Dizajn Wall V4 Televízny stojan od dizajnéra Nakamura Co. je vysoko uznávaným víťazom veľmi prestížneho ocenenia 2023 Strieborná cena A' Design Award v súťažnej kategórii Dizajn nábytku.
StriebornáNábytok· 2023
Wall V4 Televízny stojan
od Nakamura Co.
Klient: Wall
Víťaz ocenenia Strieborná cena A' Design Award v kategórii Nábytok
Overený víťaz ocenenia
Overiť stav ocenenia pre #148555Dizajn
O dizajne Wall V4 Televízny stojan
Wall V4 je voľne stojaci televízny stojan navrhnutý na umiestnenie veľkých obrazoviek blízko steny. Televízory s uhlopriečkou až 90 palcov od mnohých výrobcov možno bezpečne namontovať v požadovanej výške. Nosný stĺp ponúka osem výškových úrovní po 5 mm. Káble a skrutky sú skryté vo vnútri dvojvrstvového panelu, takže inštalácia zostáva úhľadná. Základňa je vyrobená z 2 mm oceľového plechu tvarovaného lisovaním a spevneného radiálnym rámom, vďaka čomu zostáva hrana tenká a znižuje sa riziko zakopnutia. Montáž je jednoduchá a nevyžaduje žiadne úpravy miestnosti.
Ocenenie
O ocenení Strieborná cena A' Design Award
Wall V4 Televízny stojan je laureát Striebornej ceny A' Design Award, mimoriadne prestížneho uznania udeľovaného nádherným, pôsobivým dizajnom najvyššej kvality. Laureáti Striebornej ceny sú nesmierne brilantné a mimoriadne kreatívne diela, ktoré ilustrujú výnimočnú odbornosť, talent a bystrosť svojich dizajnérov. Od Wall V4 Televízny stojan sa očakáva, že bude úžasným, vzorovým dielom, pozoruhodne profesionálnym a hlboko inovatívnym. Tento dizajn ocenený Striebornou cenou A' Design Award je veľmi pozoruhodný, obdivovaný vynález, ktorý prináša úžitok a posúva hranice umenia, vedy, dizajnu a technológie. Wall V4 Televízny stojan je výtvor, ktorému mnohí závidia, ktorý vzbudzuje túžby, prináša pozitívne pocity a vyvoláva úžas a údiv.
Za dizajnom
Tlačový kit
Kredity, členovia tímu a technické údaje poskytnuté dizajnérom.
- Jedinečné vlastnosti
- With WALL V4, almost any TV can be mounted neatly by hanging it on the wall.
Large size TVs (up to 90 inch) from various manufacturers can be installed safely at the preferred height of users. Assembly work is quite simple and requires no special revamping in the room. No wirings or screws are visible externally bringing a sense of harmony and unity with the interior of the user’s living environment. - Rozmery a balenie
- Width 830mm x Depth 520mm x Height 1265mm
- Štítky
- TV stand, interior, TV accessory, caster, cable storage, audio-visual experience, space-saving design,
- Výrobná technológia
- The structure is based on a 2 mm steel plate that was pressed into a 3D shape and supported by a radial frame in order to achieve a thickness of 2 mm between the base and the floor. The supporting pillar and cables are hidden inside a double-layered panel, The panel slides along that extends when changing the height. Satin powder coating was applied to the entire body, and a woodgrain finish was baked on the surface of the panel giving a texture of high-quality furniture.
- Dizajnérska výzva
- The challenge was to secure strength in a very thin base structure. Since an iron plate alone does not have enough strength, the base includes a set of enforcing elements radially arranged to complement the strength of the 2 mm plate. This structure provides visual neatness and effective spatial utilization. This method proved its effectiveness through repeated vibration tests in a lab that can simulate the strongest earthquakes in Japan.
- Výskum
- As conventional TV benches/stands are usually too bulky and easily stands out in a confined room space, our design focused on bringing the TV as close as possible to the wall by reducing the TV stand’s thickness and hiding the TV wiring. Based on the knowledge that a step of 3 mm on the floor can stumble a person, we focused our attention to reduce the thickness of the base for safety reasons so that it makes a simpler and more organized setup.
- Inšpirácia
- The impetus for developing this new TV stand was to reduce wasted space.
As the size of TVs becomes larger, TV boards are also getting bigger. As for wall-mounted TVs, they require installation work and repeated height adjustment will become a cumbersome process.
WALL V4 provides a solution to such difficulties. - Trvanie projektu
- The project started in October 2020, and its development was completed in November 2021. The product was put into the market in January 2022.
- Pracovný postup
- The height of the supporting column can be adjusted with 8 levels (of 5 mm each). Since the metal bracket matches the shape of the back of the TV, it allows fine positional adjustment. Most TV types can be installed at the users’ preferred height. Optional shelves can also be added to expand this TV stand to suit the needs of all users.
- Patenty
- Design Registration No. (Japan): 1614420, 1623536
Patent Registration No. (Japan): 6865495, 6867075
Patent Application No. (Japan): 2020-540017
Design Registration No. (International): DM/101626
Design Registration No. (U.S.): US D881,174 - Členovia tímu
- Producer : Akira Nakamura
Designer : Hiroshi Tozawa
Designer : Toshiaki Komori
Supply Chain Manager : Naohisa Inoue - Zdroje obrázkov
- Image #1: Photographer Nakamura Co.Variations, 2021.
Image #2: Photographer Nakamura Co.Variations, 2021.
Image #3: Photographer Nakamura Co.Variations, 2021.
Image #4: Photographer Nakamura Co.Variations, 2021.
Image #5: Photographer Nakamura Co.Variations, 2021.
Sponzorované
Objavte viac za hranicami Designers.org
Objavte produkty, služby a príležitosti od našich reklamných partnerov.
Objavte viac
Súvisiace dizajny
Objavte ďalšie ocenené dizajny z rovnakej kategórie, vybrané podľa kvality.
