Sprout Bicykel od JunXiang Cheng and Yi Yang

Dizajn Sprout Bicykel od dizajnéra JunXiang Cheng and Yi Yang je vysoko uznávaným víťazom veľmi prestížneho ocenenia 2022 Železná cena A' Design Award v súťažnej kategórii 3D tlač.

Železná3D tlač· 2022

Sprout Bicykel

od JunXiang Cheng and Yi Yang

Klient: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Víťaz ocenenia Železná cena A' Design Award v kategórii 3D tlač

32,018

Overený víťaz ocenenia

Overiť stav ocenenia pre #137286

Zobraziť na A' Design Award Tlačová správa Ocenenie – odznak

Farby

Dizajn

O dizajne Sprout Bicykel

Sprout je bicykel vyrobený pomocou trojrozmernej tlače. Rám je tvarovaný pomocou topologickej optimalizácie, ktorá umiestňuje materiál len tam, kde je potrebný, a znižuje jeho celkové množstvo. Statická analýza napätia metódou konečných prvkov overuje stabilitu konštrukcie rámu. Finálny model je vytlačený z vysokohustotného nylonu. Bicykel má dĺžku 1630 mm, šírku 600 mm a výšku 832 mm. Tlač odstraňuje potrebu nákladných foriem, takže každý rám môže sledovať individuálny dizajn.

Ocenenie

O ocenení Železná cena A' Design Award

Sprout Bicykel je laureát Železnej ceny A' Design Award, prestížneho uznania udeľovaného dobrým dizajnom, ktoré spĺňajú profesionálne a priemyselné požiadavky očakávané od dobre navrhnutých výtvorov. Laureáti Železnej ceny preukazujú veľkú zručnosť, vysokú špecializáciu, odborné porozumenie a tvorivé schopnosti svojich tvorcov. Od Sprout Bicykel sa očakáva, že bude vysoko cenený, obdivovaný a milovaný výtvor, ktorý je praktický a inovatívny. Tento dizajn ocenený Železnou cenou A' Design Award zahŕňa najlepšie postupy v odvetví a má kompetentné technické vlastnosti spojené s know-how a talentom. Vďaka svojej dôkladnosti si Sprout Bicykel zaslúži rešpekt a jeho úlohou je prinášať zlepšenia kvality života, ktoré pomáhajú robiť svet lepším miestom.

Za dizajnom

Tlačový kit

Kredity, členovia tímu a technické údaje poskytnuté dizajnérom.

Jedinečné vlastnosti: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Rozmery a balenie: Length 1630mm, width600mm, height 832mm
Štítky: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Výrobná technológia: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Dizajnérska výzva: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Výskum: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inšpirácia: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Trvanie projektu: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Pracovný postup: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Členovia tímu: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao