ዲዛይን Continuous Plate House 2.0 ምምሕያሽ መንበሪ ቤት ብ Ryumei Fujik and Yukiko Sato ኣብ ናይ ውድድር ምድብ ንድፊ ውሽጣዊ ቦታን ምርኢትን ኣዝዩ ዝኸበረ ተሸላማይ ናይ 2020 ናይ ነሓስ ሽልማት A' Design Award እዩ።
ነሓስውሽጣዊ· 2020
Continuous Plate House 2.0 ምምሕያሽ መንበሪ ቤት
ብ Ryumei Fujik and Yukiko Sato
ዓሚል: F.a.d.s
ኣብ ምድብ ውሽጣዊ ተሸላማይ ናይ ነሓስ ሽልማት A' Design Award
ዝተረጋገጸ ተሸላማይ
ንቁጽሪ #92851 ሽልማት ኣረጋግጽእቲ ዲዛይን
ብዛዕባ Continuous Plate House 2.0 ምምሕያሽ መንበሪ ቤት
እዚ ቤት እዚ ድሕሪ 18 ዓመታት ካብ ዝተዛዘመሉ ብዋናነት ኣብ መጀመርታ ደርቢ ተመሓይሹ። እቲ ምምሕያሽ፡ እቲ ዝነበረ ቦታ ኩሽና - ኩሽና፡ ኾርነር ናይ ፍርያም መግቢ፡ ከምኡ'ውን መኽዘን መግቢ ዝሓቖፈ - ንዝተፈላለዩ ዓላማታት ክውዕል ዝኽእል ቦታ ክቕየር ጠለብ። ነዚ ጠለብ እዚ ንምምላስ፡ እቲ መኽዘን መግቢን መገድታትን ተወጊዶም፡ ምሉእ እቲ ቦታ ንሓደ ክፍሊ ስፍሓት ተገይሩ፡ ከምኡ'ውን እቲ ማህጸን ካብ ኣብ መናድቕ ዝተተኽለ ዓይነት ናብ ደሴት ዓይነት ተቐይሩ፡ ኣብ ኩሽና ዩኒት ዝተማህጸነ ዝያዳ ቦታ ክኸውን ተገይሩ። ብእንጨይቲ ማዕርነት ስለ ዝተሸፈነ፡ ከም ህዱእን ምቹእን ክፍሊ እንደገና ተወሊዱ።
እቲ ኣፍልጦ
ብዛዕባ ናይ ነሓስ ሽልማት A' Design Award
Continuous Plate House 2.0 ምምሕያሽ መንበሪ ቤት ናይ ነሓስ ሽልማት A' Design Award ዝዓወተ እዩ፣ ብፈጠራ፣ ርእሰ ሓይልን ስቕታን ዝፍለዩ ብልጫ ዘለዎም ዲዛይናት ዝወሃብ ኣዚዩ ክቡር ኣፍልጦ። ዘዓወቱ ነሓስ ሰፊሕ ተሞክሮ፣ ምሕሳብን ርእሰ ምምዕባልን ዲዛይነራቶም ዘረጋግጹ ኣዚዮም ክኢላታትን ብዘደንቕ መገዲ ፈጠራውያንን ኣርቴፋክትታት እዮም። Continuous Plate House 2.0 ምምሕያሽ መንበሪ ቤት ብዙሕ ዝተመነየ፣ ዝደነቐን ዝፈተዎን ብኣገዳሲ መገዲ ሞያውን ሓድሽን ኣቕሓ ክኾን ይጽበ። እዚ ዝዓወተ ዲዛይን ናይ ነሓስ ሽልማት A' Design Award ኣብ ጥበብ፣ ሳይንስ፣ ዲዛይንን ቴክኖሎጂን ዝበለጹ ልምድታት ዘጣምር፣ ንዝርዝር ብዝህቦ ኣቓልቦ ድማ ዝበለጸ እዩ። Continuous Plate House 2.0 ምምሕያሽ መንበሪ ቤት ድልየታት ብጽባቐ የማልእ፣ ንድሌታት ይትንክፍ፣ ንስምዒታት የማርኽን ሕቶ ድማ የሰሕብን።
ድሕሪ እቲ ዲዛይን
ናይ ፕረስ ኪት
ክረዲትታት፣ ኣባላት ጋንታን ቴክኒካዊ ዝርዝራትን ብዲዛይነር ዝቐረቡ።
- ፍሉያት ባህርያት
- The renovation required that the existing kitchen area, consisting of the kitchen, breakfast corner, and food storage, be changed to a space that can be used for various purposes, not just at breakfast. In order to respond to this demand, the food storage and corridors were eliminated, making the entire space one room wide, and the sink was changed from a wall-mounted type to an island type, making it a more space centered on the kitchen unit. It has been reborn as a calm and cozy family room.
- ዓቐንን ማዕሸግን
- The size of the Kitchen area is width:3.2m by hight:2.4m by depth:7m.
- መለለዪታት
- Residence Renovation, Kitchen, spruce CLT panel, Continuous Plate
- ናይ ምፍራይ ቴክኖሎጂ
- The Kitchen area is covered with spruce CLT panels (made in Austria).
- ናይ ዲዛይን ብድሆ
- How Break a Box-form Architecture: In the original project (Continuous Plate House 1.0), it began to think from a box form at first. Although the effective idea was not able to be found out easily, as a result of repeating whether there is any method of breaking that somehow, and trial and error, composition as if the floor, the wall, and the roof were connected continuously and bent and built one plate was obtained.
- ምርምር
- Response to a Heavy Snowfall: The principal focus of the original project (Continuous Plate House 1.0) was how we should design in response to a heavy snowfall. Since there are some examples of research that snow cannot lie easily due to the influence of a wind as for a flat roof if there is even no parapet, rather, we designed by adopting such a flat roof since 1999.
- ምንጪ ሓሳብ
- This house has been renovated mainly on the first floor because 18 years the completion. It is made by folding a plate, and a rectangular box made of concrete is inserted into it to support the whole. The outer surface of the box is finished with concrete cast in cedar board formwork, leaving the texture of wood even though it is concrete. In order to further strengthen the design concept at the completion, the entire inside of the box, that is, the kitchen area is covered with a wooden finish.
- ናይ ፕሮጀክት ግዜ
- This house was first built in March 2001, and the renovation was completed in August 2019 in Fukui-city, Fukui Pref. in Japan.
- ኣባላት ጋንታ
- Ryumei Fujiki
Yukiko Sato - ናይ ስእሊ ክረዲት
- Image #1: Photographer Hiroshi Ueda
Image #2: Photographer Takeshi Taira
Image #3: Photographer Hiroshi Ueda
Image #4: Photographer Hiroshi Ueda
Image #5: Photographer Takeshi Taira
ስፖንሰር ዝተገብረ
ልዕሊ Designers.org ዳህሰስ
ካብ ናይ ማስታወቂያ መሻርኽትና ፍርያት፣ ኣገልግሎታትን ዕድላትን ፍለጥ።
ተወሳኺ ንምርካብ
ተዛመድቲ ዲዛይናት
ካብ ተመሳሳሊ ምድብ ብብቕዓት ዝተመረጹ ተወሳኺ ሽልማት ዝተዓወቱ ዲዛይናት ድለዩ።
