Ang disenyo na Airwood Drone Kit ni Uavi Technology ay isang lubhang iginagalang na nagwagi ng napaka-prestihiyosong 2020 A' Design Award na Bakal sa Kategoryang Paligsahan na Disenyo ng Laruan, Laro at Produktong Panlibangan.

BakalLaruan· 2020

Airwood Drone Kit

ni Uavi Technology

Kliyente: UAVI Technology (Shen Zhen) Limited

Nagwagi ng A' Design Award na Bakal sa Kategoryang Laruan

17,987

Na-verify na Nagwagi ng Parangal

I-verify ang Katayuan ng Parangal para sa #103852

Bisitahin ang Site Tingnan sa A' Design Award Press Release Badge ng Parangal

Mga Kulay

Ang Disenyo

Tungkol sa Airwood Drone Kit

Ang Airwood ay isang assembly drone kit na dinisenyo para sa mga bata at matatanda. Ang four-axis na drone na ito ay gumagamit ng frame na gawa sa composite basswood board, na pinutol sa manipis na dalawang milimetrong piraso gamit ang laser cutter. Sama-samang binubuo ng mga user ang mga wood board at electronic parts gamit ang kanilang kamay upang maitayo ang drone at ang remote control nito. Ang mga modular na controller, motor, at baterya ay nagbibigay-daan upang makalikha ng iba't ibang frame at hitsura mula sa iisang set. Sinusuportahan ng drone ang indoor hovering, aerial photography, at graphical programming. Binabawasan ng sertipikadong kahoy ang paggamit ng plastik at metal.

Ang Pagkilala

Tungkol sa A' Design Award na Bakal

Ang Airwood Drone Kit ay nagwagi ng A' Design Award na Bakal, isang prestihiyosong pagkilalang iginagawad sa mga mahuhusay na disenyong tumutugon sa mga propesyonal at pang-industriyang kinakailangang inaasahan sa mga mahusay na pagkakadisenyong likha. Ang mga nagwagi ng Bakal ay nagpapakita ng dakilang husay, mataas na espesyalisasyon, dalubhasang pag-unawa at kakayahang malikhain ng kanilang mga lumikha. Inaasahang ang Airwood Drone Kit ay isang lubos na pinahahalagahan, hinahangaan at minamahal na likhang praktikal at makabago. Ang disenyong ito na nagwagi ng A' Design Award na Bakal ay nagsasama ng pinakamahuhusay na kasanayan ng industriya at may mahuhusay na katangiang teknikal na may kasamang kaalaman at talento. Ang Airwood Drone Kit ay iginagalang dahil sa kaingatan nito at idinisenyo upang maghatid ng mga pagpapabuti sa kalidad ng buhay na tumutulong gawing mas mabuting lugar ang mundo.

Sa Likod ng Disenyo

Press Kit

Mga kredito, miyembro ng koponan at teknikal na detalye na ibinigay ng taga-disenyo.

Mga Natatanging Katangian: Airwood Wooden DIY Drone is a serials of four-axis drone with a wooden DIY structure as the frame. It uses modularity controllers, motors, batteries, remote controls and other modules to install drones with different structures.The drone has excellent performance and has the basic performance of the mid-end consumer-grade drone in the market, supporting indoor hovering, aerial photography, programming and other functions.
Mga Sukat at Packaging: Maximum Drone Dimensions: 185 to 250mm
Axle-base: 120 to 180mm
Drone Weight: 75 to 80g
Drone Battery: 800mah
Flight Time: 6 to 8mins
Flight Distance: 50m
Charging Time: 40mins
Propeller: 65mm ABS
RC Frequency: 2.402 to 2.480 GHz
RC Battery: 250mah
Camera: CMOS 3MP
Camera Resolution: 1280 X 720
Programming Platform: Arduino, Mixly
Packaging Dimensions: 203mmX203mmX58mm
Packaging Materials: Wood board and Printed paper
Mga Tag: Drone, Wood, DIY, Modularity, Programmable
Teknolohiya sa Produksyon: Different from traditional solid wood products, Airwood selects composite basswood board as the main materials. It has a high utilization rate for wood and a soft surface with silk luster. The board is cut by laser cutter. We only use the 2-mm thick board, so as to ensure the structural strength and make the laser-cut board have a good appearance. The wood boards have FSC and CARB certifications, which mean the whole process is highly environmental friendly.
Hamon sa Disenyo: How to use such a thin board to assemble a structurally stable drone is the first difficulty of Airwood design. We need to consider both the wood structural strength, the drone aerodynamics, the fun of the assembly and the appearance. And the diversity of drone frames also brings the new challenges for drone control. In order to have a stable and consistent experience on frames with different weight, inertia and dynamic performance, we need to develop AI algorithms for drone too.
Pananaliksik: Drones are often seen as cool and cold. When we found that the market needed a drone that was really for kids, we wanted to change that perception. Drone technologies have no secret, so we designed the assembly structure. Drones can be warm and friendly, so we chose light wood. Drones are very easy to operate, so we use modularity technology and AI algorithms. Drones can also be programmed by kids, so we equipped the drone with the graphical programming function. Thus was born Airwood.
Inspirasyon: No matter from the ancient wooden buildings with different characteristics, or to the modern wooden products of all kinds, each and every work, always can arouse the resonance and love of everyone. Through our products, we hope to reduce people's use and dependence on plastics and metals. Starting with the pieces of wood, we hope to awaken the craftsman spirit deep in everyone's heart. Starting with a small idea, we hope that innovation can be a habit for both children and adults.
Tagal ng Proyekto: Airwood project started in March 2017 in Shenzhen, China. The first MVP version is launched in September 2017. After testing on a small scale, the Airwood formal version is launched in June, 2018. In January 2019, Airwood advanced version with indoor hover and programming functions is launched. Till now, Airwood's model design, module, programming functions are still growing.
Daloy ng Operasyon: When get a package of Airwood, users will get a wood box. Inside that, they will get several wood boards and all the electronic parts. They need to assemble all that parts to build a drone, including the remote controller. They also only need to change the wood frame to change Airwood to another appearance. When they want to take aerial photo or try programming flight, just to put the corresponding module on the flight controller and connect.
Mga Patent: Patented. ZL201820224711.0. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826465.2. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826961.8. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826453.X. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826454.4. UAVI Technology (Shen Zhen) Limited. 2018. China
Mga Credit ng Larawan: Image #1: Creator Fang WEN, Ninja of Airwood, 2020.
Image #2: Creator Fang WEN, Remote Controller of Airwood, 2020.
Image #3: Creator Fang WEN, Collection of Airwood, 2020.
Image #4: Photographer Fang WEN, Cubee and Sohpon of Airwood, 2018.
Image #5: Illustrator Fang WEN, Airwood Customization, 2019.
Video Credits: Creator Fang WEN, Airwood Introduction, 2018.