Dizajn Mira Stolička od dizajnéra Cemil Yavuz je vysoko uznávaným víťazom veľmi prestížneho ocenenia 2021 Železná cena A' Design Award v súťažnej kategórii Dizajn nábytku.
ŽeleznáNábytok· 2021
Mira Stolička
od Cemil Yavuz
Klient: Cemil Yavuz
Víťaz ocenenia Železná cena A' Design Award v kategórii Nábytok
Overený víťaz ocenenia
Overiť stav ocenenia pre #116467Dizajn
O dizajne Mira Stolička
Mira je stolička navrhnutá na jedenie a všeobecné sedenie. Rám je vyrobený z troch kruhových profilov z nehrdzavejúcej ocele. Dva profily sú ohnuté v rovnakom uhle a rovnakým smerom, zatiaľ čo tretí je ohnutý iným spôsobom. K rámu sú pripevnené sedacia a operadlová plocha potiahnuté látkou, a výškovo nastaviteľné plastové nožičky dopĺňajú stoličku. Mira je ľahká a dá sa umiestniť okolo stola alebo samostatne. Stolička sa dá používať s naklonením doľava alebo doprava. Mira sa dodáva v rozloženom stave, takže používatelia môžu stoličku zložiť po vybalení.
Ocenenie
O ocenení Železná cena A' Design Award
Mira Stolička je laureát Železnej ceny A' Design Award, prestížneho uznania udeľovaného dobrým dizajnom, ktoré spĺňajú profesionálne a priemyselné požiadavky očakávané od dobre navrhnutých výtvorov. Laureáti Železnej ceny preukazujú veľkú zručnosť, vysokú špecializáciu, odborné porozumenie a tvorivé schopnosti svojich tvorcov. Od Mira Stolička sa očakáva, že bude vysoko cenený, obdivovaný a milovaný výtvor, ktorý je praktický a inovatívny. Tento dizajn ocenený Železnou cenou A' Design Award zahŕňa najlepšie postupy v odvetví a má kompetentné technické vlastnosti spojené s know-how a talentom. Vďaka svojej dôkladnosti si Mira Stolička zaslúži rešpekt a jeho úlohou je prinášať zlepšenia kvality života, ktoré pomáhajú robiť svet lepším miestom.
Za dizajnom
Tlačový kit
Kredity, členovia tímu a technické údaje poskytnuté dizajnérom.
- Jedinečné vlastnosti
- Mira is a chair made of three curved profiles basically. The chair's frame consists of a combination of three profiles. Two profiles bent in the same angle and direction and also one profile bents in a different way. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Rozmery a balenie
- Width 686 mm. x Depth 533 mm. x Height 690 mm.
As it is disassembled chair, it can be put in the carton box in smaller dimensions. - Štítky
- Bending, Metal Profile, Chair, Simple, Elegant
- Výrobná technológia
- The chair's frame consists of a combination of three profiles. These are circle section stainless steel profiles. Two profiles bent in the same angle and direction, the other one bents in a different angle. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Dizajnérska výzva
- Iconic chairs designed in the historical process were examined during the design phase of the project. Based on the motto less is more, the product was aimed to have a plain appearance and also easy to produce. During the design phase, many different drawings were made for searching ideal form. While deciding on the form, it was being paid attention to angles that the machine could bend profiles during the production phase.
- Výskum
- As the starting point of the project, it was determined as a simple, light-looking product design that would harm natural resources as little as possible. One of the aims of the project is that it will not require too many processes as a production technique. It is designed to be lightweight and disassembled considering the shipment of the product. Users can easily install the product by taking it out of the box. With the linear differences in the form, it is aimed to be remarkable in the place where it is located.
- Inšpirácia
- In this design, it is aimed to reduce the extra labor force in production. The starting point of the design was to create the frame of the chair with only 2 different metal bending processes. At the same time, the product is intended to be lightweight and simple to assemble. It is not only a design that fulfills its functionality but also has a simple appearance visually.
- Trvanie projektu
- The chair can be used in both positions, leaning left or right. Consisting of metal profiles, the product is lightweight and can be positioned around the table or singular.
- Pracovný postup
- Since the product is designed as disassembled, users can take the product out of the box and install it themselves. The chair can be used in both positions, leaning left or right. The chair made of metal profiles is light and can be positioned around the table or singular. With its simple appearance and non-standard lines, it will attract attention in the place.
Sponzorované
Objavte viac za hranicami Designers.org
Objavte produkty, služby a príležitosti od našich reklamných partnerov.
Objavte viac
Súvisiace dizajny
Objavte ďalšie ocenené dizajny z rovnakej kategórie, vybrané podľa kvality.
