Luf Baki Bibit ku Industrial Design College of LAFA

Karya Luf Baki Bibit ku Industrial Design College of LAFA nyaéta pamenang anu dihormat pisan tina 2023 A' Design Award Beusi anu bergengsi dina Katégori Kompetisi Produk Lestari.

BeusiProduk Lestari· 2023

Luf Baki Bibit

ku Industrial Design College of LAFA

Klién: LuXun Academy of Fine Arts

Pamenang A' Design Award Beusi dina Katégori Produk Lestari

24,662

Pamenang Panghargaan anu Diverifikasi

Verifikasi Status Panghargaan pikeun #148786

Tingali di A' Design Award Siaran Pers Lencana Panghargaan

Warna

Désain

Ngeunaan Luf Baki Bibit

Luf mangrupa baki bibit anu dijieun tina serat loofah. Luf ngagentos baki plastik ku bahan biodegradable anu diwangun tina loofah anu diremukkeun, perekat berbasis bio, sareng bahan pangeras, anu dipanaskeun sareng dipencet dina cithakan. Baki-baki ieu tiasa disusun tumpuk, ku kituna hiji jalma tiasa mawa langkung ti lima baki dina hiji waktos. Unggal baki dibagi jadi tilu bagian anu mandiri sareng tiasa dipotong nuturkeun garis anu geus ditandaan. Sanggeus bibitna gede, bakina ditanem kana taneuh, dimana bakina bakal ancur jadi zat gizi. Siki loofah tiasa dikumpulkeun sareng dianggo pikeun budidaya salajengna.

Pangakuan

Ngeunaan A' Design Award Beusi

Luf Baki Bibit mangrupa juara A' Design Award Beusi, pangakuan anu bergengsi anu dipasihkeun ka desain alus anu minuhan sarat profésional jeung industri anu diharepkeun tina kréasi anu dirarancang alus. Para juara Beusi nunjukkeun kaahlian anu hébat, spésialisasi anu luhur, pamahaman ahli jeung kamampuh kréatif para kréatorna. Luf Baki Bibit diharepkeun jadi kréasi anu dihargaan, dikagumi jeung dipikanyaah anu praktis jeung inovatif. Desain juara A' Design Award Beusi ieu ngalebetkeun prakték pangalusna industri sarta ngabogaan ciri téknis anu mampuh pakait jeung pangweruh praktis jeung bakat. Luf Baki Bibit dihormat pikeun katelitianana sarta dirarancang pikeun méré paningkatan kualitas hirup anu mantuan ngajadikeun dunya tempat nu leuwih hadé.

Di Balik Désain

Kit Pers

Krédit, anggota tim sareng detil téknis anu disayogikeun ku désainer.

Sipat Unik: The development model of converting plastic seedling trays "from cradle to grave" to loofah biodegradable trays "from cradle to cradle". Break the loofah and hot-press glutinous rice glue to synthesize new materials. The trays can be interspersed up and down and a single person can carry more than five trays at a time. Transplanted into the soil and degraded into nutrients. The chassis can be reused or dried for crops, and the loofah seeds can also be recycled to continue seedling cultivation.
Diménsi & Bungkusan: Width 800mm x Depth 490mm x Height 70mm，The size of the hole plate is 540 mm*280 mm. Vegetable seedlings generally use 50 to 288holes. The shape of the holes is round or square, generally between 0.6 and 1.2 mm.
Tag: Loofah, seedling tray, transportation, rural revitalization strategy, sustainable design
Téknologi Produksi: Prepare 50 parts of loofah fiber, 15 parts of bio-based green adhesive, 1 part of curing agent, and 2 parts of ethanol diluent in the weight ratio, and heat the prepared materials in the mold at 20 °C to 0.2 MPa for 60 min. The finished product has been tested for load-bearing, water seepage, stretching, and degradation. After the loofah is crushed and combined with other green raw materials, it can form a block shape, which meets the basic standards for seedling trays.
Tantangan Desain: Applying the loofah material of agricultural waste to seedling trays, from the perspective of circular design, it is necessary to meet the functionality while conforming to the sustainable design theory, and give full play to the social, cultural and commercial values of agricultural waste in the design. New rural construction under the strategy of rural revitalization. It should be explored whether this material can be directly applied to 3D printing to make more finished products.
Panalungtikan: (1)Clean up the loofah fiber to remove impurities (2) Dry the loofah fiber (3) Add binder and diluent to the dried loofah fiber and stir fully to make a premix (4) Mix well The final premix is added with curing agent and then fully stirred as a preparation (5) Heat the preparation in the mold at 20°C to 0.2MPa and pre-press for 60min (6) Heat at 20°C and press at 40MPa for 10min The finished product is obtained.
Inspirasi: In China's vigorous implementation of the rural revitalization strategy, the scale of agricultural production has expanded, leading to an increase in crop residues. With the advantages of high yield and degradability of loofah, it has been widely used in the field of seedling cultivation along with the "C2C" concept. Large-scale nursery bases are mechanized facilities and are not suitable for rural areas. Natural materials used in plant cultivation are finally back to nature.
Durasi Proyék: The project started in May 2022 and finished in January 2023 in Lu Xun Academy of Fine Arts.
Alur Operasi: Establish a closed cycle metabolic process of "production-recovery-remanufacture" of raw materials. The chassis of the whole seedling can be carried by a single person according to the weight of more than 5 trays, which are divided into three independent trays. After the plant seedlings are mature, they are transplanted into the soil, and can be cut as a whole or along the dotted line to be transplanted as independent individuals. After transplanting, they will soon decompose into the soil.
Anggota Tim: Designer: Du Heli
Designer: Jia Zhuohang
Designer: Xue Bomu
Krédit Gambar: Image #1: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #2: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #3: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #4: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #5: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023