ዲዛይን Rebloom ሞዱላራዊ ደጋዊ ፍሬም ብ Victor Wu ኣብ ናይ ውድድር ምድብ ዘላቒ ፍርያት፣ ፕሮጀክትታትን ቀጠልያ ንድፊን ኣዝዩ ዝኸበረ ተሸላማይ ናይ 2023 ናይ ሓጺን ሽልማት A' Design Award እዩ።

ሓጺንዘላቒ ፍርያት· 2023

Rebloom ሞዱላራዊ ደጋዊ ፍሬም

ብ Victor Wu

ዓሚል: Leafer Circular Design

ኣብ ምድብ ዘላቒ ፍርያት ተሸላማይ ናይ ሓጺን ሽልማት A' Design Award

19,850

ዝተረጋገጸ ተሸላማይ

ንቁጽሪ #143099 ሽልማት ኣረጋግጽ

ሳይት ብጻሕ ኣብ A' Design Award ርአዮ ጋዜጣዊ መግለጺ ባጅ ሽልማት

ሕብርታት

እቲ ዲዛይን

ብዛዕባ Rebloom ሞዱላራዊ ደጋዊ ፍሬም

ናይ ታይዋን ናይ ሓይሊ ኤለክትሪክ ምዝርጋሕ ኣካላት ክቡር ዋጋ ዘለዎምን ብሰንኪ ረቛሒታት ሃዋህው ተደጋጋሚ ምትካእ ዘድልዮምን እዮም። ሪብሉም ነዚ ብምፍታሕ፡ ካብ ኣገልግሎት ዝተሰጐጉ ክራስኣርም ብውሑድ መስርሕ ናብ ዘላቂ ደጋዊ ፍሬማት ዳግማይ የዋህቦም። እቲ ሞዱላራዊ ዲዛይን ቀሊል ምትዕጻጻፍ፡ ምስፍሕፋሕን ምትካእ ክፋላትን ይፈቕድ፡ እዚ ድማ ቅድሚ ዳግመ-ምጥቃም ዝለዓለ ዕድመ ኣካላት የውጽእ። ብሪብሉም፡ ብኽነት ክትቅንሱን ወጻኢታት ክትቑጥቡን ከም ዘኽእልኩም ዘተኣማምንን ንኹነታት ኣየር ተቓዋማይ ዝኾነን ትሕተ-ቅርጺ ርጉጽ ክትገብሩ ትኽእሉ።

እቲ ኣፍልጦ

ብዛዕባ ናይ ሓጺን ሽልማት A' Design Award

Rebloom ሞዱላራዊ ደጋዊ ፍሬም ናይ ሓጺን ሽልማት A' Design Award ዝዓወተ እዩ፣ ካብ ጽቡቕ ዝተዳለዉ ፍጥረታት ዝጽበዩ ሞያውን ኢንዱስትሪኣውን ጠለባት ንዝመላኡ ጽቡቓት ዲዛይናት ዝወሃብ ክቡር ኣፍልጦ። ዘዓወቱ ሓጺን ዓቢ ክእለት፣ ልዑል ፍሉይነት፣ ክኢላዊ ርድኢትን ፈጠራዊ ዓቕምን ፈጣርዮም የርእዩ። Rebloom ሞዱላራዊ ደጋዊ ፍሬም ብብዙሕ ዝተመነየ፣ ዝደነቐን ዝፈተዎን፣ ተግባራውን ሓድሽን ፍጥረት ክኾን ይጽበ። እዚ ዝዓወተ ዲዛይን ናይ ሓጺን ሽልማት A' Design Award ንዝበለጹ ልምድታት ኢንዱስትሪ የጣምር፣ ምስ ፍልጠትን ተውህቦን ዝተኣሳሰሩ ብቑዓት ቴክኒካውያን ባህርያት ድማ ኣለዎ። Rebloom ሞዱላራዊ ደጋዊ ፍሬም ብጥንቃቐኡ ይኽበር፣ ንዓለም ዝሓሸ ቦታ ክትኸውን ዝሕግዙ ምምሕያሻት መዓርግ ህይወት ንምቕራብ ድማ ዝተዳለወ እዩ።

ድሕሪ እቲ ዲዛይን

ናይ ፕረስ ኪት

ክረዲትታት፣ ኣባላት ጋንታን ቴክኒካዊ ዝርዝራትን ብዲዛይነር ዝቐረቡ።

ፍሉያት ባህርያት: Due to humidity, typhoons, and earthquakes, Taiwan's power distribution relies on costly crossarm components regularly exchanged every decade.
reBloom extends the lifecycle of these decommissioned components by transforming them into sturdy and weather resistant outdoor frames, with little processing or additional parts. reBloom's modular design also means it is highly adaptable, extendable, and allows for easy part replacement - all of which further maximize component life before recycling.
ዓቐንን ማዕሸግን: The inherent dimensions and features of the decommissioned utility crossarm components were integrated to reduce additional processing and material consumption.
Specs of the original crossarm components used in a reBloom set (mm): (a) 2.5 crossarms, hollow square beam 1800 x 750 x 750 (THK 2.5), (b) 8 crossarm braces, 800 x 400 (THK 6), and (c) 12 sets of square nuts and square head bolts, 25 x 25 x 100.
Dimensions of a reBloom section (mm): 825.5 (each section adds 737.5) x 1223.5 x 800 x 75mm.
መለለዪታት: circular economy, modular, decommissioned materials, joinery, fence, outdoor, frame, galvanized steel, product life, material lifespan
ናይ ምፍራይ ቴክኖሎጂ: The crossarm components that reBloom utilizes are made from hollow, hot-dip galvanized steel beams, and have standardized dimensions and holes (punched via mass-production CNC machines). Little further processing is required to produce a reBloom set beyond some welding, bolt shortening, and assembly - especially when the reBloom design is incorporated during initial crossarm production (adding a few new holes). The standardized and modular design means it is easy to combine the decommissioned components into new forms, such as a fence, furniture structure, etc.
ናይ ዲዛይን ብድሆ: The hardest design challenge overcome in reBloom was the integration of the square head bolts.
Small and uncommon, it would be wasteful to create a single-use tool for their tightening. The final design includes a simple 'n'-shaped piece that doubles to help users with the last few twists as well as to lock the structure. Additionally challenging was calculating the position of the crossarms' original holes such that the crossarm braces can be evenly spaced and require the least processing.
ምርምር: We sought to design a second life for utility crossarm components, which are regularly decommissioned decades before degradation due to regulations.
Consulted factories told us that the material doesn't easily bend and that welding nullifies its weather resistance. We observed that mass production also required modularization and using existing specs. After brainstorming, we tested different joinery methods. The final design was praised by the utility company and showcased in several exhibits.
ምንጪ ሓሳብ: While on a visit to a utility company's waste stockpiles, we were struck by the prevalence of square head bolts, which are rarely seen in daily life. We wondered if making the format more accessible would give these discarded parts a chance to be reborn. This led us to create reBloom, a modular and adaptable design that extends the lifespan of various decommissioned components. Within reBloom, an ‘n’-shaped piece was designed to be both a wrench for the square head bolts and play an integral part of the final structure.
ናይ ፕሮጀክት ግዜ: The project started in September 2020 and finished in January 2021 in Tainan, Taiwan. Afterwards, a physical exhibition and presentation was held in Taipei in May 2021 and Kaohsiung in March 2022.
ናይ ስርሒት ፍሰት: Due to the rarity of square head bolts nowadays, most people would lack the tools needed to install reBloom. This issue was solved with the inclusion of an 'n'-shaped piece that functions as an easily-held wrench during installation, and lastly integrates into the final structure as a lock between each reBloom frame segment. This design makes it easy for any person to build reBloom.
ፓተንታት: Copyrights belong to Victor Wu, 2020.
ናይ ስእሊ ክረዲት: Image #1: Craig Bossley, Scenario, 2021.
Image #2: Victor Wu, Prototyping, 2020.
Image #3: Craig Bossley, Joint Closeup, 2021.
Image #4: Willy Chao, Setup, 2021.
Image #5: Victor Wu, Scenario Closeup, 2021.