Vista EY2T Ts'ebetso ea Mantlha: Khamera e Sebelisang Motlakase bakeng sa Tlhaolo ea Biometric ka Chris Dopp & Travis Baldwin

Moralo oa Vista EY2T Ts'ebetso ea Mantlha: Khamera e Sebelisang Motlakase bakeng sa Tlhaolo ea Biometric ka Chris Dopp & Travis Baldwin ke mohlodi oa khau e hlomphehang haholo ya 2015 Moputso oa Silevera oa A' Design Award Mokhahleong oa Tlhodisano oa Moralo wa Dihlahiswa tsa Tshireletso, Polokeho le Ho Bea Leihlo.

SileveraDihlahiswa tsa Tshireletso· 2015

Vista EY2T Ts'ebetso ea Mantlha: Khamera e Sebelisang Motlakase bakeng sa Tlhaolo ea Biometric

ka Chris Dopp & Travis Baldwin

Moreki: Vista Imaging and Crea Inc Design LTD

Mohlodi oa Moputso oa Silevera oa A' Design Award Mokhahleong oa Dihlahiswa tsa Tshireletso

25,961

Mohlodi oa Khau ea Netefaditsweng

Netefatsa Boemo ba Khau bakeng sa #40052

Etela Sebaka Sheba ho A' Design Award Tokollo ya Boraditaba Baeche ya Moputso

Mebala

Moralo

Mabapi le Vista EY2T Ts'ebetso ea Mantlha: Khamera e Sebelisang Motlakase bakeng sa Tlhaolo ea Biometric

Mongolo oa Buka: Vista EY2T ke khamera e sebelisang motlakase bakeng sa tlhaolo ea biometric ea iris le sefahleho. Sesebelisoa sena se hlahloba sebaka se bonoang bakeng sa lifahleho, ebe limotara li thibolla khamera hore e shebane le mahlo. Kabo e sephara ea li-infrared LED hammoho le tsamaiso ea autofocus li lumella ho nkuoa ha litšoantšo boholong ba li-fithi tse 3 ho isa ho tse 6, kahoo ho ea shebana ka letsoho ha ho hlokahale. Li-sensor tse robong tsa ka pele li kopantsoe ka mor'a sefahleho se le seng se ntsho, 'me sebōpeho sa cylinder se kang philisi se nang le mafelo a chodileng se theha sebōpeho se khutsitseng se sa tšosetseng. Khamera e ka sebelisoa e le eona feela kapa ka mokhoa oa ho hoketsoa leboteng.

Kamohelo

Mabapi le Moputso oa Silevera oa A' Design Award

Vista EY2T Ts'ebetso ea Mantlha: Khamera e Sebelisang Motlakase bakeng sa Tlhaolo ea Biometric ke mohapi oa Moputso oa Silevera oa A' Design Award, kananelo e hlomphehang haholo e fuoang meralo e phahameng ka ho fetesisa, e ntle le e tsosang maikutlo. Bahapi ba Silevera ke mesebetsi e khanyang haholo le e nang le boqapi bo ikhethang e bontšang botsebi, talenta le bohlale ba baqapi ba eona. Vista EY2T Ts'ebetso ea Mantlha: Khamera e Sebelisang Motlakase bakeng sa Tlhaolo ea Biometric e lebelletsoe ho ba mosebetsi o motle, oa mohlala, o nang le boprofeshenale bo bonahalang le mehopolo e mecha e tebileng. Moralo ona o hapileng Moputso oa Silevera oa A' Design Award ke mohopolo o hlokomelehang haholo le o ratoang o tlisang molemo mme o sutumelletsang meeli ea bonono, mahlale, moralo le theknoloji. Vista EY2T Ts'ebetso ea Mantlha: Khamera e Sebelisang Motlakase bakeng sa Tlhaolo ea Biometric ke mosebetsi oo batho ba bangata ba o lakatsang, o tsosang litakatso, o tlisang maikutlo a matle le o tsosetsang ho makala le ho hlolla.

Ka Mora Moralo

Sete ya Boraditaba

Litlhaku, ditho tsa sehlopha le lintlha tsa botekgeniki tse fanoeng ke moetsi wa moralo.

Boleng bo Ikhethang: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Boholo le Phuthelo: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Lithegi: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Theknoloji ya Tlhahiso: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Phephetso ya Moralo: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Dipatlisiso: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Kgothaletso: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Nako ya Projeke: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Tsamaiso ya Mosebetsi: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Litho tsa Sehlopha: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Litlotla tsa Setshwantsho: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015