Timothy Hardman ᱨᱮᱱᱟᱜ Rollerback Rocker ᱨᱚᱞᱚᱨᱵᱮᱠ ᱨᱚᱠᱚᱨ ᱫᱚ ᱯᱷᱟᱨᱱᱤᱪᱟᱨ ᱰᱤᱡᱟᱭᱤᱱ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2022 A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾
ᱞᱚᱦᱟᱯᱷᱟᱨᱱᱤᱪᱟᱨ· 2022
Rollerback Rocker ᱨᱚᱞᱚᱨᱵᱮᱠ ᱨᱚᱠᱚᱨ
Timothy Hardman ᱞᱮᱠᱟᱛᱮ
ᱜᱟᱦᱟᱠ: Timothy Hardman
ᱯᱷᱟᱨᱱᱤᱪᱟᱨ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ
ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ
#134777 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪᱰᱤᱡᱟᱭᱤᱱ
Rollerback Rocker ᱨᱚᱞᱚᱨᱵᱮᱠ ᱨᱚᱠᱚᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
ᱨᱚᱞᱚᱨᱵᱮᱠ ᱨᱚᱠᱚᱨ ᱢᱮᱱᱚᱜ ᱠᱟᱱᱟ ᱢᱤᱫ ᱲᱩᱞᱟᱹᱲ ᱠᱩᱨᱥᱤ ᱡᱟᱦᱟᱸ ᱟᱰᱡᱚᱥᱴᱮᱵᱩᱞ, ᱠᱟᱹᱨᱭᱟᱹ ᱚᱠᱚᱭ ᱞᱟᱹᱜᱤᱫ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱᱟ ᱾ ᱣᱮᱞᱰ ᱠᱟᱱᱟ ᱢᱮᱴᱟᱞ ᱯᱷᱨᱮᱢ ᱨᱮ ᱚᱞ ᱨᱮ ᱠᱟᱴ ᱟᱠᱟᱱ ᱣᱟᱞᱱᱟᱴ ᱠᱟᱴᱷ ᱠᱚ ᱮᱢ ᱟᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱡᱟᱠᱟᱛ ᱨᱮ ᱥᱮᱴ ᱠᱟᱴᱷᱤ ᱠᱚ ᱥᱟᱶ ᱴᱷᱤᱠ ᱠᱟᱱᱟ ᱟᱨ ᱥᱮᱴ ᱮᱥᱠᱨᱩ ᱠᱚ ᱥᱟᱶ ᱵᱟᱸᱫᱷᱟᱭ ᱟᱠᱟᱱᱟ ᱾ ᱥᱤᱞᱤᱱᱰᱨᱤᱠᱟᱞ ᱞᱮᱫᱟᱨ ᱠᱩᱥᱚᱱ ᱠᱚ ᱢᱟᱩᱱᱴᱤᱝ ᱨᱚᱰ ᱨᱮ ᱠᱟᱴᱷᱟᱣ ᱠᱟᱱᱟᱭ, ᱟᱨ ᱡᱟᱦᱟᱸ ᱨᱮ ᱫᱚᱦᱚ ᱠᱟᱱ ᱢᱟᱱᱟᱣ ᱦᱚᱲ ᱟᱭᱠᱟᱱ ᱨᱮᱠᱚ ᱨᱮᱵᱟᱦᱟᱠᱟᱛᱮ ᱴᱤᱠᱟᱹᱭ ᱡᱚᱛᱚ ᱚᱠᱛᱚ ᱨᱮ ᱦᱟᱛᱟᱣ ᱫᱟᱲᱮᱭᱟᱜ ᱵᱚᱫᱚᱞ ᱫᱟᱲᱮᱭᱟᱜ ᱾ ᱱᱚᱶᱟ ᱠᱟᱱᱟ ᱟᱭᱢᱟ ᱟᱨ ᱮᱴᱟᱜ ᱦᱚᱸ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟᱭ, ᱡᱟᱦᱟᱸ ᱫᱳᱥᱟᱨ ᱵᱚᱫᱚᱞ ᱫᱟᱲᱮᱭᱟᱜ ᱟᱛᱠᱟᱨ ᱥᱮᱞᱮᱫ ᱠᱟᱱᱟ ᱾ ᱲᱩᱞᱟᱹᱲ ᱠᱩᱨᱥᱤ ᱠᱚ ᱢᱮᱴᱟᱞ ᱯᱷᱨᱮᱢ ᱨᱮᱱᱟᱜ ᱠᱩᱱᱚᱨ ᱠᱚ ᱫᱩᱠᱟᱹᱞᱚᱸ ᱮᱫᱟᱭ ᱾ ᱱᱚᱶᱟ ᱠᱟᱱᱟ ᱨᱮᱭᱟᱜ ᱢᱟᱯ ᱠᱟᱱᱟ ᱕᱗᱐ ᱢᱤᱢᱤ ᱵᱟᱭ ᱕᱗᱐ ᱢᱤᱢᱤ ᱵᱟᱭ ᱯᱲᱚ ᱢᱤᱢᱤ ᱾
ᱢᱟᱱᱟᱱ
A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
Rollerback Rocker ᱨᱚᱞᱚᱨᱵᱮᱠ ᱨᱚᱠᱚᱨ ᱫᱚ A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Rollerback Rocker ᱨᱚᱞᱚᱨᱵᱮᱠ ᱨᱚᱠᱚᱨ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾
ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ
ᱯᱨᱮᱥ ᱠᱤᱴ
ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾
- ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ
- The Rollerback Rocking chair is a unique combination of materials. The metal frame is accented with hand-cut walnut inserts, giving the piece an detailed accent that allows less severe angles than a pure metal frame. The leather cushions allow for the user to adjust and roll the cylinders as they please, letting them interact with the chair in a unique way.
- ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ
- 570 mm x 570 mm x 920 mm
- ᱴᱮᱜ ᱠᱚ
- walnut, claro walnut, chair, armchair, leather, upholstery, rocking chair
- ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ
- This piece features a welded metal frame that has hand cut walnut accents. The walnut accents slot into the frame and are attached with set screws. The piece required immense attention to detail to get the pieces to set into the metal correctly, especially the curved arm insert. The legs are attached with Festool domino joiner and the cushions are sewn with leather.
- ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ
- The hardest part of this project was the walnut inserts. In order to get the curved arm insert in, the chair needed to be welded together with the insert in, allowing no margin for error or second shot once it was in.
- ᱜᱚᱵᱮᱥᱚᱱᱟ
- This piece rested on precise geometry. Designing a chair requires very subtle angles, which only increases when doing a rocking chair. Add to that the walnut accents and the attention to detail in this piece was immense. Timothy spent weeks designing this piece and going over the math to get it right before starting.
- ᱯᱨᱮᱨᱚᱱᱟ
- Timothy's inspiration for this piece mostly came from his disinterest in armchairs. Seating is one of the most intimate furniture designs as it requires the most physical interaction of the user. By incorporating freely moving cushions on the chair, the user can rock in it as well as adjust while seated by rolling their back into the cushions as needed.
- ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ
- The project started in October 2020 in San Francisco and finished in June 2021.
- ᱠᱟᱹᱢᱤ ᱦᱚᱨ
- This rocking chair allows for the user to interact with it in many ways. The user can rock forwards and backwards as well as up and down. The cylindrical cushions can spin on their mounting rods and let the user continually adjust while seated.
ᱥᱯᱚᱱᱥᱚᱨᱰ
Designers.org ᱠᱷᱚᱱ ᱯᱟᱨᱚᱢ ᱛᱟᱞᱟᱥ
ᱟᱞᱮᱭᱟᱜ ᱵᱤᱜᱽᱭᱟᱯᱚᱱ ᱥᱟᱹᱜᱟᱹᱭ ᱠᱚ ᱠᱷᱚᱱ ᱯᱨᱚᱰᱟᱠᱴ, ᱥᱮᱵᱟ ᱟᱨ ᱢᱚᱠᱟ ᱩᱫᱩᱜ ᱢᱮ᱾
ᱟᱨᱦᱚᱸ ᱠᱷᱚᱡ ᱢᱮ
ᱥᱟᱹᱜᱟᱹᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ
ᱢᱤᱫ ᱞᱮᱠᱟ ᱠᱮᱴᱮᱜᱚᱨᱤ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱯᱩᱨᱥᱠᱟᱨ ᱧᱟᱢᱟᱠᱟᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱧᱮᱞ ᱢᱮ, ᱡᱚᱜᱭᱟᱛᱟ ᱧᱮᱞ ᱛᱮ ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱᱟ᱾
