ዲዛይን Obj01 ናይ ጣውላ መብራህቲ ብ Manu Bano ኣብ ናይ ውድድር ምድብ ንድፊ ፍርያትን መቐመጢታትን መብራህቲ ኣዝዩ ዝኸበረ ተሸላማይ ናይ 2021 ናይ ወርቂ ሽልማት A' Design Award እዩ።

ወርቂመብራህቲ· 2021

Obj01 ናይ ጣውላ መብራህቲ

ብ Manu Bano

ዓሚል: Manu BaÑÓ

ኣብ ምድብ መብራህቲ ተሸላማይ ናይ ወርቂ ሽልማት A' Design Award

61,960

ዝተረጋገጸ ተሸላማይ

ንቁጽሪ #119451 ሽልማት ኣረጋግጽ

ሳይት ብጻሕ ኣብ A' Design Award ርአዮ ጋዜጣዊ መግለጺ ባጅ ሽልማት

ሕብርታት

እቲ ዲዛይን

ብዛዕባ Obj01 ናይ ጣውላ መብራህቲ

Obj01 ካብ ሓንቲ ንጣብ ጥረ ሓጺን ዝተሰርሐ ናይ ጣውላ መብራህቲ ኮይኑ፡ እቲ ሓጺን ስቲል፡ ዘይምርኩስ ስቲል (ስቴንለስ ስቲል) ወይ ብራስ ክኸውን ይኽእል። እታ ንጣብ ብሌዘር ተቖሪጻ፡ ብዘይ ዝተጠበቐ መላግቦታት ብጎማ መዶሻ ብኢድ ትገጣጠም። ቀለልቲ ጂኦመትሪያዊ ቅርጽታት ነቲ መብራህቲ ይፈጥሩ፦ ርቡዕ ኩርናዕ፡ ክቢን ነቲ ናይ LED ምንጪ ብርሃን ዝሕዝ ሲሊንደርን። እቲ ክቢ ምስ ተቖርጸ፡ መጋረጃ ብርሃን ይኸውን። እቲ ገጽ ሓጺን ብኢድ ተወልዊሉ ብስምዒ ይዕሸግ። ዝተዋህሃደ ናይ ምትንካፍ ዲመር ነቲ ኤለክትሪክ ዘሕልፍ ኣካል ስለ ዝጥቀም፡ ዝኾነ ወገን ምትንካፍ ነቲ ብርሃን የብርህን የጥፍእን፡ ደረጃ ብርሃን ድማ የስተኻኽል። እቲ መብራህቲ 38 x 22 x 7 ሴ.ሜ. ዓቐን ኣለዎ።

እቲ ኣፍልጦ

ብዛዕባ ናይ ወርቂ ሽልማት A' Design Award

Obj01 ናይ ጣውላ መብራህቲ ናይ ወርቂ ሽልማት A' Design Award ዝዓወተ እዩ፣ ንቀዳምነት ደረጃ ዘለዎም፣ ዘገርሙን ዝተፈልዩን ዲዛይናት ዝወሃብ ኣዚዩ ክቡር ኣፍልጦ። ዘዓወቱ ወርቂ ጥበብን ፍልጠትን ክእለትን ዲዛይነራቶም ዘንጸባርቑ ኣዚዮም ሓደሽቲ፣ ርእይቶ ዘለዎምን ዘንጸባርቑን ፍጥረታት እዮም። Obj01 ናይ ጣውላ መብራህቲ ዘይተራእየ ዋጋ ዘምጽእ ኣዚዩ ዝተሞገሰ፣ ዝንባሌ ዘቐምጥን ሓውሲ ዝመስልን ፈጠራ ክኾን ይጽበ። እዚ ዝዓወተ ዲዛይን ናይ ወርቂ ሽልማት A' Design Award ደረት ጥበብ፣ ሳይንስ፣ ዲዛይንን ቴክኖሎጂን ብብዙሕ ጥቕሚ ዘስፍሕ ዘደንቕ ዝኽበር ፕሮጀክት እዩ። Obj01 ናይ ጣውላ መብራህቲ ሓያል ድሌት ዘሕድር፣ ተሃዋሕዋሕ ዘበራብር፣ ፈጠራ ዘተባብዕን ንዓና ዘማርኽን እዩ።

ድሕሪ እቲ ዲዛይን

ናይ ፕረስ ኪት

ክረዲትታት፣ ኣባላት ጋንታን ቴክኒካዊ ዝርዝራትን ብዲዛይነር ዝቐረቡ።

ፍሉያት ባህርያት: OBJ-01 is an understandable simple gesture. At a glance, it reveals its material, its manufacturing process, its function and its use. A plate of raw metal cut by laser and assembled by hand with a rubber hammer. Its size responds to the modulation and format of the material in its commercial standards. Pure geometric figures build the lighting fixture; a rectangle, a circle and a cylinder at the back which contains the LED light spot. The circle, when cut out, adopts the function of a screen.
ዓቐንን ማዕሸግን: Dimensions: 38 x 22 x 7 cm
Materials: Steel, Stainless steel or Brass + LED light + custom electronics.
ናይ ምፍራይ ቴክኖሎጂ: OBJ-01 is made out of sheet of raw metal, that can be steel, stainless steel or brass, cut by laser and assembled by hand with a rubber hammer and no welding joinery. Its size responds to the modulation and format of the material in its commercial standards. It is polished by hand and sealed with wax.
ናይ ዲዛይን ብድሆ: As a product designed and produced during 2020, the biggest challenge was to do everything from home. I am used to working with my hands and visiting many workshops. In this case I had to work with processes and materials I already knew because experimenting became impossible. Eventually I bought some machines to be able to bring the production to my home and to be able to control the quality by myself.
ምርምር: On this occasion, there was practically no research, the design process was an exercise of intuition. I decided to reuse the cardboard from online purchases I made during the pandemic and use it as material for mockups. I started working with this cardboard and a knife cutter making different cuts and folds to the cardboard to transform a 2D sheet into a 3D object with different uses. My intention from the beginning was to achieve a small object that I could send flat packed all over the world, so starting the process from a flat sheet was important.
ምንጪ ሓሳብ: In my day to day life I visit many workshops. In this occasion, as I could not go out to be inspired due to the pandemic, the challenge was to face a blank sheet of paper. I started with complex designs that I gradually discarded due to the impossibility of going to the production workshops. I ended up stripping away the complexity of the design and keeping the essentials. I decided to work just with one material and one industrial process which I was familiar with; metal and laser cutting.
ናይ ፕሮጀክት ግዜ: I designed the first OBJ-01 prototype during the pandemic in Mexico City in 2020 and I have been producing new pieces since then.
ናይ ስርሒት ፍሰት: OBJ-01 has an integrated custom touch dimmer. As metal is conductive, this system takes advantage of its properties, so when you touch the lamp in any side it turns on/off. The user can also control the LED brightness by tapping the lamp several times. This makes makes for me the object to look more sculptural as you don't need a black metal box with a dimmer close to the lamp to be able to turn it on, it's just the lamp over your sideboard.