Edvard Glazebrook tomonidan yaratilgan Arch Stul, Suyanchiqsiz Stul — Mebel Dizayni tanlov toifasida nufuzli 2021 A' Design Award Bronza Mukofoti mukofotining yuqori baholangan g'olibidir.
BronzaMebel· 2021
Arch Stul, Suyanchiqsiz Stul
muallif: Edvard Glazebrook
Mebel toifasida A' Design Award Bronza Mukofoti g'olibi
Tasdiqlangan mukofot g'olibi
#106853 uchun mukofot holatini tasdiqlashDizayn
Arch Stul, Suyanchiqsiz Stul haqida
Arch — o'yilgan va qora bo'yalgan laminatsiyalangan qarag'ay yog'ochidan yasalgan stul va suyanchiqsiz o'rindiq. Dizayn oddiy va takrorlanuvchi shakllar va formalarga asoslangan bo'lib, bu mebelga bir jinsli va mantiqiy ifoda beradi. Beshta bir xil ravoq stulning oyoqlari va suyanchig'ini hosil qiladi, suyanchiqsiz o'rindiq esa markazda birlashuvchi uchta yarim ravoqdan yasalgan. Barcha qismlar CNC frezer yordamida laminatsiyalangan yog'och plitadan kesib olinadi, so'ngra yopishtiriladi va yog'och mixchalar bilan biriktiriladi. Egri chiziqlar mebelning eng zaif nuqtalarini mustahkamlaydi.
Tan olinish
A' Design Award Bronza Mukofoti haqida
Arch Stul, Suyanchiqsiz Stul A' Design Award Bronza Mukofotining g‘olibi bo‘lib, bu ijodkorlik, zukkolik va topqirlik bilan ajralib turuvchi a’lo dizaynlarga beriladigan o‘ta nufuzli e’tirofdir. Bronza g‘oliblari o‘z dizaynerlarining keng tajribasi, tasavvuri va topqirligini tasdiqlovchi juda mohir va hayratlanarli darajada ijodiy buyumlardir. Arch Stul, Suyanchiqsiz Stul yuqori qadrlanadigan, hayrat bilan qaraladigan va suyukli, diqqatga sazovor darajada kasbiy va innovatsion buyum bo‘lishi kutiladi. A' Design Award Bronza Mukofotini qo‘lga kiritgan ushbu dizayn san’at, fan, dizayn va texnologiyadagi eng yaxshi amaliyotlarni o‘zida mujassam etadi va tafsilotlarga e’tibori bilan a’lodir. Arch Stul, Suyanchiqsiz Stul ehtiyojlarni go‘zal qondiradi, istaklarga tegadi, tuyg‘ularni maftun etadi va qiziqishni jalb qiladi.
Dizayn ortida
Press-kit
Dizayner tomonidan taqdim etilgan kreditlar, jamoa a'zolari va texnik tafsilotlar.
- Noyob xususiyatlar
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- O'lchamlar va qadoqlash
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Teglar
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Ishlab chiqarish texnologiyasi
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Dizayn muammosi
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Tadqiqot
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Ilhom
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Loyiha muddati
- The project started in march 2020 - and finished in late May 2020.
- Ish jarayoni
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Patentlar
- Copyrights belong to Edvard Glazebrook, 2020
- Jamoa a'zolari
- Edvard Glazebrook
Homiylik
Designers.org dan tashqarini kashf eting
Reklama hamkorlarimizdan mahsulotlar, xizmatlar va imkoniyatlarni kashf eting.
Ko'proq kashf eting
Tegishli dizaynlar
Xuddi shu toifadan mukofotga sazovor bo'lgan boshqa dizaynlarni ko'ring, sifat bo'yicha tanlangan.
