Nuomi ᱨᱮᱱᱟᱜ C3 Sterilization ᱫᱟᱠᱟ ᱚᱲᱟᱜ ᱥᱤᱝᱠ ᱫᱚ ᱨᱟᱸᱰᱷᱟ ᱜᱷᱟᱨ ᱯᱷᱟᱨᱱᱤᱪᱟᱨ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2025 A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾
ᱨᱩᱯᱟᱨᱟᱸᱰᱷᱟ ᱜᱷᱟᱨ ᱯᱷᱟᱨᱱᱤᱪᱟᱨ· 2025
C3 Sterilization ᱫᱟᱠᱟ ᱚᱲᱟᱜ ᱥᱤᱝᱠ
Nuomi ᱞᱮᱠᱟᱛᱮ
ᱜᱟᱦᱟᱠ: Guangdong Nuomi Home Intelligent Technology Co.,Ltd
ᱨᱟᱸᱰᱷᱟ ᱜᱷᱟᱨ ᱯᱷᱟᱨᱱᱤᱪᱟᱨ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ
ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ
#172108 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪᱰᱤᱡᱟᱭᱤᱱ
C3 Sterilization ᱫᱟᱠᱟ ᱚᱲᱟᱜ ᱥᱤᱝᱠ ᱵᱟᱵᱚᱛ ᱛᱮ
ᱥᱤ3 ᱥᱴᱮᱨᱤᱞᱟᱭᱡᱮᱥᱚᱱ ᱫᱚ ᱢᱤᱫ ᱫᱟᱠᱟ ᱚᱲᱟᱜ ᱥᱤᱝᱠ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸᱨᱮ ᱠᱟᱴᱤᱝ ᱵᱚᱨᱰ ᱥᱩᱥᱟᱹᱨ ᱦᱚᱸ ᱢᱮᱥᱟ ᱛᱮᱭᱟᱨ ᱟᱠᱟᱱᱟ᱾ ᱵᱷᱤᱛᱨᱤ ᱨᱮ ᱛᱮᱭᱟᱨ ᱢᱤᱫ ᱠᱩᱴᱷᱤ ᱫᱚ ᱟᱞᱴᱨᱟᱣᱟᱭᱚᱞᱮᱴ ᱢᱟᱨᱥᱟᱞ ᱟᱨ ᱞᱚᱞᱚ ᱦᱚᱭ ᱟᱹᱪᱩᱨ ᱛᱮ 15 ᱴᱤᱯᱤᱡ ᱵᱷᱤᱛᱨᱤ ᱨᱮ ᱠᱟᱴᱤᱝ ᱵᱚᱨᱰ ᱡᱤᱣᱤᱠᱳᱲᱟ ᱛᱚᱯᱚᱫ (ᱥᱴᱮᱨᱤᱞᱟᱭᱡᱽ) ᱟᱨ ᱨᱚᱦᱚᱲ ᱮᱫᱟᱭ᱾ ᱠᱟᱴᱤᱝ ᱵᱚᱨᱰ ᱵᱷᱤᱛᱨᱤ ᱨᱮ ᱫᱚᱦᱚ ᱞᱮᱠᱷᱟᱱ ᱥᱩᱥᱟᱹᱨ ᱠᱟᱹᱢᱤ ᱟᱡ ᱛᱮᱜᱮ ᱮᱛᱦᱚᱵᱚᱜᱼᱟ, ᱟᱨ ᱢᱤᱫ ᱥᱮᱱᱥᱚᱨ ᱢᱟᱨᱥᱟᱞ ᱯᱟᱴᱤ ᱠᱟᱹᱢᱤ ᱨᱮᱭᱟᱜ ᱚᱵᱚᱥᱛᱟ ᱩᱫᱩᱜᱟᱭ᱾ ᱵᱷᱤᱛᱨᱤ ᱠᱟᱸᱛᱷ ᱨᱮ ᱱᱟᱱᱳ ᱦᱟᱭᱰᱨᱳᱯᱷᱚᱵᱤᱠ ᱞᱮᱯᱚᱱ ᱢᱮᱱᱟᱜᱼᱟ ᱡᱟᱦᱟᱸ ᱛᱮ ᱨᱚᱠᱚᱲ ᱵᱟᱭ ᱦᱩᱭᱩᱜᱼᱟ ᱟᱨ ᱟᱡ ᱛᱮᱜᱮ ᱥᱟᱯᱷᱟᱜᱼᱟ, ᱟᱨ ᱫᱟᱜ ᱚᱰᱚᱠ ᱱᱟᱞᱤ ᱨᱮ ᱡᱤᱣᱤᱠᱳᱲᱟ ᱟᱞᱚᱜᱟᱱ ᱨᱩᱯᱟᱹ ᱟᱭᱚᱱ ᱯᱚᱨᱚᱛ ᱢᱮᱱᱟᱜᱼᱟ᱾ ᱢᱮᱜᱱᱮᱴᱤᱠ ᱪᱟᱠᱩ ᱨᱮᱠ ᱥᱟᱶᱛᱮ ᱥᱤᱫ ᱞᱮᱠᱟᱛᱮ ᱫᱚᱦᱚ ᱛᱮᱭᱟᱨ ᱫᱚ ᱦᱩᱰᱤᱧ ᱫᱟᱠᱟ ᱚᱲᱟᱜ ᱨᱮ ᱡᱟᱭᱜᱟ ᱵᱟᱧᱪᱟᱣᱟᱜᱼᱟ᱾
ᱢᱟᱱᱟᱱ
A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
C3 Sterilization ᱫᱟᱠᱟ ᱚᱲᱟᱜ ᱥᱤᱝᱠ ᱫᱚ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱥᱩᱱᱫᱚᱨ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ C3 Sterilization ᱫᱟᱠᱟ ᱚᱲᱟᱜ ᱥᱤᱝᱠ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾
ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ
ᱯᱨᱮᱥ ᱠᱤᱴ
ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾
- ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ
- The C3 sterilization sink, centering around the concept of an integrated healthy kitchen, innovatively incorporates cutting board care features, with the whole care process completed in 15 minutes. UV radiation and hot air circulation for cutting board sterilization, coupled with an integrated compartment and an innovative nano hydrophobic coating, enable the product to address single functionality of traditional sinks, bacterial growth of cutting boards, and poor space utilization of kitchens.
- ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ
- 780*482*220mm
- ᱴᱮᱜ ᱠᱚ
- integrated healthy kitchen, sink with cutting board care features, cleaning, drying and sterilization, integrated compartment, auto start or stop, storage, safety, hygiene
- ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ
- The inner walls of the sink and the compartment are made of a GB 4806.9 material, and employ a nano hydrophobic coating with a contact angle of 110 degrees, achieving scratch resistant and self cleaning properties. The drainage pipe coated with an antibacterial silver ion layer kills 99.9 percent of bacteria. The fully sealed circuit system boasts an IPX7 waterproof rating, complemented by a UV lamp monitor that automatically alerts users after 6,000 hours of use, ensuring safety and durability.
- ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ
- The challenge was how to satisfy the demand of users for a hygienic, efficient kitchen. To address that, the C3 sterilization sink is equipped with dual sterilization units, including UV radiation and hot air circulation, allowing for efficient sterilization with low energy consumption. An integrated compartment supports cutting board care and knife storage to effectively simplify operation for users. The application of a multimodal sensor enables precise recognition for auto start or stop.
- ᱜᱚᱵᱮᱥᱚᱱᱟ
- In the post pandemic era, consumers pay more attention to kitchen health, and increasing small sized residences stimulate the demand for space integration. However, traditional independent sinks and sterilizers fail to meet the requirements of modern kitchens in efficiency, health, and tidiness. The C3 sterilization sink actively responds to upgraded health awareness and more compact living spaces in modern society through technological integration and spatial optimization.
- ᱯᱨᱮᱨᱚᱱᱟ
- It was found that the bacteria levels of cutting boards in 70% of households exceed safe limits. This sink integrates medical grade sterilization technology and a miniaturized drying unit. Moreover, it draws on vertical storage design from Japanese kitchens to optimize spatial utilization, while also supporting auto start or stop and incorporating a magnetic knife rack. This product enables professional sterilization in home settings, creating a healthy, efficient, and tidy kitchen ecosystem.
- ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ
- The project started in Guangdong in April, 2023 and finished in August, 2024. The product was launched in China in September, 2024.
- ᱠᱟᱹᱢᱤ ᱦᱚᱨ
- UV radiation and hot air circulation automatically start once the cutting board is placed into the compartment, with the whole care process completed in 15 minutes without any manual operation.
A smart sensor light strip indicates the working status, and the UV unit is linked with the door switch to ensure safety during sterilization.
A vertical storage design, paired with a magnetic knife rack, allows users to smoothly access and store knives, significantly enhancing efficiency.
ᱥᱯᱚᱱᱥᱚᱨᱰ
Designers.org ᱠᱷᱚᱱ ᱯᱟᱨᱚᱢ ᱛᱟᱞᱟᱥ
ᱟᱞᱮᱭᱟᱜ ᱵᱤᱜᱽᱭᱟᱯᱚᱱ ᱥᱟᱹᱜᱟᱹᱭ ᱠᱚ ᱠᱷᱚᱱ ᱯᱨᱚᱰᱟᱠᱴ, ᱥᱮᱵᱟ ᱟᱨ ᱢᱚᱠᱟ ᱩᱫᱩᱜ ᱢᱮ᱾
ᱟᱨᱦᱚᱸ ᱠᱷᱚᱡ ᱢᱮ
ᱥᱟᱹᱜᱟᱹᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ
ᱢᱤᱫ ᱞᱮᱠᱟ ᱠᱮᱴᱮᱜᱚᱨᱤ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱯᱩᱨᱥᱠᱟᱨ ᱧᱟᱢᱟᱠᱟᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱧᱮᱞ ᱢᱮ, ᱡᱚᱜᱭᱟᱛᱟ ᱧᱮᱞ ᱛᱮ ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱᱟ᱾
