Arch Alaga, Alaga Aláìnídìí láti ọwọ́ Edvard Glazebrook jẹ́ aṣẹ́gun olókìkí púpọ̀ ti 2021 Àmì-ẹ̀yẹ Idẹ A' Design Award nínú Ẹ̀ka Ìdíje Àpẹẹrẹ Ohun-èlò Ilé.
IdẹOhun-èlò Ilé· 2021
Arch Alaga, Alaga Aláìnídìí
látọ̀wọ́ Edvard Glazebrook
Aṣẹ́gun Àmì-ẹ̀yẹ Idẹ A' Design Award nínú Ẹ̀ka Ohun-èlò Ilé
Aṣẹ́gun Àmì Ẹ̀yẹ Tí a Jẹ́rìísí
Jẹ́rìísí Ipò Àmì Ẹ̀yẹ fún #106853Àpẹrẹ Náà
Nípa Arch Alaga, Alaga Aláìnídìí
Arch jẹ́ alaga àti ìjókòó aláìnídìí tí a fi igi pine tí a gbẹ́ tí a sì kun ní dúdú, tí a fi ọ̀pọ̀ ìpele pọ̀, ṣe. Àpẹẹrẹ náà dá lórí àwọn ìrísí àti àwọn àpẹrẹ tí ó rọrùn tí ó sì ń tún ara wọn ṣe, èyí tí ó fún ohun ọ̀ṣọ́ náà ní ìrísí tí ó dọ́gba tí ó sì bá ìmọ̀ràn mu. Àwọn àkàsò márùn-ún tí ó jọra ni wọ́n fi ṣe àwọn ẹsẹ̀ àti ẹ̀yìn alaga náà, nígbà tí ìjókòó aláìnídìí náà jẹ́ àkópọ̀ àwọn àkàsò-ìdajì mẹ́ta tí wọ́n pàdé ní àárín gbùngbùn. Gbogbo àwọn ẹ̀yà ni a gé láti orí àwo igi tí a fi ọ̀pọ̀ ìpele pọ̀ pẹ̀lú ẹ̀rọ CNC router, lẹ́yìn náà ni a fi lẹ̀mọ́ ara wọn tí a sì so pọ̀ pẹ̀lú àwọn dowel igi. Àwọn àyíká náà mú kí ohun ọ̀ṣọ́ náà lágbára ní àwọn ibi tí ó ti jẹ́ aláìlera jùlọ.
Ìdánimọ̀ Náà
Nípa Àmì-ẹ̀yẹ Idẹ A' Design Award
Arch Alaga, Alaga Aláìnídìí jẹ́ olùborí Àmì-ẹ̀yẹ Idẹ A' Design Award, ìdánimọ̀ olókìkí gan-an tí a fún àwọn àwòṣe tó tayọ tí wọ́n yàtọ̀ nípasẹ̀ ìṣẹ̀dá, àrékérekè àti ọgbọ́n inú. Àwọn olùborí Idẹ jẹ́ àwọn ohun èlò tó ní ìjáfáfá gan-an tí wọ́n sì ní ìṣẹ̀dá tó yani lẹ́nu tí wọ́n ń ṣe ẹ̀rí ìrírí gbígbòòrò, ìrònú àti ọgbọ́n àwọn olùṣàwòṣe wọn. A retí pé Arch Alaga, Alaga Aláìnídìí yóò jẹ́ ohun tí a kà sí gidigidi, tí a gbóríyìn fún tí a sì nífẹ̀ẹ́, tó jẹ́ ti ọ̀jáfáfá lọ́nà tó ṣe pàtàkì tó sì ní ìmúṣẹ̀dá tuntun. Àwòṣe tó borí Àmì-ẹ̀yẹ Idẹ A' Design Award yìí ń kó àwọn ọ̀nà tó dára jùlọ nínú iṣẹ́ ọnà, sáyẹ́ǹsì, àwòṣe àti ìmọ̀-ẹ̀rọ jọ, ó sì tayọ nítorí àfiyèsí rẹ̀ sí àwọn àlàyé kékeré. Arch Alaga, Alaga Aláìnídìí ń tẹ́ àwọn ohun tí a nílò lọ́rùn lọ́nà àgbàyanu, ó ń fọwọ́ kan àwọn ìfẹ́ inú, ó ń gbà ọkàn ó sì ń fa ìfẹ́ láti mọ̀ mọ́ra.
Lẹ́yìn Àpẹrẹ Náà
Àkójọ Ìròyìn
Àwọn ẹ̀tọ́, àwọn ọmọ ẹgbẹ́ àti àlàyé ìmọ̀ ẹ̀rọ tí olùṣàpẹrẹ pèsè.
- Àwọn Ohun Àkànṣe
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Ìwọ̀n àti Àpò
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Àwọn Àkọlé
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Ìmọ̀-ẹ̀rọ Ìṣelọ́pọ̀
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Ìpèníjà Àpèsè
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Ìwádìí
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Ìmísí
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Àkókò Iṣẹ́ Àkànṣe
- The project started in march 2020 - and finished in late May 2020.
- Ìlànà Ìṣiṣẹ́
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Àwọn Ìwé-ẹ̀rí Ohun-Ìmọ̀
- Copyrights belong to Edvard Glazebrook, 2020
- Àwọn Ọmọ Ẹgbẹ́
- Edvard Glazebrook
Oníṣọwọ́
Ṣàwárí Ju Designers.org Lọ
Ṣàwárí àwọn ọjà, iṣẹ́ àti àǹfààní láti ọ̀dọ̀ àwọn alábàáṣe ìpolówó wa.
Díẹ̀ Síi Láti Ṣàwárí
Àwọn Àpẹrẹ Tó Jọra
Ṣàwárí àwọn àpẹrẹ mìíràn tó gba àmì ẹ̀yẹ nínú ẹ̀ka kan náà, tí a yàn nípasẹ̀ ìyege.
