Kenji Fujii ᱨᱮᱱᱟᱜ Bird's Sake Cup ᱥᱟᱠᱮ ᱠᱚᱯ

Kenji Fujii ᱨᱮᱱᱟᱜ Bird's Sake Cup ᱥᱟᱠᱮ ᱠᱚᱯ ᱫᱚ 3D ᱪᱷᱟᱯᱟ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2020 A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾

ᱨᱩᱯᱟ3D ᱪᱷᱟᱯᱟ· 2020

Bird's Sake Cup ᱥᱟᱠᱮ ᱠᱚᱯ

Kenji Fujii ᱞᱮᱠᱟᱛᱮ

ᱜᱟᱦᱟᱠ: Taki Products

3D ᱪᱷᱟᱯᱟ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ

40,718

ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ

#90213 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪ

ᱥᱟᱭᱤᱴ ᱧᱮᱞ ᱢᱮ A' Design Award ᱨᱮ ᱧᱮᱞ ᱢᱮ ᱯᱨᱮᱥ ᱨᱤᱞᱤᱡ ᱯᱩᱨᱥᱠᱟᱨ ᱵᱮᱡ

ᱨᱚᱝ

ᱰᱤᱡᱟᱭᱤᱱ

Bird's Sake Cup ᱥᱟᱠᱮ ᱠᱚᱯ ᱵᱟᱵᱚᱛ ᱛᱮ

Bird's Sake Cup ᱫᱚ ᱢᱤᱫ ᱧᱩ ᱠᱚᱯ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱟᱞᱠᱚᱦᱚᱞ ᱧᱩ ᱠᱚ ᱠᱚᱢ ᱞᱟᱹᱜᱤᱫ ᱛᱮ ᱛᱮᱭᱟᱨ ᱠᱟᱱᱟ ᱾ ᱱᱚᱶᱟ ᱠᱚᱯ ᱫᱚ ᱮᱠᱮᱱ 10 ml ᱦᱟᱸᱰᱤ ᱫᱚᱦᱚᱭᱟ, ᱚᱱᱟᱛᱮ ᱧᱩ ᱫᱚ ᱦᱩᱰᱤᱧ ᱦᱩᱰᱤᱧ ᱛᱮ ᱚᱠᱛᱚ ᱦᱟᱹᱵᱤᱡ ᱧᱩ ᱦᱩᱭᱩᱜ-ᱟ ᱾ ᱱᱚᱶᱟ ᱨᱩᱯ ᱫᱚ ᱢᱤᱫ ᱦᱩᱰᱤᱧ ᱪᱮᱸᱬᱮ ᱮᱢ ᱦᱟᱹᱛᱤᱧᱟ, ᱟᱨ ᱪᱚᱸᱪ ᱨᱮ ᱢᱤᱫ ᱵᱩᱛᱟᱹ ᱢᱮᱱᱟᱜ-ᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱦᱟᱸᱰᱤ ᱟᱞᱜᱟᱛᱮ ᱚᱰᱚᱠ ᱞᱟᱹᱜᱤᱫ ᱛᱮ ᱢᱟᱯ ᱠᱟᱱᱟ ᱾ Bird's Sake Cup ᱫᱚ ᱚᱱᱟ ᱦᱚᱲ ᱠᱚ ᱜᱚᱲᱚᱭᱟ ᱡᱟᱦᱟᱸ ᱠᱚ ᱟᱞᱠᱚᱦᱚᱞ ᱛᱮ ᱥᱮᱱᱥᱤᱴᱤᱵ ᱠᱟᱱᱟᱠᱚ ᱟᱨ ᱡᱟᱦᱟᱸ ᱠᱚ ᱟᱞᱠᱚᱦᱚᱞ ᱧᱩ ᱠᱚᱢ ᱠᱟᱠᱟ ᱞᱟᱹᱠᱛᱤᱭᱟ ᱾ ᱱᱚᱶᱟ ᱠᱚᱯ ᱫᱚ ᱛᱤᱱ-ᱫᱤᱥᱚᱢ ᱪᱷᱟᱯᱟ (three-dimensional printing) ᱦᱚᱛᱮᱛᱮ ᱫᱷᱟᱲᱚᱡ ᱮᱠᱨᱤᱞᱤᱠ ᱛᱮ ᱛᱮᱭᱟᱨ ᱠᱟᱱᱟ ᱾ ᱱᱚᱶᱟ ᱫᱚ 40 mm ᱚᱥᱟᱨ, 130 mm ᱩᱸᱪᱟᱹ ᱟᱨ 60 mm ᱡᱷᱟᱸᱡ ᱟᱨ 35 ᱜᱽᱨᱟᱢ ᱦᱟᱹᱴᱤᱧᱟ ᱾

ᱢᱟᱱᱟᱱ

A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ

Bird's Sake Cup ᱥᱟᱠᱮ ᱠᱚᱯ ᱫᱚ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱥᱩᱱᱫᱚᱨ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Bird's Sake Cup ᱥᱟᱠᱮ ᱠᱚᱯ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾

ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ

ᱯᱨᱮᱥ ᱠᱤᱴ

ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾

ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ: This container can only contain 10 ml of liquor.
And It's can only drink alcohol little by little.
People who are weak in alcohol, people who must refrain from alcohol,
It helps those people.
Also, it seems like the drinking gesture is kissing with a little bird.
It is very charming.
ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ: 40mm(W)×130mm(H)×60mm(D)/35g
ᱴᱮᱜ ᱠᱚ: Cup, sake, bird, glass, acrylic, 3D printing
ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ: Application used: Fusion 360
Output service: japan dmm.make web service
Material: Transparent acrylic
ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ: Difficult problem: A mechanism for pouring alcohol little by little.
Solution: Solved by making the shape of the hole in the beak to the optimum size.
ᱜᱚᱵᱮᱥᱚᱱᱟ: The Japanese 3D printing market is limited.
1. Aircraft parts 2. Medical 3. Auto parts 4. Mold
Challenge: Lack of daily life items used by ordinary people.
To revitalize the Japanese 3D printing market.
ᱯᱨᱮᱨᱚᱱᱟ: The opportunity was the arrival of an aging society in Japan.
As you get older, you become vulnerable to alcohol.and,
Many Japanese women are vulnerable to alcohol.
ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ: This project started in Tokyo in 2018,
Exhibited at DESIGN TOKYO in the spring of 2019.
ᱠᱟᱹᱢᱤ ᱦᱚᱨ: It becomes healthy by making it hard to drink alcohol.
People who like liquor will drink too much.
Correct usage: Take a small amount of liquor over time.
Understand your proper daily alcohol intake.
ᱯᱮᱴᱮᱱᱴ ᱠᱚ: Copyrights belong to kenji fujii, 2018.
ᱪᱤᱛᱟᱹᱨ ᱥᱟᱹᱦᱟ: Image #1: Photographer Arashi,2018.
Image #2: Photographer Arashi,2018.
Image #3: Photographer Arashi,2018.
Image #4: Photographer Arashi,2018.
Image #5: Photographer Arashi,2018.