Muundo Arch Kiti, Kiti Kisicho na Mgongo na Edvard Glazebrook ni mshindi mashuhuri wa tuzo ya kifahari ya 2021 Tuzo ya Shaba ya A' Design Award katika Kategoria ya Mashindano ya Usanifu wa Samani.
ShabaSamani· 2021
Arch Kiti, Kiti Kisicho na Mgongo
Mshindi wa Tuzo ya Shaba ya A' Design Award katika Kategoria ya Samani
Mshindi wa Tuzo Aliyethibitishwa
Thibitisha Hali ya Tuzo kwa #106853Muundo
Kuhusu Arch Kiti, Kiti Kisicho na Mgongo
Arch ni kiti na kiti kisicho na mgongo kilichotengenezwa kwa mbao za mierezi (pine) zilizochongwa, zilizowekwa tabaka na kutiwa rangi nyeusi. Muundo huu unategemea maumbo rahisi na yanayojirudia, ambayo yanaipa fanicha hii mwonekano wenye mfanano na mpangilio wa kimantiki. Matao matano yanayofanana yanaunda miguu na mgongo wa kiti, huku kiti kisicho na mgongo kikitengenezwa kwa nusu matao matatu yanayokutana katikati. Sehemu zote zimekatwa kutoka kwenye bamba la mbao lililowekwa tabaka kwa kutumia mashine ya CNC router, kisha zikaunganishwa kwa gundi na vigingi vya mbao. Miundo ya matao hii inaimarisha fanicha katika sehemu zake dhaifu zaidi.
Utambuzi
Kuhusu Tuzo ya Shaba ya A' Design Award
Arch Kiti, Kiti Kisicho na Mgongo ni mshindi wa Tuzo ya Shaba ya A' Design Award, utambuzi wenye heshima kubwa unaotolewa kwa miundo bora inayotofautishwa kwa ubunifu, ustadi na busara. Washindi wa Shaba ni kazi za ufundi mwingi na bunifu ya kushangaza zinazothibitisha uzoefu mpana, mawazo na ustadi wa wabunifu wao. Arch Kiti, Kiti Kisicho na Mgongo inatarajiwa kuwa kitu kinachothaminiwa sana, kupendwa na kuenziwa, ambacho ni cha kitaalamu na bunifu kwa kiasi kikubwa. Muundo huu ulioshinda Tuzo ya Shaba ya A' Design Award unajumuisha mbinu bora katika sanaa, sayansi, usanifu na teknolojia, na ni bora kwa umakini wake kwa undani. Arch Kiti, Kiti Kisicho na Mgongo hutosheleza mahitaji kwa uzuri, hugusa hamu, huvutia hisia na kuvutia udadisi.
Nyuma ya Muundo
Vifaa vya Habari
Mikopo, wanachama wa timu na maelezo ya kiufundi yaliyotolewa na mbuni.
- Sifa za Kipekee
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Vipimo na Ufungashaji
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Lebo
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Teknolojia ya Uzalishaji
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Changamoto ya Ubunifu
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Utafiti
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Msukumo
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Muda wa Mradi
- The project started in march 2020 - and finished in late May 2020.
- Mtiririko wa Uendeshaji
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Hataza
- Copyrights belong to Edvard Glazebrook, 2020
- Wanatimu
- Edvard Glazebrook
Imedhaminiwa
Gundua Zaidi ya Designers.org
Gundua bidhaa, huduma na fursa kutoka kwa washirika wetu wa matangazo.
Zaidi ya Kuchunguza
Miundo Inayohusiana
Chunguza miundo zaidi iliyoshinda tuzo kutoka kategoria hiyo hiyo, iliyochaguliwa kwa ubora.
