Horizontal Long Mesh Stand ng Bonfire ni Shigeru Yamada

Ang disenyo na Horizontal Long Mesh Stand ng Bonfire ni Shigeru Yamada ay isang lubhang iginagalang na nagwagi ng napaka-prestihiyosong 2024 A' Design Award na Pilak sa Kategoryang Paligsahan na Disenyo ng Kagamitang Panlabas at Pang-camping.

PilakKagamitang Pang-camping· 2024

Horizontal Long Mesh Stand ng Bonfire

ni Shigeru Yamada

Kliyente: Norinori Life

Nagwagi ng A' Design Award na Pilak sa Kategoryang Kagamitang Pang-camping

164,851

Na-verify na Nagwagi ng Parangal

I-verify ang Katayuan ng Parangal para sa #153103

Bisitahin ang Site Tingnan sa A' Design Award Press Release Badge ng Parangal

Mga Kulay

Ang Disenyo

Tungkol sa Horizontal Long Mesh Stand ng Bonfire

Habang ang mga bukas na apoy ay maaaring makasira sa damuhan at lupa, ang magaan at compact na produktong ito na may balangkas na stainless steel at konkabong balangkas ng mesh ay nagpapahintulot sa inyong mag-enjoy ng bonfire sa iba't ibang kapaligiran nang hindi kumakalat ang abo o mga alipato ng apoy sa paligid. Ang patented na istruktura sa Japan ay nagpapahintulot sa mga ningas na tumagos sa mesh sa gabi, upang mapanood ninyo ang dahan-dahang pagiging abo ng kahoy.

Ang Pagkilala

Tungkol sa A' Design Award na Pilak

Ang Horizontal Long Mesh Stand ng Bonfire ay nagwagi ng A' Design Award na Pilak, isang pambihirang prestihiyosong pagkilalang iginagawad sa mga disenyong nasa pinakamataas na antas, nakabibighani at kahanga-hanga. Ang mga nagwagi ng Pilak ay mga likhang lubhang makinang at napakamalikhain na naglalarawan sa pambihirang kadalubhasaan, talento at talas ng isip ng kanilang mga tagapagdisenyo. Inaasahang ang Horizontal Long Mesh Stand ng Bonfire ay isang kahanga-hangang likhang huwaran na kapansin-pansing propesyonal at malalim na makabago. Ang disenyong ito na nagwagi ng A' Design Award na Pilak ay isang lubhang kapansin-pansin at hinahangaang imbensyon na nakikinabang at nagpapaunlad sa mga hangganan ng sining, agham, disenyo at teknolohiya. Ang Horizontal Long Mesh Stand ng Bonfire ay isang likhang labis na kinaiinggitan na gumigising ng mga hangarin, nagdadala ng positibong damdamin at nagpapasiklab ng pagkamangha at pagkabighani.

Sa Likod ng Disenyo

Press Kit

Mga kredito, miyembro ng koponan at teknikal na detalye na ibinigay ng taga-disenyo.

Mga Natatanging Katangian: Most ordinary mesh-type fire pits have the mesh supported from below, but this product has a concave mesh structure that hooks onto the side frames, a structure that did not exist before and for which a patent was obtained (patent 7249692). This unique structure eliminates the weak point of conventional mesh-type fire pits, which are vulnerable to wind and difficult to cook with, while at the same time realizing the unique value of the beautiful flames shining through the mesh.
Mga Sukat at Packaging: Size:
W53cm×D18cm×H32cm(when assembled)
W50cm×D25cm×H5cm(when stored)
Material:
Main body, sidebars, legs: Stainless steel (SUS304)
Mesh sheet: Stainless steel (SUS304) ＊Dovetails are made of aluminum
Storage bag: cotton
Logo sticker: High-gloss paper (water-resistant)
Weight:1.8kg
Mga Tag: Outdoor, Camping, Bonfire
Teknolohiya sa Produksyon: Conventional mesh-type fire pits were used with the mesh spread out, but while they were lightweight and compact, they were vulnerable to wind and unsuitable for cooking. The mesh is then hooked onto a frame made of stainless steel (which can be assembled and put away in less than 30 seconds), creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash. The ironworker, who is a camper himself, developed this product under the direction of an outside designer to achieve both functionality and aesthetics.
Hamon sa Disenyo: The main focus of this product was to hold the woven stainless steel mesh in a U-shape with a frame, but it was also a portable product, so it needed to be compact and lightweight. Therefore, it was necessary to consider a variety of structures that could be easily assembled with a minimum of parts.
Pananaliksik: With the outdoor boom that began in the late 2010s, camping for a small group of one or two people has become especially popular, and a variety of outdoor gears have been sold. Among them, fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with. The new design has a stainless steel frame (which can be assembled and put away in less than 30 seconds) and a structure that hooks onto the mesh, creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash.
Inspirasyon: Fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with.
Tagal ng Proyekto: This product was launched in Japan on September 1, 2021
Daloy ng Operasyon: This fire pit was created by an ironworker who is also a camper. The stainless-steel mesh with high combustion efficiency is shaped in a concave that is less susceptible to wind. By using a trivet, a heavy Dutch oven can also be used. It is designed to allow the flames to be seen for its beauty and ease of cooking over an open fire where you can always see the heat level. Tough, minimal, and logical structure with an exquisite finishing. It is true craftsmanship quality that you will appreciate every time you use it.
Mga Patent: This product is patent pending (Patent Application 2023-011315, filed 1/27/2023) by Noridomi Ironworks Co.,LTD.
Mga Miyembro ng Koponan: Creator:Shigeru Yamada
Creative Derector:Takashi Sekimitsu
Assistant Director:Kenzo Noridomi
Mga Credit ng Larawan: Image #1: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #2: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #3: Director Kenzo Noridomi, Horizontal Long Mesh, 2023.
Image #4: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #5: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.