ዲዛይን Dond ትሑት ጣውላ ብ Jinyang Koo ኣብ ናይ ውድድር ምድብ ንድፊ ኣቕሑ ኣዝዩ ዝኸበረ ተሸላማይ ናይ 2020 ናይ ነሓስ ሽልማት A' Design Award እዩ።
ነሓስኣቕሑ· 2020
Dond ትሑት ጣውላ
ዓሚል: Wuui
ኣብ ምድብ ኣቕሑ ተሸላማይ ናይ ነሓስ ሽልማት A' Design Award
ዝተረጋገጸ ተሸላማይ
ንቁጽሪ #88288 ሽልማት ኣረጋግጽእቲ ዲዛይን
ብዛዕባ Dond ትሑት ጣውላ
እቲ ናይ ዶንድ ዲዛይን ትረኻ ቀሊል እንተኾነ ግና ተለዋዋጢ እዩ። ቀሊል መራኸቢ ክፋላት ብ3D ማሕተሚ ዝፍጠር እዩ፣ ከምኡ'ውን ተጠቃሚ ነታ ጣውላ ብቐሊሉ ክእክባ ወይ ድማ ኣብ ግዜ ምጉዓዝ ንምጉዓዝ ክፈትሓ ንዝኽእል ውሑድ ክፋላት ዲዛይን እዩ። ዓላማ እቲ ዲዛይነር፡ ዶንድ ኣብ መዓልታዊ ድሌታት ተጠቃሚ ተሳቲፉ ኣብ ዝኾነ እዋን ኣብ ውሽጢ ገዛ ወይ ደገ ገዛ ቀሊል ኣነባብራ ህይወት ክህልዎም እዩ ነይሩ። ዶንድ ቀጥታዊ ዲዛይን ኣገባብ የተግብር እዩ፣ ከም ምሳሌ እታ ላዕለዋይ ገጽ ምስ እግርታት ዘይትተኣሳሰር እያ ከምኡ'ውን ከም ጣሕሲት ንምጥቃም ብቐሊሉ ክትርሐቕ ትኽእል።
እቲ ኣፍልጦ
ብዛዕባ ናይ ነሓስ ሽልማት A' Design Award
Dond ትሑት ጣውላ ናይ ነሓስ ሽልማት A' Design Award ዝዓወተ እዩ፣ ብፈጠራ፣ ርእሰ ሓይልን ስቕታን ዝፍለዩ ብልጫ ዘለዎም ዲዛይናት ዝወሃብ ኣዚዩ ክቡር ኣፍልጦ። ዘዓወቱ ነሓስ ሰፊሕ ተሞክሮ፣ ምሕሳብን ርእሰ ምምዕባልን ዲዛይነራቶም ዘረጋግጹ ኣዚዮም ክኢላታትን ብዘደንቕ መገዲ ፈጠራውያንን ኣርቴፋክትታት እዮም። Dond ትሑት ጣውላ ብዙሕ ዝተመነየ፣ ዝደነቐን ዝፈተዎን ብኣገዳሲ መገዲ ሞያውን ሓድሽን ኣቕሓ ክኾን ይጽበ። እዚ ዝዓወተ ዲዛይን ናይ ነሓስ ሽልማት A' Design Award ኣብ ጥበብ፣ ሳይንስ፣ ዲዛይንን ቴክኖሎጂን ዝበለጹ ልምድታት ዘጣምር፣ ንዝርዝር ብዝህቦ ኣቓልቦ ድማ ዝበለጸ እዩ። Dond ትሑት ጣውላ ድልየታት ብጽባቐ የማልእ፣ ንድሌታት ይትንክፍ፣ ንስምዒታት የማርኽን ሕቶ ድማ የሰሕብን።
ድሕሪ እቲ ዲዛይን
ናይ ፕረስ ኪት
ክረዲትታት፣ ኣባላት ጋንታን ቴክኒካዊ ዝርዝራትን ብዲዛይነር ዝቐረቡ።
- ፍሉያት ባህርያት
- Dond is a small and yet versatile low table. In order to apply a simple assembly method, A joint part is designed so that it can be easily assembled. The joint parts is made by 3D printer. The results from our experiment shows that the intensity of Dond can be increased by using three joint parts or more.The board surface of Dond is not attached with the parts below, therefore, the board is a multipurpose tool for our daily life. Eg. Tray
- ዓቐንን ማዕሸግን
- Top: 330mmx330mmx15mm
Overall Height: 415mm - መለለዪታት
- Low table, Table, Future technology, Japanese, Minimal, Joint, DIY, Portable
- ናይ ምፍራይ ቴክኖሎጂ
- The joint parts is made by 3D printing technology while the table top and bottom are hand made. Japanese Sugi (cedar wood) is used as the main material for the parts of Dond.
- ናይ ዲዛይን ብድሆ
- Although 3D printing technology and wooden crafting can be fused seamlessly, but we are not sure about the sustainability of the combination during our research process. However the issue has been solved by conducting different experiments like attempting on different measurements of the parts.
- ምርምር
- During the research stage, multiple test conducted to check against Dond's durability and sustainability ensuring the design maintain lightweight and versatile. Different 3D materials was use including thickness measure for the jointing during this stage to successfully pass the test. Several collisions occurred during this stage resulted the designer to have selected Resins as the main material for the jointing part for Dond. Multiple test combination of size, material, wood thickness and weight measure has allowed the designer to accomplished and present the final stage of Dond.
- ምንጪ ሓሳብ
- The design inspiration of Dond comes from the frustration of bringing a huge table out for picnic or any outdoor occasions. The designer wanted to design a low table that can be easily assembled and has a high space efficiency.
- ናይ ፕሮጀክት ግዜ
- The project was started and finished on October 2017 in Osaka and exhibited at "Composition 2017".
- ናይ ስርሒት ፍሰት
- Dond can be easily assembled by attaching the legs to the main pole via the joint parts while the table top can be placed on top of it. The amount of table legs can be increased for stability by just simply adding more joint parts to the pole, and the table top can be removed anytime for other purpose.
Dond is designed to be light and handy. It could be easily disassembled for transportation and assemble for usage in any occasions. The minimalism approach of Dond allows it to fit in any location. - ኣባላት ጋንታ
- JINYANG KOO
ስፖንሰር ዝተገብረ
ልዕሊ Designers.org ዳህሰስ
ካብ ናይ ማስታወቂያ መሻርኽትና ፍርያት፣ ኣገልግሎታትን ዕድላትን ፍለጥ።
ተወሳኺ ንምርካብ
ተዛመድቲ ዲዛይናት
ካብ ተመሳሳሊ ምድብ ብብቕዓት ዝተመረጹ ተወሳኺ ሽልማት ዝተዓወቱ ዲዛይናት ድለዩ።
