Morita Wds 2023 Booth ng Eksibisyon ni Shotaro Inahara

Ang disenyo na Morita Wds 2023 Booth ng Eksibisyon ni Shotaro Inahara ay isang lubhang iginagalang na nagwagi ng napaka-prestihiyosong 2025 A' Design Award na Pilak sa Kategoryang Paligsahan na Disenyo ng Arkitektura, Interyor at Eksibisyon ng Trade Show.

PilakTrade Show· 2025

Morita Wds 2023 Booth ng Eksibisyon

ni Shotaro Inahara

Kliyente: HAKUTEN Corporation

Nagwagi ng A' Design Award na Pilak sa Kategoryang Trade Show

20,489

Na-verify na Nagwagi ng Parangal

I-verify ang Katayuan ng Parangal para sa #162228

Bisitahin ang Site Tingnan sa A' Design Award Press Release Badge ng Parangal

Mga Kulay

Ang Disenyo

Tungkol sa Morita Wds 2023 Booth ng Eksibisyon

Ang Morita Wds 2023 ay isang booth ng eksibisyon na ginawa para sa isang tagagawa ng kagamitang pang-dental. Ang booth ay may sukat na 32000 x 15000 x 4500 milimetro. Ipinapakita ng disenyo ang pinagmulan at proseso ng mga produkto sa halip na ang mga produkto lamang. Ang mga bahagi ay binabaklas at ipinapakita, ang mga panloob na mekanismo ay makikita sa pamamagitan ng mga transparent na bintana, at ang mga sukat ay inilalantad upang ipaliwanag ang layunin ng disenyo. Ang mga panel ng dingding ay gawa mula sa mga tirang sheet metal na naiwan pagkatapos ng die cutting. Ang istruktura ay pinagdugtong gamit ang mga tornilyo nang walang pandikit, kaya maaaring i-recycle ang mga materyales.

Ang Pagkilala

Tungkol sa A' Design Award na Pilak

Ang Morita Wds 2023 Booth ng Eksibisyon ay nagwagi ng A' Design Award na Pilak, isang pambihirang prestihiyosong pagkilalang iginagawad sa mga disenyong nasa pinakamataas na antas, nakabibighani at kahanga-hanga. Ang mga nagwagi ng Pilak ay mga likhang lubhang makinang at napakamalikhain na naglalarawan sa pambihirang kadalubhasaan, talento at talas ng isip ng kanilang mga tagapagdisenyo. Inaasahang ang Morita Wds 2023 Booth ng Eksibisyon ay isang kahanga-hangang likhang huwaran na kapansin-pansing propesyonal at malalim na makabago. Ang disenyong ito na nagwagi ng A' Design Award na Pilak ay isang lubhang kapansin-pansin at hinahangaang imbensyon na nakikinabang at nagpapaunlad sa mga hangganan ng sining, agham, disenyo at teknolohiya. Ang Morita Wds 2023 Booth ng Eksibisyon ay isang likhang labis na kinaiinggitan na gumigising ng mga hangarin, nagdadala ng positibong damdamin at nagpapasiklab ng pagkamangha at pagkabighani.

Sa Likod ng Disenyo

Press Kit

Mga kredito, miyembro ng koponan at teknikal na detalye na ibinigay ng taga-disenyo.

Mga Natatanging Katangian: Began with a deep understanding of Morita by reading the technical history that describes how the products were made. The exhibition also included a tour of the manufacturing process and interviews about the company's commitment to its products. The exhibition also included a fascinating behind-the-scenes look at the products, including an introduction to the development story, a transparent and disassembled mechanism display, and an appeal to the design intent by exposing the dimensions.
Mga Sukat at Packaging: The overall dimensions of the booth are W32000 x D15000 x H4500 mm.
Mga Tag: Exhibition,Booth,Sustainability,Branding,Luminous Signs,Dental,Equipment
Teknolohiya sa Produksyon: The “MORITA MUSEUM” sign. The sign is side-illuminated, and one side is embedded in the wall to suggest that this is a booth that attracts visitors to Morita from a different angle.
The base design of the graphics is based on drawings, which gives visitors a sense of the product manufacturing process.
The wrighting of the corner signs is not based on product names, but on words that are beneficial to visitors, in order to induce their interest in the contents of the corner.
Hamon sa Disenyo: Based on the above, the booth will be a “fascinating display of the invisible” by (1) disassembling the product part by part, (2) introducing the development process and its secret story, (3) showing the internal mechanism through a transparent window, and (4) showing the design attention to detail through the dimensions of the product.
Pananaliksik: We also visited Morita Manufacturing Corporation, where the products are actually manufactured, to observe the manufacturing process and hear about the developer's commitment to the products.
Inspirasyon: Morita also exhibited at the annual regional dental shows. There, the company exhibits directly related to sales promotion, focusing on products and services, and it was a place to sell products. This year's WDS will focus not only on products, but also on their backgrounds. Who and what kind of thoughts and processes go into the making of a product. The experience was designed as a branding opportunity for people to learn more about Morita and become fans.
Tagal ng Proyekto: The project started in September 29, 2023 and finished in October 1, 2023 in Yokohama.
Daloy ng Operasyon: On the wall, we used a scrap piece of sheet metal from which parts had been die-cut.The design matched the concept of this exhibition as a material reminiscent of the manufacturing process, and the design also functioned as an eye-catcher, attracting visitors' interest by allowing them to see inside the booth through the hole in the wall.
The booth was fixed with screws, without using any adhesives, so that it could be returned to the factory and returned to the normal recycling flow.
Mga Miyembro ng Koponan: Designer : Shotaro Inahara
Art Director : Akiyuki Maruyama
Producer : Tatsuya Sato
Producer : Riku Nishihara
Product Manager : Toshiki Takei
Mga Credit ng Larawan: Image #No1~5 : Photographer, Akira Arai.