net support was fixed at 800mm from the top post and the base depth at 80% of the height of the goal. To allow the net to be used at different goal sizes the angle of the back stanchion was fixed at 68 degrees and remains at this angle independent of the height. The diameter of the crossbar meets and surpasses the required 300N vertical load test.
靈感: While living in the UK, Tom struggled to find long lasting, easy to assemble goals as well as inconsistency in the recommended goal sizes for different aged children. After 4 years of research, design, development, and testing, Telescopicgoal was created, ensuring a high quality, adjustable goal capable of 35 different sizes and therefore able to adapt to any age or skill level. Designed to utilise space and grow alongside your children, Telescopicgoal’s makes football accessible for everyone.
項目時長: Started the research in October 2018 in the UK and launched the website in New Zealand in November 2022 selling Telescopicgoals.
操作流程: The height can be adjusted by a spring clip due to the potential load of the crossbar. As there is less load on the crossbar friction locking clamps were used. The net is in 2 parts with the right side net separate from the main net. The width of the goal is set by loops with printed dimensions on the top of the net which carabiners connect to. The rest of the net is connected to the frame with coloured carabiners that match coloured loops, ensuring the net can be easily connected.
專利: Telescopicgoal subject to International PCT Patent application.