Delo Saltatur Miza avtorja Masoud Akbarzadeh je izjemno cenjeni dobitnik prestižne nagrade 2020 Srebrna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje pohištva.
SrebrnaPohištvo· 2020
Saltatur Miza
avtor/ica: Masoud Akbarzadeh
Naročnik: Polyhedral Structure Laboratory
Dobitnik nagrade Srebrna nagrada A' Design Award v kategoriji Pohištvo
Potrjeni dobitnik nagrade
Preverite status nagrade za #99680Dizajn
O dizajnu Saltatur Miza
Saltatur je miza z velikim razponom, zasnovana kot montažna kompozitna konstrukcija. Miza združuje betonsko telo, ki deluje izključno v tlaku, prednapete jeklene palice in ultratanko stekleno ploščo. Steklena plošča je oblikovana kot funikularni tridelni obok s tremi zgibi, ki premošča razpon 3,75 metra. Konstrukcijska oblika je bila razvita s pomočjo tridimenzionalne grafične statike, tako da betonsko telo držita v tlaku nateznii vezi na vrhu in dnu. Diskretni prostorski sistem zmanjšuje količino betona in ogljični odtis, hkrati pa ohranja maso, potrebno za konstrukcijsko učinkovitost.
Priznanje
O nagradi Srebrna nagrada A' Design Award
Saltatur Miza je prejemnik Srebrne nagrade A' Design Award, izjemno prestižnega priznanja, ki se podeljuje čudovitim, impresivnim vrhunskim oblikovanjem. Prejemniki Srebrne nagrade so izjemno briljantna in zelo ustvarjalna dela, ki ponazarjajo izjemno strokovnost, talent in bistrost svojih oblikovalcev. Od Saltatur Miza se pričakuje, da bo čudovito, zgledno delo, opazno profesionalno in globoko inovativno. To oblikovanje, nagrajeno s Srebrno nagrado A' Design Award, je zelo opazen, občudovan izum, ki koristi in premika meje umetnosti, znanosti, oblikovanja in tehnologije. Saltatur Miza je stvaritev, ki ji mnogi zavidajo, ki prebuja želje, prinaša pozitivna čustva in vzbuja začudenje in občudovanje.
V ozadju dizajna
Komplet za medije
Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.
- Edinstvene lastnosti
- The Saltatur demonstrates innovative research in the design and fabrication of a prefab, discrete, spatial composite structure consisting of a spatial, compression-only concrete body, post-tensioning steel rods, and an ultra-thin glass structure on its top in the form of long-span furniture. Using discrete spatial systems would minimize the volume of concrete and the carbon footprint while preserving the necessary mass for structural performance and specific architectural detailing.
- Dimenzije in embalaža
- 195 cm (W) x 308 cm (L) x 90 cm (H)
- Oznake
- composite, ultra thin spatial concrete, design for reassembly, funicular structures
- Proizvodna tehnologija
- There are multiple design innovations in various phases of the realization of this project, from conceptual structural design to fabrication. The structural form of the project was developed using 3D/polyhedral graphic statics with a very particular control over the magnitude of the horizontal forces in the system. As a result, the entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports.
- Oblikovalski izziv
- Challenges include the concrete casting of complex 3d nodes, detail development that can allow for easy assembly and disassembly, ultra thin (4mm) glass top spanning 3 meters to support the applied loads and its self-weight.
- Raziskave
- The structural form of the furniture was designed using a newly developed method of 3D Graphic Statics, which is the extension of the existing 2D methods proposed in 1864. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allowed fixing the members in their exact locations in the structure to avoid the possible spatial collision of the branches of the nodes during the assembly. The ultra-thin glass structure on the top was formed into a funicular geometry as a three-hinged discrete arch spanning 3.75 meters.
- Inspiracija
- The project has been inspired by the works of Gaudi and extends his works to a three-dimensional compression and tension combined system of forces in the form of a long span table. The structural form has been inspired by the Greco-Roman wrestling technique, Salto, which includes lifting, returning, and taking down an opponent to the mat. The geometry of the table lifts the glass top, rotates, and transfers the loads to the ground. The word 'salto' means 'to dance' in Latin. The name of our structure is Saltatur, which means 'a dancer' in Latin.
- Trajanje projekta
- 2 years, Weitzman School of Design, University of Pennsylvania
- Potek delovanja
- The Saltator is an ensemble of compression and tension forces held in a twisted configuration of equilibrium. The geometry of the structure was inspired by the Greco-Roman wrestling technique, Salto. The word 'salto' means 'to dance' in Latin, which also inspired the name of the furniture, Saltatur, 'a dancer' in Latin. The form was designed using the geometry-based method of 3D graphic statics. The structure shows how we can minimize the volume of construction materials and reduce the carbon footprint of a structure while preserving the necessary mass for structural performance.
- Patenti
- N/A
- Člani ekipe
- Masoud Akbarzadeh, Ali Tabatabaei Ghomi, Mohammad Bolhassani, Mostafa Akbari, Alireza Seyedahmadian, Konstantinos Papalexiou, Jingchu Sun, Hanqing Yao.
- Zasluge za slike
- Copyright: Polyhedral Structures Laboratory
Image credit: Polyhedral Structures Laboratory
Sponzorirano
Raziščite onkraj Designers.org
Odkrijte izdelke, storitve in priložnosti naših oglaševalskih partnerjev.
Odkrijte več
Sorodni dizajni
Raziščite več nagrajenih dizajnov iz iste kategorije, izbranih po kakovosti.
