Sprout Sepeda ku JunXiang Cheng and Yi Yang

Karya Sprout Sepeda ku JunXiang Cheng and Yi Yang nyaéta pamenang anu dihormat pisan tina 2022 A' Design Award Beusi anu bergengsi dina Katégori Kompetisi Citak 3D.

BeusiCitak 3D· 2022

Sprout Sepeda

ku JunXiang Cheng and Yi Yang

Klién: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Pamenang A' Design Award Beusi dina Katégori Citak 3D

32,018

Pamenang Panghargaan anu Diverifikasi

Verifikasi Status Panghargaan pikeun #137286

Tingali di A' Design Award Siaran Pers Lencana Panghargaan

Warna

Désain

Ngeunaan Sprout Sepeda

Sprout mangrupa sepeda anu diproduksi ngaliwatan cetak tilu diménsi. Rangka dibentuk ngaliwatan optimasi topologi, anu nempatkeun material ngan di tempat anu diperlukeun sarta ngirangan jumlah total material anu dipaké. Analisis tegangan statis maké métode élemén hingga (finite element method) mastikeun stabilitas struktur rangka. Modél ahirna dicitak maké nilon kapadetan luhur. Sepeda ieu boga ukuran panjang 1630 mm, lebar 600 mm, jeung luhur 832 mm. Prosés cetak ngaleungitkeun kabutuhan cetakan (mold) anu mahal, ku kituna unggal rangka bisa nuturkeun desain individu.

Pangakuan

Ngeunaan A' Design Award Beusi

Sprout Sepeda mangrupa juara A' Design Award Beusi, pangakuan anu bergengsi anu dipasihkeun ka desain alus anu minuhan sarat profésional jeung industri anu diharepkeun tina kréasi anu dirarancang alus. Para juara Beusi nunjukkeun kaahlian anu hébat, spésialisasi anu luhur, pamahaman ahli jeung kamampuh kréatif para kréatorna. Sprout Sepeda diharepkeun jadi kréasi anu dihargaan, dikagumi jeung dipikanyaah anu praktis jeung inovatif. Desain juara A' Design Award Beusi ieu ngalebetkeun prakték pangalusna industri sarta ngabogaan ciri téknis anu mampuh pakait jeung pangweruh praktis jeung bakat. Sprout Sepeda dihormat pikeun katelitianana sarta dirarancang pikeun méré paningkatan kualitas hirup anu mantuan ngajadikeun dunya tempat nu leuwih hadé.

Di Balik Désain

Kit Pers

Krédit, anggota tim sareng detil téknis anu disayogikeun ku désainer.

Sipat Unik: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Diménsi & Bungkusan: Length 1630mm, width600mm, height 832mm
Tag: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Téknologi Produksi: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Tantangan Desain: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Panalungtikan: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inspirasi: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Durasi Proyék: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Alur Operasi: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Anggota Tim: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao