Repose Silyang Pahingahan ni John G Williams

Ang disenyo na Repose Silyang Pahingahan ni John G Williams ay isang lubhang iginagalang na nagwagi ng napaka-prestihiyosong 2019 A' Design Award na Bakal sa Kategoryang Paligsahan na Disenyo ng Muwebles.

BakalMuwebles· 2019

Repose Silyang Pahingahan

ni John G Williams

Kliyente: John G Williams Fine Furniture

Nagwagi ng A' Design Award na Bakal sa Kategoryang Muwebles

14,013

Na-verify na Nagwagi ng Parangal

I-verify ang Katayuan ng Parangal para sa #75298

Bisitahin ang Site Tingnan sa A' Design Award Press Release Badge ng Parangal

Mga Kulay

Ang Disenyo

Tungkol sa Repose Silyang Pahingahan

Ang Repose ay isang silyang pahingahan na gawa mula sa matigas at solidong kahoy. Ang balangkas ay gawa sa American ash, at ang upuan at likuran naman ay American walnut. Ang malalim at kurbadong upuan ay nabuo sa pamamagitan ng paglalamina ng mga hinubog na piraso ng kahoy na may nakahilig na gilid, isang matinding bersyon ng metodong "coopering" na ginagamit sa paggawa ng mga bariles. Ang mga panloob na kurba ay pinakinis gamit ang custom na kagamitan, samantalang ang ibabaw ng mga braso ay nananatiling may hati-hating tekstura. Ang mga likurang binti ay hinubog gamit ang singaw at tumutulong upang patatagin ang mga braso. Ang mga "draw bore tenon joint" ay nagdaragdag ng lakas. Layunin nito na makamit ang ganda ng ginhawa ng isang inupholsteran na silya, gamit lamang ang solidong kahoy.

Ang Pagkilala

Tungkol sa A' Design Award na Bakal

Ang Repose Silyang Pahingahan ay nagwagi ng A' Design Award na Bakal, isang prestihiyosong pagkilalang iginagawad sa mga mahuhusay na disenyong tumutugon sa mga propesyonal at pang-industriyang kinakailangang inaasahan sa mga mahusay na pagkakadisenyong likha. Ang mga nagwagi ng Bakal ay nagpapakita ng dakilang husay, mataas na espesyalisasyon, dalubhasang pag-unawa at kakayahang malikhain ng kanilang mga lumikha. Inaasahang ang Repose Silyang Pahingahan ay isang lubos na pinahahalagahan, hinahangaan at minamahal na likhang praktikal at makabago. Ang disenyong ito na nagwagi ng A' Design Award na Bakal ay nagsasama ng pinakamahuhusay na kasanayan ng industriya at may mahuhusay na katangiang teknikal na may kasamang kaalaman at talento. Ang Repose Silyang Pahingahan ay iginagalang dahil sa kaingatan nito at idinisenyo upang maghatid ng mga pagpapabuti sa kalidad ng buhay na tumutulong gawing mas mabuting lugar ang mundo.

Sa Likod ng Disenyo

Press Kit

Mga kredito, miyembro ng koponan at teknikal na detalye na ibinigay ng taga-disenyo.

Mga Natatanging Katangian: The Repose lounge chair is constructed from solid timber. The curved form is realized by an extreme form of the 'coopering' process - similar to the process used to construct round barrels from staves of timber.
Mga Sukat at Packaging: W 800, D 800, H 830 mm
Constructed from solid hardwood timber. Frame: American Ash. Seat and Back: American Walnut.
Joints use draw bore tenon joints for extra strength
Mga Tag: Lounge, chair, wooden, artisanal, Danish, timber, art
Teknolohiya sa Produksyon: This chair is not moulded, as some might expect, but is formed from solid timber. The deep sweeping form of the seat is made by laminating various pieces of timber, with angled edges, to form the desired curves. The inside curves are machined into smooth curves with custom made tooling; but the arm uppers retain some of the segmented feel - smooth enough and yet conveying a sense of where the piece came from. The rear legs are steam bent, to retain the overall simplicity, and to attenuate and stabilize the top part of the chair arms. The backrest is also a curved laminated, solid-wood form. It would also be possible to add a thin seat cushion, or perhaps to re-conceive the entire backrest as a custom moulded leather cushion
Hamon sa Disenyo: The major unknown was how strong the seat section would be in bending - in other words if someone sat on the arms, would they break? It became apparent that the arms would need additional support given the depth of the form, and the inevitable flexibility (despite steps taken to add strength in the manufacturing process). It was found that the support pins at the rear of the arms were sufficient to stabilize the entire form - which was confirmed through trial and error.
Overall the challenge was to create a lounge chair that, despite being solid timber, would be as comfortable as an upholstered equivalent
Pananaliksik: The method drew heavily on the methods used in earlier designs (eg Zene submitted last year), but took these to extremes to experiment with the art of the possible.
New tooling was developed, in the form of a type of drum sander run between centres on a woodworking lathe, to machine the large concave curves
Inspirasyon: The inspirational question behind Repose was: if the design language at the core of the Beke and Zene dining ranges were extended to lounge furniture, what would that look like? Could a form be created out of beautiful solid hardwood timber that was profoundly comfortable even though it may be challenging to manufacture? Could some sort of modern shell design be crafted out of solid timber to yield a beautiful striking new design ?
Tagal ng Proyekto: The project was designed and the first prototype built in 4 weeks, starting Dec 2018 and completing in Jan 2019 in Johannesburg South Africa. The design was refined and built in finished materials (Ash and Walnut) over the following 4 weeks.
Daloy ng Operasyon: The user settles comfortably down into the seat using the armrests.
Various postures are supported sitting comfortably down in the seat.
Getting back out of the seat is very easy, and facilitated by the arms.
Mga Patent: UK IPO design registration: 6053688
Mga Miyembro ng Koponan: John G Williams
Mga Credit ng Larawan: All images: John G Williams