Travis Baldwin tarafından tasarlanan Rx1 IOT Kontrol Ünitesi

Travis Baldwin tarafından tasarlanan Rx1 IOT Kontrol Ünitesi, Bilgi Teknolojileri Tasarımı Yarışma Kategorisinde son derece prestijli 2021 A' Design Award Demir Ödülü ödülünün saygın bir kazananıdır.

DemirBilgi Teknolojileri· 2021

Rx1 IOT Kontrol Ünitesi

tasarımcı: Travis Baldwin

Müşteri: Crea Inc Design Ltd.

Bilgi Teknolojileri Kategorisinde A' Design Award Demir Ödülü Kazananı

63,593

Doğrulanmış Ödül Kazananı

#123134 için Ödül Durumunu Doğrula

Siteyi Ziyaret Et A' Design Award'da Görüntüle Basın Bülteni Ödül Rozeti

Renkler

Tasarım

Rx1 IOT Kontrol Ünitesi Hakkında

Rx1, geçiş okuyucuları ile kilitleri birbirine bağlayan ve geçişe izin verilip verilmeyeceğine karar veren bir güvenlik kontrol ünitesidir. Ünite, bir elektrik panosunun içindeki DIN rayına monte edilir; bu nedenle formu sade tutulmuş ve bu bağlama uygun biçimde tasarlanmıştır. Baskılı grafikler hangi kablonun soketin hangi pinine bağlanacağını gösterir, LED'ler ise hangi sokette arıza olduğunu belirtir. Gövde duvara monte edildiğinde, iç bacalı boşluk ve yan havalandırma delikleri işlemciyi soğutur. LED kartları yüzeye yakın konumlandırılmıştır; böylece ışık iletim borularına gerek kalmaz. Kasa, aleve dayanıklı plastikten üretilmiştir.

Tanınırlık

A' Design Award Demir Ödülü Hakkında

Rx1 IOT Kontrol Ünitesi, A' Design Award Demir Ödülü kazananıdır; bu, iyi tasarlanmış yaratımlardan beklenen profesyonel ve endüstriyel gereklilikleri karşılayan iyi tasarımlara verilen prestijli bir tanınırlıktır. Demir kazananlar, yaratıcılarının büyük becerisini, yüksek uzmanlaşmasını, uzman kavrayışını ve yaratıcı kapasitesini gösterir. Rx1 IOT Kontrol Ünitesi, çok itibar gören, hayranlıkla izlenen ve sevilen, pratik ve yenilikçi bir yaratım olması beklenir. A' Design Award Demir Ödülü kazanan bu tasarım, sektörün en iyi uygulamalarını bütünleştirir ve bilgi birikimi ve yetenekle bağlantılı yetkin teknik özelliklere sahiptir. Rx1 IOT Kontrol Ünitesi titizliği nedeniyle saygı görür ve dünyayı daha iyi bir yer haline getirmeye yardımcı olan yaşam kalitesi iyileştirmeleri sunmak üzere tasarlanmıştır.

Tasarımın Perde Arkası

Basın Kiti

Tasarımcı tarafından sağlanan jenerik, ekip üyeleri ve teknik detaylar.

Benzersiz Özellikler: Aesthetics set Rx1 apart from other products in its category, but are appropriate for the context.
Embodies brand building design features that can be reused for other products (info/brand face, vents, & rounded form).
Atrium cooling strategy is optimized for cooling the processor in wall mounted orientation.
Innovative led mount strategy eliminates light pipes. Graphics allowing clusters of remote led.
Ease of use via graphics indicating what circuit has issues and easy din mount install.
Boyutlar ve Ambalaj: Overall size is 8.0 x 4.5 x 1.75in (203.5 x 114.8 x 44.5 mm). It is made from Flame resistant plastic and is optimized for UL safety. Rx1 controls two doors and two access devices, plus connectivity on Ethernet RJ45. System status is indicated by led for each plug and a status indicator relaying information. There is a hidden reset button and a tamper sensor indicating unauthorized access. Various DIN rail mounts can used and have been specified/ configured for ease of accessibility. Wiring is easy to using phoenix plugs. Powered by Rasberrry Pi cm4, it replaces the Hirsch Mx1.
Etiketler: Security, Controller, DIN, IOT, Badge Access, Door Locks, Access Control
Üretim Teknolojisi: The product is made up of custom built electronics and plastics, as well as off the shelf parts. The electronics schematic was started when ID started, consisting of a Raspberry Pi compute pcb and an I-O pcb. As we developed device architecture concepts and each was evaluated for easy of use, aesthetics, and performance. When a form was chosen, the design was developed from the outside-in, ie. We started with best form in respect to setup, mounting, servicing, and information architecture. The pcb layout architecture was driven by this, and is an example of design led engineering.
Tasarım Zorluğu: The hardest part was to create appropriate design for the context. DIN rail spaces in electronics closets are not visible and hide unsightly devices. Design styling that is dramatic or overdesigned would waste the mfg costs as it would not be seen and may turn customers away from company products. Perceived value of the product would be directly influenced by the design styling. It should appear a high quality performance product, based on solid engineering and not flash. Design challenges were cooling, access to DIN mounts, and fitting text on the top surface.
Araştırma: Primary and secondary research were employed for the Rx1 design. Two research objective were to create a good user experience build an appropriate design language for the category. Usability research came from the client, installers, and forums. Valuable info such as the reliance on flat head screwdriver installation and importance of diagnostic led. For styling, date came from competitive audits, style reference, and company brand. Learnings were that the vent area could be a brand feature, and the distinctive red color is important to represent.
İlham: Inspiration was tasteful design that stands out from competition, but is not overdesigned nor compromises ease of use - Rx1 is a highly functional product and lives in device closets among other utilitarian products.
Brief was to not "design a box" but have appropriate style for context. Also to build brand design language including prominently displayed brand graphics such as red circle motif.
Inspiring products were consumer routers and external hard drives, particularly with vents.
Proje Süresi: The project was started in November 2020, in both Bristol, UK and Santa Ana, California. The project was finished in March 2021, is in manufacturing now, and will be released in Spring 2021.
İşleyiş Akışı: Rx1 is a security controller linking access readers and locks, and making decisions on allowing access. The device is mounted in an electronics closet, only opened if there is an issue. During install, Rx1 is attached to a Din rail, among other devices. Inputs and outputs are wired using phoenix plugs (multiple wires fixed with screws, then plugged in). Printed text indicates what wire goes to which plug pin. During diagnostic, LEDs indicate which plug has a fault. To remove, the DIN mount is disengaged from the wall with either a flat head screwdriver or via depressing a spring release.
Ekip Üyeleri: Industrial Designer: Travis Baldwin
Program Manager: Mark Allen
Electrical Director: Bryan Gordon
Engineering Director: Christopher Karr
Görsel Kredileri: Image #1 : Industrial Designer Travis Baldwin, Overhead, 2021
Image #2 : Industrial Designer Travis Baldwin, See Through, 2021
Image #3 : Industrial Designer Travis Baldwin, In Context, 2021
Image #4 : Industrial Designer Travis Baldwin, Details, 2021
Image #5 : Industrial Designer Travis Baldwin, Exploded, 2021