Dizajn Saltatur Stôl od dizajnéra Masoud Akbarzadeh je vysoko uznávaným víťazom veľmi prestížneho ocenenia 2020 Strieborná cena A' Design Award v súťažnej kategórii Dizajn nábytku.
StriebornáNábytok· 2020
Saltatur Stôl
Klient: Polyhedral Structure Laboratory
Víťaz ocenenia Strieborná cena A' Design Award v kategórii Nábytok
Overený víťaz ocenenia
Overiť stav ocenenia pre #99680Dizajn
O dizajne Saltatur Stôl
Saltatur je stôl s veľkým rozponom navrhnutý ako prefabrikovaná kompozitná konštrukcia. Stôl kombinuje betónové telo namáhané výlučne na tlak, dodatočne predpínané oceľové tyče a ultratenkú sklenenú dosku. Sklenená doska má tvar lanovnicového trojkĺbového oblúka s rozponom 3,75 metra. Konštrukčná forma bola vyvinutá pomocou trojrozmernej grafickej statiky, takže betónové telo je udržiavané v tlaku ťahovými spojmi v hornej a spodnej časti. Diskrétny priestorový systém znižuje objem betónu a uhlíkovú stopu, pričom zachováva hmotu potrebnú pre konštrukčnú výkonnosť.
Ocenenie
O ocenení Strieborná cena A' Design Award
Saltatur Stôl je laureát Striebornej ceny A' Design Award, mimoriadne prestížneho uznania udeľovaného nádherným, pôsobivým dizajnom najvyššej kvality. Laureáti Striebornej ceny sú nesmierne brilantné a mimoriadne kreatívne diela, ktoré ilustrujú výnimočnú odbornosť, talent a bystrosť svojich dizajnérov. Od Saltatur Stôl sa očakáva, že bude úžasným, vzorovým dielom, pozoruhodne profesionálnym a hlboko inovatívnym. Tento dizajn ocenený Striebornou cenou A' Design Award je veľmi pozoruhodný, obdivovaný vynález, ktorý prináša úžitok a posúva hranice umenia, vedy, dizajnu a technológie. Saltatur Stôl je výtvor, ktorému mnohí závidia, ktorý vzbudzuje túžby, prináša pozitívne pocity a vyvoláva úžas a údiv.
Za dizajnom
Tlačový kit
Kredity, členovia tímu a technické údaje poskytnuté dizajnérom.
- Jedinečné vlastnosti
- The Saltatur demonstrates innovative research in the design and fabrication of a prefab, discrete, spatial composite structure consisting of a spatial, compression-only concrete body, post-tensioning steel rods, and an ultra-thin glass structure on its top in the form of long-span furniture. Using discrete spatial systems would minimize the volume of concrete and the carbon footprint while preserving the necessary mass for structural performance and specific architectural detailing.
- Rozmery a balenie
- 195 cm (W) x 308 cm (L) x 90 cm (H)
- Štítky
- composite, ultra thin spatial concrete, design for reassembly, funicular structures
- Výrobná technológia
- There are multiple design innovations in various phases of the realization of this project, from conceptual structural design to fabrication. The structural form of the project was developed using 3D/polyhedral graphic statics with a very particular control over the magnitude of the horizontal forces in the system. As a result, the entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports.
- Dizajnérska výzva
- Challenges include the concrete casting of complex 3d nodes, detail development that can allow for easy assembly and disassembly, ultra thin (4mm) glass top spanning 3 meters to support the applied loads and its self-weight.
- Výskum
- The structural form of the furniture was designed using a newly developed method of 3D Graphic Statics, which is the extension of the existing 2D methods proposed in 1864. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allowed fixing the members in their exact locations in the structure to avoid the possible spatial collision of the branches of the nodes during the assembly. The ultra-thin glass structure on the top was formed into a funicular geometry as a three-hinged discrete arch spanning 3.75 meters.
- Inšpirácia
- The project has been inspired by the works of Gaudi and extends his works to a three-dimensional compression and tension combined system of forces in the form of a long span table. The structural form has been inspired by the Greco-Roman wrestling technique, Salto, which includes lifting, returning, and taking down an opponent to the mat. The geometry of the table lifts the glass top, rotates, and transfers the loads to the ground. The word 'salto' means 'to dance' in Latin. The name of our structure is Saltatur, which means 'a dancer' in Latin.
- Trvanie projektu
- 2 years, Weitzman School of Design, University of Pennsylvania
- Pracovný postup
- The Saltator is an ensemble of compression and tension forces held in a twisted configuration of equilibrium. The geometry of the structure was inspired by the Greco-Roman wrestling technique, Salto. The word 'salto' means 'to dance' in Latin, which also inspired the name of the furniture, Saltatur, 'a dancer' in Latin. The form was designed using the geometry-based method of 3D graphic statics. The structure shows how we can minimize the volume of construction materials and reduce the carbon footprint of a structure while preserving the necessary mass for structural performance.
- Patenty
- N/A
- Členovia tímu
- Masoud Akbarzadeh, Ali Tabatabaei Ghomi, Mohammad Bolhassani, Mostafa Akbari, Alireza Seyedahmadian, Konstantinos Papalexiou, Jingchu Sun, Hanqing Yao.
- Zdroje obrázkov
- Copyright: Polyhedral Structures Laboratory
Image credit: Polyhedral Structures Laboratory
Sponzorované
Objavte viac za hranicami Designers.org
Objavte produkty, služby a príležitosti od našich reklamných partnerov.
Objavte viac
Súvisiace dizajny
Objavte ďalšie ocenené dizajny z rovnakej kategórie, vybrané podľa kvality.
