Carbon Activated Timber Bench Lavica od Michael Budig and Kenneth Tracy

Dizajn Carbon Activated Timber Bench Lavica od dizajnéra Michael Budig and Kenneth Tracy je vysoko uznávaným víťazom veľmi prestížneho ocenenia 2020 Bronzová cena A' Design Award v súťažnej kategórii Udržateľný produkt.

BronzováUdržateľný produkt· 2020

Carbon Activated Timber Bench Lavica

od Michael Budig and Kenneth Tracy

Klient: Singapore University of Technology and Design

Víťaz ocenenia Bronzová cena A' Design Award v kategórii Udržateľný produkt

24,106

Overený víťaz ocenenia

Overiť stav ocenenia pre #89216

Zobraziť na A' Design Award Tlačová správa Ocenenie – odznak

Farby

Dizajn

O dizajne Carbon Activated Timber Bench Lavica

Uhlíkom aktivovaná drevená lavica je navrhnutá pre verejné priestory a je vyrobená z regenerovaných drevených dosák. Spochybňuje predstavy o hmotnosti a stabilite. Zatiaľ čo objem drevených dosák pôsobí ako zdanlivo masívne bloky, sú len voľne spojené a sú v nestabilnom stave. Jemné uhlíkové vlákna spájajú masívne bloky dohromady a poskytujú im stabilitu. Zároveň bloky vystužujú a dokonca zvyšujú pevnosť drevených dosák.

Ocenenie

O ocenení Bronzová cena A' Design Award

Carbon Activated Timber Bench Lavica je laureát Bronzovej ceny A' Design Award, vysoko prestížneho uznania udeľovaného vynikajúcim dizajnom, ktoré sa vyznačujú kreativitou, vynaliezavosťou a bystrosťou. Laureáti Bronzovej ceny sú plne zručné a nápadne kreatívne artefakty, ktoré potvrdzujú rozsiahle skúsenosti, predstavivosť a zdatnosť svojich dizajnérov. Od Carbon Activated Timber Bench Lavica sa očakáva, že bude vysoko cenený, obdivovaný a milovaný predmet, pozoruhodne profesionálny a inovatívny. Tento dizajn ocenený Bronzovou cenou A' Design Award zahŕňa najlepšie postupy v umení, vede, dizajne a technológii a vyniká pozornosťou k detailom. Carbon Activated Timber Bench Lavica skvele uspokojuje potreby, dotýka sa túžob, očarúva city a vzbudzuje zvedavosť.

Za dizajnom

Tlačový kit

Kredity, členovia tímu a technické údaje poskytnuté dizajnérom.

Jedinečné vlastnosti: The bench uses reclaimed wood planks that through their re-application continue to store carbon, since the living trees absorb CO2 from the environment. The re-use of the wood hence contributes to a positive ecological balance. Carbon is re-combined with the wood in a different state, as minimal amounts of high tech fibres that are strategically placed to enhance the capacity of the wood planks.
Rozmery a balenie: Dimensions: 3000 x 830 x 400 mm
Volume: 0.1736 m3
Mass: 128 kg of reclaimed hardwood from outdoor deckings
Carbon fibers, total mass: 0.623 kg (around 800m of 12k carbon fibre tow)
Štítky: Reclaimed wood, carbon fibres, robotic milling, traditional crafts
Výrobná technológia: The bench reflects craftsmanship in a contemporary context, where computational design and fabrication have become state of the art. After stacking reclaimed wood planks into solid blocks, an industrial robotic arm mills the blocks into their final geometries with paths for the subsequent reiforcement with fibres. The reclaimed wood planks store carbon and contribute to a positive ecological balance, whereas carbon is re-combined as minimal amounts of high tech fibres, strategically placed to enhance the capacity of the wood planks.
Dizajnérska výzva: Reclaimed wood simultaneously diverts waste and reduces the energy by forgoing the effort needed to obtain virgin materials. The finishing and fabrication contribute to making a durable, robust piece of furniture sequestering carbon for longer and reducing the need for replacements. Finally augmenting the performance of wood beyond its inherent structural capacity increases the potential range of use so it can be used differently for both industrial design and architecture.
Výskum: The bench design highlights the expertise present in large-scale furniture carpentry in a combination of experienced labor with new forms of craft, digital calibration and robotic fabrication. By augmenting the reclaimed wood with carbon fibers, the project proves that small amounts of high-performance materials can be used alongside carbon-negative wood elements. This new design direction increases productivity and sustainability through the use of new design and manufacturing technologies.
Inšpirácia: Juxtaposing old, weathered hardwood with precise smooth carving and high-tech carbon fiber gives the piece a unique character. This novel expression fuses high tech carving, patina, natural wood grain, digitally designed weaving patterns and precise manufacturing. This points towards an optimized, calibrated future of sustainable design and recalls vernacular traditions of textile and wood construction. Lashing, wood joinery and timber frames act as both cultural and technological precedents.
Trvanie projektu: Conversations started in late December 2016, and the design was completed in November 2018 and installed on the grounds of Mapletree Business City 2, Singapore
Pracovný postup: Initiated by the opportunity to reuse wood decking boards the project leverages high performance materials and new techniques to renew the old materials and create a sustaining piece of furniture. An elongated pattern of tightly wound carbon fiber strands rest within robotically carved groves to hold the massive stack of blocks together. Precise, continuous curvature combined with tapered edges form a comfortable low-profile object that looks lightweight despite being 140kg
Členovia tímu: Principal Designer: Michael Budig
Principal Designer: Kenneth Tracy
Sachin Gupta
Kerine Kua
Dhileep Kumar
Lee Le Xiu Jean
Melissa Lee Wen Hui
Seah Jia Neng
Daniel Yong Kaijie
Robotic Fabricator: Singapore Composite Cluster
Wood Fabricator: Hon Nam Lee
Zdroje obrázkov: Michael Budig and Kenneth Tracy, Singapore University of Technology and Design