Vista EY2T Motorizovana biometrijska kamera za identifikaciju — аутор Chris Dopp & Travis Baldwin

Дизајн Vista EY2T Motorizovana biometrijska kamera za identifikaciju аутора Chris Dopp & Travis Baldwin је високо цењени добитник веома престижне награде 2015 Сребрна награда A' Design Award у категорији такмичења Дизајн безбедносних, сигурносних и надзорних производа.

СребрнаБезбедносни производи· 2015

Vista EY2T Motorizovana biometrijska kamera za identifikaciju

аутор: Chris Dopp & Travis Baldwin

Клијент: Vista Imaging and Crea Inc Design LTD

Добитник награде Сребрна награда A' Design Award у категорији Безбедносни производи

25,961

Верификовани добитник награде

Верификујте статус награде за #40052

Посетите сајт Погледајте на A' Design Award Саопштење за медије Значка награде

Боје

Дизајн

О дизајну Vista EY2T Motorizovana biometrijska kamera za identifikaciju

Vista EY2T je motorizovana biometrijska kamera za identifikaciju putem prepoznavanja irisa i lica. Uređaj skenira vidno polje u potrazi za licima, a zatim motori rotiraju kameru kako bi se usmerila ka očima. Široko rasprostranjene infracrvene LED diode i sistem za automatsko fokusiranje omogućavaju snimanje na udaljenosti od 0,9 do 1,8 metara, tako da ručno ciljanje nije potrebno. Devet prednjih senzora objedinjeno je iza jedinstvene crne površine, a cilindričan oblik kapsule sa zaobljenim ivicama stvara smiren i neugrožavajući izgled. Kamera se može koristiti samostalno ili uz zidni nosač.

Признање

О награди Сребрна награда A' Design Award

Vista EY2T Motorizovana biometrijska kamera za identifikaciju је добитник Сребрне награде A' Design Award, изузетно престижног признања које се додељује врхунским, предивним и импресивним дизајнима. Добитници Сребрне награде неизмерно су бриљантна и изузетно креативна дела која илуструју изузетну стручност, таленат и оштроумност својих дизајнера. Очекује се да Vista EY2T Motorizovana biometrijska kamera za identifikaciju буде дивно, узорно дело, запажено професионално и дубоко иновативно. Овај дизајн награђен Сребрном наградом A' Design Award веома је запажен, дивљен изум који користи и помера границе уметности, науке, дизајна и технологије. Vista EY2T Motorizovana biometrijska kamera za identifikaciju је творевина којој многи завиде, која буди жеље, доноси позитивна осећања и изазива чуђење и дивљење.

Иза дизајна

Комплет за медије

Заслуге, чланови тима и технички детаљи које је обезбедио дизајнер.

Јединствене карактеристике: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Димензије и паковање: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Ознаке: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Технологија производње: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Дизајнерски изазов: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Истраживање: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Инспирација: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Трајање пројекта: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Ток рада: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Чланови тима: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Заслуге за фотографије: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015