JunXiang Cheng and Yi Yang 的作品 Sprout 自行车

设计师 JunXiang Cheng and Yi Yang 的作品 Sprout 自行车荣获了极具声望的 2022 A' Design Award 铁奖，竞赛类别为3D打印成型与产品设计。

铁3D打印· 2022

Sprout 自行车

设计师： JunXiang Cheng and Yi Yang

客户: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

3D打印类别A' Design Award 铁奖获奖者

32,018

已验证的获奖者

验证 #137286 的获奖状态

在A' Design Award上查看新闻稿获奖徽章

色彩

设计作品

关于 Sprout 自行车

Sprout 是一款通过三维打印制造的自行车。车架形态经由拓扑优化生成,仅在结构需要之处布置材料,从而降低了材料总用量。采用有限元法进行静态应力分析,验证了车架结构的稳定性。最终模型以高密度尼龙打印成型。该自行车长 1630 毫米、宽 600 毫米、高 832 毫米。三维打印免去了昂贵模具的需求,因此每一副车架都能实现个性化定制设计。

荣誉认可

关于A' Design Award 铁奖

Sprout 自行车是 A' Design Award 铁奖得主，这是授予满足人们对设计精良的创作所期待的专业与工业要求的优良设计的声望认可。铁奖得主展现出其创作者的高超技艺、高度专业化、专家级的理解力和创造能力。预计Sprout 自行车将成为一件备受推崇、令人钦佩且被珍爱的创作，既实用又创新。这件赢得 A' Design Award 铁奖的设计整合了行业最佳实践，并拥有与专业知识和才华相结合的称职技术特性。Sprout 自行车因其严谨而受到尊重，旨在提供有助于让世界变得更美好的生活品质改善。

设计幕后

媒体资料包

由设计师提供的致谢、团队成员及技术详情。

独特属性: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
尺寸与包装: Length 1630mm, width600mm, height 832mm
标签: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
生产技术: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
设计挑战: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
研究: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
灵感: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
项目周期: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
操作流程: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
团队成员: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao