Delo Dond Nizka Miza avtorja Jinyang Koo je izjemno cenjeni dobitnik prestižne nagrade 2020 Bronasta nagrada A' Design Award v tekmovalni kategoriji Oblikovanje pohištva.
BronastaPohištvo· 2020
Dond Nizka Miza
avtor/ica: Jinyang Koo
Naročnik: Wuui
Dobitnik nagrade Bronasta nagrada A' Design Award v kategoriji Pohištvo
Potrjeni dobitnik nagrade
Preverite status nagrade za #88288Dizajn
O dizajnu Dond Nizka Miza
Oblikovalska pripoved Donda je preprostost, vendar vsestranska. Preprost spajalni del ustvarja s 3D-tiskalnikom in minimalno zasnovo delov, da lahko potrošnik zlahka sestavi mizo ali jo razstavi za prevoz med prevozom. Cilj oblikovalca je bil, da Dond sodeluje pri vsakodnevnih potrebah potrošnikov, da uživa lažji življenjski slog za vsako priložnost v zaprtih prostorih ali na prostem. Dond uporablja preprost oblikovni pristop, na primer da zgornja površina ni pritrjena na noge in se zlahka odstrani, tako da se uporablja kot pladenj.
Priznanje
O nagradi Bronasta nagrada A' Design Award
Dond Nizka Miza je prejemnik Bronaste nagrade A' Design Award, zelo prestižnega priznanja, ki se podeljuje izjemnim oblikovanjem, ki se odlikujejo po ustvarjalnosti, iznajdljivosti in bistrosti. Prejemniki Bronaste nagrade so v celoti spretni in presenetljivo ustvarjalni artefakti, ki potrjujejo bogate izkušnje, domišljijo in zvitost svojih oblikovalcev. Od Dond Nizka Miza se pričakuje, da bo visoko cenjen, občudovan in ljubljen predmet, opazno profesionalen in inovativen. To oblikovanje, nagrajeno z Bronasto nagrado A' Design Award, vključuje najboljše prakse v umetnosti, znanosti, oblikovanju in tehnologiji ter je odlično po pozornosti do podrobnosti. Dond Nizka Miza sijajno zadovoljuje potrebe, se dotika želja, očara čustva in vzbuja radovednost.
V ozadju dizajna
Komplet za medije
Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.
- Edinstvene lastnosti
- Dond is a small and yet versatile low table. In order to apply a simple assembly method, A joint part is designed so that it can be easily assembled. The joint parts is made by 3D printer. The results from our experiment shows that the intensity of Dond can be increased by using three joint parts or more.The board surface of Dond is not attached with the parts below, therefore, the board is a multipurpose tool for our daily life. Eg. Tray
- Dimenzije in embalaža
- Top: 330mmx330mmx15mm
Overall Height: 415mm - Oznake
- Low table, Table, Future technology, Japanese, Minimal, Joint, DIY, Portable
- Proizvodna tehnologija
- The joint parts is made by 3D printing technology while the table top and bottom are hand made. Japanese Sugi (cedar wood) is used as the main material for the parts of Dond.
- Oblikovalski izziv
- Although 3D printing technology and wooden crafting can be fused seamlessly, but we are not sure about the sustainability of the combination during our research process. However the issue has been solved by conducting different experiments like attempting on different measurements of the parts.
- Raziskave
- During the research stage, multiple test conducted to check against Dond's durability and sustainability ensuring the design maintain lightweight and versatile. Different 3D materials was use including thickness measure for the jointing during this stage to successfully pass the test. Several collisions occurred during this stage resulted the designer to have selected Resins as the main material for the jointing part for Dond. Multiple test combination of size, material, wood thickness and weight measure has allowed the designer to accomplished and present the final stage of Dond.
- Inspiracija
- The design inspiration of Dond comes from the frustration of bringing a huge table out for picnic or any outdoor occasions. The designer wanted to design a low table that can be easily assembled and has a high space efficiency.
- Trajanje projekta
- The project was started and finished on October 2017 in Osaka and exhibited at "Composition 2017".
- Potek delovanja
- Dond can be easily assembled by attaching the legs to the main pole via the joint parts while the table top can be placed on top of it. The amount of table legs can be increased for stability by just simply adding more joint parts to the pole, and the table top can be removed anytime for other purpose.
Dond is designed to be light and handy. It could be easily disassembled for transportation and assemble for usage in any occasions. The minimalism approach of Dond allows it to fit in any location. - Člani ekipe
- JINYANG KOO
Sponzorirano
Raziščite onkraj Designers.org
Odkrijte izdelke, storitve in priložnosti naših oglaševalskih partnerjev.
Odkrijte več
Sorodni dizajni
Raziščite več nagrajenih dizajnov iz iste kategorije, izbranih po kakovosti.
