Masoud Akbarzadeh طرفان Saltatur ميز انتهائي معتبر 2020 A' Design Award چاندي انعام جو فاتح آهي فرنيچر ڊيزائن مقابلي جي درجي ۾.
چانديفرنيچر· 2020
Saltatur ميز
Masoud Akbarzadeh طرفان
ڪلائنٽ: Polyhedral Structure Laboratory
فرنيچر درجي ۾ A' Design Award چاندي انعام فاتح
تصديق ٿيل ايوارڊ فاتح
ڊزائين #99680 لاءِ ايوارڊ جي حيثيت جي تصديق ڪريوڊزائن
Saltatur ميز بابت
سالٽيٽر هڪ ڊگهي-ڦهلاءَ واري ميز آهي جيڪا پيش ساخته ٺهيل مرڪب جوڙجڪ طور ڊزائين ڪئي وئي آهي. هيءَ ميز صرف دٻاءُ برداشت ڪندڙ ڪنڪريٽ باڊي، پوسٽ-ٽينشننگ اسٽيل راڊز ۽ هڪ انتهائي پتلي شيشي واري مٿاڇري کي گڏ ڪري ٿي. شيشي وارو مٿاڇرو 3.75 ميٽرن تي ڦهليل هڪ فيونيڪيولر ٽي-قبضن واري محراب جي شڪل ۾ ٺهيل آهي. جوڙجڪ جي شڪل ٽي-طرفي گرافڪ اسٽيٽڪس سان تيار ڪئي وئي هئي، انهيءَ ڪري ڪنڪريٽ باڊي کي مٿان ۽ هيٺان تناءُ وارين ٽاين ذريعي دٻاءُ ۾ رکيو ويو آهي. الڳ الڳ خلائي نظام ڪنڪريٽ جي مقدار ۽ ڪاربن جي نشان کي گهٽائي ٿو، جڏهن ته جوڙجڪ جي ڪارڪردگيءَ لاءِ گهربل ڀار کي برقرار رکي ٿو.
سڃاڻپ
A' Design Award چاندي انعام بابت
Saltatur ميز A' Design Award چاندي انعام جو کٽيندڙ آهي، غير معمولي حد تائين معزز اعتراف جيڪو اعليٰ ترين درجي جي، شاندار ۽ متاثر ڪندڙ ڊيزائنن کي ڏنو وڃي ٿو. چاندي جا کٽيندڙ تمام گهڻا روشن ۽ انتهائي تخليقي ڪم آهن، جيڪي پنهنجي ڊيزائنرن جي شاندار مهارت، صلاحيت ۽ ذڪاوت کي ظاهر ڪن ٿا. Saltatur ميز کان اميد ڪئي وڃي ٿي ته اهو هڪ شاندار نمائشي ڪم هوندو، قابل ذڪر حد تائين پيشه ورانه ۽ ڳوڙهي جدت وارو. هي ڊيزائن جنهن A' Design Award چاندي انعام کٽيو آهي، هڪ انتهائي قابل ذڪر، ساراهيل ايجاد آهي جيڪا فائدو ڏئي ٿي ۽ فن، سائنس، ڊيزائن ۽ ٽيڪنالاجي جون حدون وڌائي ٿي. Saltatur ميز هڪ اهڙي تخليق آهي جنهن تي گهڻا حسد ڪن ٿا، جيڪا خواهشون جاڳائي ٿي، مثبت جذبا آڻي ٿي ۽ حيرت ۽ تعجب جي چڻنگ ٻاري ٿي.
ڊزائن جي پسمنظر
پريس ڪِٽ
ڊزائنر طرفان فراهم ڪيل ڪريڊٽس، ٽيم ميمبرز ۽ ٽيڪنيڪل تفصيلات.
- منفرد خاصيتون
- The Saltatur demonstrates innovative research in the design and fabrication of a prefab, discrete, spatial composite structure consisting of a spatial, compression-only concrete body, post-tensioning steel rods, and an ultra-thin glass structure on its top in the form of long-span furniture. Using discrete spatial systems would minimize the volume of concrete and the carbon footprint while preserving the necessary mass for structural performance and specific architectural detailing.
- ماپ ۽ پيڪيجنگ
- 195 cm (W) x 308 cm (L) x 90 cm (H)
- ٽيگ
- composite, ultra thin spatial concrete, design for reassembly, funicular structures
- پيداواري ٽيڪنالاجي
- There are multiple design innovations in various phases of the realization of this project, from conceptual structural design to fabrication. The structural form of the project was developed using 3D/polyhedral graphic statics with a very particular control over the magnitude of the horizontal forces in the system. As a result, the entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports.
- ڊزائين چيلينج
- Challenges include the concrete casting of complex 3d nodes, detail development that can allow for easy assembly and disassembly, ultra thin (4mm) glass top spanning 3 meters to support the applied loads and its self-weight.
- تحقيق
- The structural form of the furniture was designed using a newly developed method of 3D Graphic Statics, which is the extension of the existing 2D methods proposed in 1864. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allowed fixing the members in their exact locations in the structure to avoid the possible spatial collision of the branches of the nodes during the assembly. The ultra-thin glass structure on the top was formed into a funicular geometry as a three-hinged discrete arch spanning 3.75 meters.
- الهام
- The project has been inspired by the works of Gaudi and extends his works to a three-dimensional compression and tension combined system of forces in the form of a long span table. The structural form has been inspired by the Greco-Roman wrestling technique, Salto, which includes lifting, returning, and taking down an opponent to the mat. The geometry of the table lifts the glass top, rotates, and transfers the loads to the ground. The word 'salto' means 'to dance' in Latin. The name of our structure is Saltatur, which means 'a dancer' in Latin.
- منصوبي جو عرصو
- 2 years, Weitzman School of Design, University of Pennsylvania
- عمل جو فلو
- The Saltator is an ensemble of compression and tension forces held in a twisted configuration of equilibrium. The geometry of the structure was inspired by the Greco-Roman wrestling technique, Salto. The word 'salto' means 'to dance' in Latin, which also inspired the name of the furniture, Saltatur, 'a dancer' in Latin. The form was designed using the geometry-based method of 3D graphic statics. The structure shows how we can minimize the volume of construction materials and reduce the carbon footprint of a structure while preserving the necessary mass for structural performance.
- پيٽنٽ
- N/A
- ٽيم ميمبر
- Masoud Akbarzadeh, Ali Tabatabaei Ghomi, Mohammad Bolhassani, Mostafa Akbari, Alireza Seyedahmadian, Konstantinos Papalexiou, Jingchu Sun, Hanqing Yao.
- تصوير ڪريڊٽ
- Copyright: Polyhedral Structures Laboratory
Image credit: Polyhedral Structures Laboratory
اسپانسرڊ
Designers.org کان اڳتي ڳوليو
اسان جي اشتهاري ڀائيوالن جون پراڊڪٽس، خدمتون ۽ موقعا ڳوليو.
وڌيڪ ڳولڻ لاءِ
لاڳاپيل ڊزائنز
ساڳي درجي مان وڌيڪ ايوارڊ جيتندڙ ڊزائنز ڳوليو، جيڪي قابليت جي بنياد تي چونڊيل آهن.
