SS2019 Splash Silicone Rubber Clothing Izembatho Zemfashini ngu-Viktoria Marchev

Umdwebo SS2019 Splash Silicone Rubber Clothing Izembatho Zemfashini ngu-Viktoria Marchev ungumnqobi ohlonishwa kakhulu womklomelo odumile we-2021 Umklomelo Wesiliva we-A' Design Award Esigabeni Somncintiswano se-Ukudizayina Imfashini.

IsilivaImfashini· 2021

SS2019 Splash Silicone Rubber Clothing Izembatho Zemfashini

ngu Viktoria Marchev

Iklayenti: Viktoria Marchev

Umnqobi we-Umklomelo Wesiliva we-A' Design Award Esigabeni se-Imfashini

64,942

Umnqobi Womklomelo Oqinisekisiwe

Qinisekisa Isimo Somklomelo se-#110147

Vakashela Isayithi Buka ku-A' Design Award Isitatimende Sabezindaba Ibheji Yomklomelo

Imibala

Ukuklama

Mayelana ne-SS2019 Splash Silicone Rubber Clothing Izembatho Zemfashini

'Splash' liqoqo elenziwe ngerabha yesilicone, impahla eguquguqukayo umklami obesebenzise ukudala imiqondo yakhe yomoya wesayensi-fiction kusukela ngo-2014. Umklami wathuthukisa ubuchwepheshe obukhethekile bokubumba nokuthela ukwakha izingubo zakhe zesilicone. Izingubo ezidalwayo zinobungane kakhulu nemvelo njengoba kungekho mfucuza ngesikhathi senqubo yokudala, azingeni amanzi futhi kulula ukuziklanywa. Isihloko esithi 'splash' sibhekisela kubuchwepheshe, okubandakanya ukufaka amanzi phakathi kwezingqimba zesilicone.

Ukuqashelwa

Mayelana ne-Umklomelo Wesiliva we-A' Design Award

SS2019 Splash Silicone Rubber Clothing Izembatho Zemfashini iwinile uMklomelo Wesiliva we-A' Design Award, ukwaziswa okuhloniphekile ngokungajwayelekile okunikezwa imiklamo esezingeni eliphezulu, ebukekayo nethinta kakhulu. Abawinile beSiliva yimisebenzi egqamile kakhulu nedala kakhulu ebonisa ubungcweti obuphawulekayo, italente nobuhlakani babaklami babo. SS2019 Splash Silicone Rubber Clothing Izembatho Zemfashini ilindeleke ukuba ibe ngumsebenzi omuhle wesibonelo, onobungcweti obuphawulekayo nezinto ezintsha ezijulile. Lo mklamo owinile uMklomelo Wesiliva we-A' Design Award uyinto entsha ebonakala kakhulu nethakazelisayo esiza futhi isunduza imingcele yobuciko, isayensi, ukuklama nobuchwepheshe. SS2019 Splash Silicone Rubber Clothing Izembatho Zemfashini iyinto enomhawu omkhulu kuyo evusa izifiso, ilethe imizwa emihle futhi ivuse ukumangala nokuxakeka.

Ngemuva Kokuklama

Iphakheji Yabezindaba

Ama-credit, amalungu eqembu nemininingwane yobuchwepheshe ehlinzekwe ngumklami.

Izici Ezihlukile: The designer has been experimenting with silicone rubber since 2014. The molding-casting technology requires precise preparation, the emphasis is more on the design process, as the making itself is limited to the time of pouring. Splash is an advanced version of the Spring-Summer 2015 Clones, which earned the designer the category of innovative designers on Not Just A Label. The title Splash refers to the technology which involves liquid being injected between layers of silicone.
Izilinganiso Nokupakisha: There are 18 looks within the collection, sizes ranging from bodysuits, short dresses and one long dress.
Bodysuits: Body length: 60 cm, bust: 70 cm, waist: 60 cm, weight: 4 lb,
Short dress: Length: 70 cm, bust: 70 cm, waist: 60 cm, hips: 80 cm, weight: 4 lb
Yellow dress: Overall length: 135 cm, bust: 70 cm, waist: 60 cm, hips: 80 cm, weight: 14 lb
Amathegi: fashion, apparel silicone, rubber, innovation, sci-fi
Ubuchwepheshe Bokukhiqiza: Silicone rubber
Molding-casting
Pouring
Inselele Yokudweba: After several years of experimentation mostly on swimwear, one of the biggest challenges in this collection was to make a big-scale piece. An attractive yellow dress with a huge round skirt and circle "cutouts". The designer faced the challenge to find balance between strength and fragility. Because of the shortness of the curing time of silicone rubber and the size of the project the design itself needed a lot of attention as minor mistakes could result in repeating the whole making process.
Ucwaningo: The designer has been experimenting with silicone rubber for a couple of collections (5 silicone rubber collections so far), trying something new each season to come. Innovations in each collection:

SS2015 Clones - first silicone rubber collection - the foundation of the technology
SS2017 Skin Deep - introducing transparent hard silicone vests
FW2017 In the cocoon - expanding the volume to big-scale pieces
SS2018 Splash - injecting water between layers of silicone to create the ‘splash’ effect
FW2019 Possession - complete, multiple-piece outfits made of silicone rubber, including footwear
Ugqozi: The designer loves to define garments as an abstract extension of the human body. For this particular collection the designer drew inspiration from her personal experiences learning about the importance of water within the healthy functioning of the body, how it impacts blood structure. She expressed it in two ways: using circles and injecting water and other colorful liquids between layers of silicone as a symbolic representation of this healthy flow.
Ubude Bephrojekthi: The development of the technology started in 2014 with the designer's first silicone rubber collection Spring-Summer 2015 Clones and has been upgraded every year. Splash conceived in 2018 and was completed in August, 2018 and was showcased at New York Fashion Week in the framework of Oxford Fashion Studio's Emerging Designer Showcase in September at Pier59 Studios.
Ukuhamba Kokusebenza: The pieces made of silicone rubber do not require any sewing, therefore there are no real seams or trimmings, which creates a very neat appearance. The pieces are simultaneously flexible and have a strong hold, which feature eliminates wrinkles. The cleaning of the pieces is highly-efficient as the surface is waterproof, they don't require machine wash, can be wiped off with light detergents, alcohol for disinfection and can be patted dry with paper towel or any water absorbent cloth. The same way the pouring process allows no waste during the production as there is no excess material in the mold.
Amapathenti: Patent No.
Amalungu Eqembu: Viktoria Marchev (Viktoria Tisza at the time of the creation)
Amakhredithi Ezithombe: Runway photography and videography: Oxford Fashion Studio
Main image photography: Charles Hundley, The Runway Authority
Runway model for main image: Dani Le Rose/Dani Rook
Runway model for Optional Image #1: Hanasha Ch.
Runway model for Optional Image #2: Tifannie Kramer
Runway model for Optional Image #3: Stephanie Bardavid
Runway model for Optional Image #4: Mimi Tao

Additional documentation - Campaign
Photography: Dobrin Marchev www.dobrinmarchev.com
Model: Ana Eberg @Red Model Management
Make-up: Anastasia Eisenberg