Ang disenyo na Dond Mababang Mesa ni Jinyang Koo ay isang lubhang iginagalang na nagwagi ng napaka-prestihiyosong 2020 A' Design Award na Bronse sa Kategoryang Paligsahan na Disenyo ng Muwebles.

BronseMuwebles· 2020

Dond Mababang Mesa

ni Jinyang Koo

Kliyente: Wuui

Nagwagi ng A' Design Award na Bronse sa Kategoryang Muwebles

17,948

Na-verify na Nagwagi ng Parangal

I-verify ang Katayuan ng Parangal para sa #88288

Bisitahin ang Site Tingnan sa A' Design Award Press Release Badge ng Parangal

Mga Kulay

Ang Disenyo

Tungkol sa Dond Mababang Mesa

Ang disenyo ng salaysay ng Dond ay pagiging simple ngunit maraming nalalaman. Ang isang simpleng magkasanib na bahagi ay lumilikha gamit ang isang 3D printer, at minimal na disenyo ng mga bahagi upang ang isang consumer ay madaling tipunin ang talahanayan o dissembled upang magpatuloy sa panahon ng transportasyon. Ang layunin ng taga-disenyo ay para makasama si Dond sa pang-araw-araw na pangangailangan ng mamimili upang masiyahan sa isang mas madaling pamumuhay para sa anumang okasyon na panloob o panlabas. Gumagamit si Dond ng isang diretso na diskarte sa disenyo tulad ng tuktok na ibabaw na hindi nakakabit sa mga binti at madaling tinanggal upang magamit bilang isang tray.

Ang Pagkilala

Tungkol sa A' Design Award na Bronse

Ang Dond Mababang Mesa ay nagwagi ng A' Design Award na Bronse, isang lubhang prestihiyosong pagkilalang iginagawad sa mga natatanging disenyong nakikilala sa pagkamalikhain, katalinuhan at talas ng isip. Ang mga nagwagi ng Bronse ay mga likhang lubhang mahusay at kapansin-pansing malikhain na nagpapatunay sa malawak na karanasan, imahinasyon at pagkamaparaan ng kanilang mga tagapagdisenyo. Inaasahang ang Dond Mababang Mesa ay isang lubos na pinahahalagahan, hinahangaan at minamahal na bagay na kapansin-pansing propesyonal at makabago. Ang disenyong ito na nagwagi ng A' Design Award na Bronse ay nagsasama ng pinakamahuhusay na kasanayan sa sining, agham, disenyo at teknolohiya, at mahusay dahil sa pansin nito sa detalye. Ang Dond Mababang Mesa ay kahanga-hangang tumutugon sa mga pangangailangan, humahaplos sa mga hangarin, bumibighani sa damdamin at umaakit sa pag-uusisa.

Sa Likod ng Disenyo

Press Kit

Mga kredito, miyembro ng koponan at teknikal na detalye na ibinigay ng taga-disenyo.

Mga Natatanging Katangian: Dond is a small and yet versatile low table. In order to apply a simple assembly method, A joint part is designed so that it can be easily assembled. The joint parts is made by 3D printer. The results from our experiment shows that the intensity of Dond can be increased by using three joint parts or more.The board surface of Dond is not attached with the parts below, therefore, the board is a multipurpose tool for our daily life. Eg. Tray
Mga Sukat at Packaging: Top: 330mmx330mmx15mm
Overall Height: 415mm
Mga Tag: Low table, Table, Future technology, Japanese, Minimal, Joint, DIY, Portable
Teknolohiya sa Produksyon: The joint parts is made by 3D printing technology while the table top and bottom are hand made. Japanese Sugi (cedar wood) is used as the main material for the parts of Dond.
Hamon sa Disenyo: Although 3D printing technology and wooden crafting can be fused seamlessly, but we are not sure about the sustainability of the combination during our research process. However the issue has been solved by conducting different experiments like attempting on different measurements of the parts.
Pananaliksik: During the research stage, multiple test conducted to check against Dond's durability and sustainability ensuring the design maintain lightweight and versatile. Different 3D materials was use including thickness measure for the jointing during this stage to successfully pass the test. Several collisions occurred during this stage resulted the designer to have selected Resins as the main material for the jointing part for Dond. Multiple test combination of size, material, wood thickness and weight measure has allowed the designer to accomplished and present the final stage of Dond.
Inspirasyon: The design inspiration of Dond comes from the frustration of bringing a huge table out for picnic or any outdoor occasions. The designer wanted to design a low table that can be easily assembled and has a high space efficiency.
Tagal ng Proyekto: The project was started and finished on October 2017 in Osaka and exhibited at "Composition 2017".
Daloy ng Operasyon: Dond can be easily assembled by attaching the legs to the main pole via the joint parts while the table top can be placed on top of it. The amount of table legs can be increased for stability by just simply adding more joint parts to the pole, and the table top can be removed anytime for other purpose.

Dond is designed to be light and handy. It could be easily disassembled for transportation and assemble for usage in any occasions. The minimalism approach of Dond allows it to fit in any location.
Mga Miyembro ng Koponan: JINYANG KOO