Erol Erdinchev ᱨᱮᱱᱟᱜ Linap ᱞᱩᱜᱽᱲᱤ ᱞᱟᱴᱷᱟᱹᱣᱜ ᱠᱷᱚᱸᱴᱟ

Erol Erdinchev ᱨᱮᱱᱟᱜ Linap ᱞᱩᱜᱽᱲᱤ ᱞᱟᱴᱷᱟᱹᱣᱜ ᱠᱷᱚᱸᱴᱟ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱ ᱜᱩᱱᱚᱛ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2021 A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾

ᱨᱩᱯᱟᱰᱤᱡᱟᱭᱤᱱ ᱜᱩᱱᱚᱛ· 2021

Linap ᱞᱩᱜᱽᱲᱤ ᱞᱟᱴᱷᱟᱹᱣᱜ ᱠᱷᱚᱸᱴᱟ

Erol Erdinchev ᱞᱮᱠᱟᱛᱮ

ᱜᱟᱦᱟᱠ: E.E. Design - Erol Erdinchev

ᱰᱤᱡᱟᱭᱤᱱ ᱜᱩᱱᱚᱛ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ

73,105

ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ

#119517 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪ

ᱥᱟᱭᱤᱴ ᱧᱮᱞ ᱢᱮ A' Design Award ᱨᱮ ᱧᱮᱞ ᱢᱮ ᱯᱨᱮᱥ ᱨᱤᱞᱤᱡ ᱯᱩᱨᱥᱠᱟᱨ ᱵᱮᱡ

ᱨᱚᱝ

ᱰᱤᱡᱟᱭᱤᱱ

Linap ᱞᱩᱜᱽᱲᱤ ᱞᱟᱴᱷᱟᱹᱣᱜ ᱠᱷᱚᱸᱴᱟ ᱵᱟᱵᱚᱛ ᱛᱮ

ᱱᱚᱶᱟ ᱪᱚᱨᱚᱠ ᱞᱩᱜᱽᱲᱤ ᱞᱟᱴᱷᱟᱹᱣᱜ ᱠᱷᱚᱸᱴᱟ ᱫᱚ ᱟᱹᱰᱤ ᱢᱟᱨᱟᱝ ᱮᱴᱠᱮᱴᱚᱬ ᱠᱚ ᱨᱮᱱᱟᱜ ᱩᱠᱩ ᱮᱢᱟᱭ - ᱪᱤᱠᱟᱹᱬ ᱠᱚᱞᱚᱨ ᱞᱩᱜᱽᱲᱤ ᱵᱚᱞᱚᱱ ᱨᱮᱱᱟᱜ ᱮᱴᱠᱮᱴᱚᱬ, ᱵᱷᱤᱛᱨᱤ ᱞᱩᱜᱽᱲᱤ ᱞᱟᱴᱷᱟᱹᱣᱜ ᱨᱮᱱᱟᱜ ᱮᱴᱠᱮᱴᱚᱬ ᱟᱨ ᱡᱤᱣᱤ ᱛᱟᱦᱮᱸᱱ ᱫᱷᱟᱹᱲ᱾ ᱰᱤᱡᱟᱭᱤᱱ ᱨᱮᱱᱟᱜ ᱤᱱᱥᱯᱤᱨᱮᱥᱚᱱ ᱫᱚ ᱠᱟᱜᱚᱡ ᱠᱚᱞᱤᱯ ᱠᱷᱚᱱ ᱦᱮᱡ ᱟᱠᱟᱱᱟ, ᱡᱟᱦᱟᱸ ᱫᱚ ᱞᱟᱜᱟᱛᱟᱨ ᱟᱨ ᱡᱤᱣᱤ ᱠᱟᱱᱟ, ᱟᱨ ᱢᱩᱪᱟᱹᱫ ᱨᱩᱯ ᱟᱨ ᱢᱟᱴᱮᱨᱤᱭᱟᱞ ᱵᱟᱪᱷᱚᱱ ᱫᱚ ᱱᱚᱶᱟ ᱠᱚ ᱮᱴᱠᱮᱴᱚᱬ ᱨᱮᱱᱟᱜ ᱩᱠᱩ ᱠᱷᱟᱹᱛᱤᱨ ᱦᱩᱭ ᱟᱠᱟᱱᱟ᱾ ᱚᱨᱡᱚ ᱫᱚ ᱢᱤᱫ ᱥᱚᱨᱮᱥ ᱯᱨᱚᱰᱚᱠᱴ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱢᱩᱪᱟᱹᱫ ᱵᱮᱵᱷᱟᱨᱤᱭᱟᱹ ᱨᱮᱱᱟᱜ ᱫᱤᱱᱟᱹᱢ ᱡᱤᱭᱚᱱ ᱥᱚᱦᱡᱚ ᱵᱮᱱᱟᱣᱟᱭ ᱟᱨ ᱢᱤᱫ ᱵᱩᱴᱤᱠ ᱫᱚᱠᱟᱱ ᱨᱮᱱᱟᱜ ᱪᱚᱨᱚᱠ ᱥᱟᱡᱟᱣ ᱦᱚᱸ ᱠᱟᱱᱟ᱾

ᱢᱟᱱᱟᱱ

A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ

Linap ᱞᱩᱜᱽᱲᱤ ᱞᱟᱴᱷᱟᱹᱣᱜ ᱠᱷᱚᱸᱴᱟ ᱫᱚ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱥᱩᱱᱫᱚᱨ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Linap ᱞᱩᱜᱽᱲᱤ ᱞᱟᱴᱷᱟᱹᱣᱜ ᱠᱷᱚᱸᱴᱟ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾

ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ

ᱯᱨᱮᱥ ᱠᱤᱴ

ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾

ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ: The hanger is made of a linear monolithic aluminum rod - without ties or additional elements, which in turn contributes to its strength, elegant and clean style!
Its advantages over other ordinary hangers are that it prevents stretching of the collars of the clothes, easy and fast placement of pants without wrinkling or falling, with up to 40% lower suspension height and durability, as well as quick and easy production!
ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ: Width 438mm x Depht 8mm x Height 175mm
ᱴᱮᱜ ᱠᱚ: Line, Hanger, Minimal
ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ: By bending aluminum rods according to a template with a diameter of 8 mm
ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ: The main problems were what material to choose, because when bending a hollow tube there was a dent in the inside of the profile and how to make the design so that there are no additional connections on it to make it stable!
ᱜᱚᱵᱮᱥᱚᱱᱟ: Everyday I faced the problem - to hang clothes with a narrow and small hole on a simple hanger. So I started thinking about how I could improve them and at the same time be strong and easy to make. Initially I started searching the Internet for such solutions, but they were difficult to implement and not suitable for pants and others. After inventing the design concept, I started researching the angles and dimensions of the standard hangers, then I drew the design and made real samples. Then I presented it to friends and they approved it from a practical and design point of view.
ᱯᱨᱮᱨᱚᱱᱟ: Due to problems with hanging outerwear and pants on ordinary hangers and their instability over time, also for better visual style
ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ: The project started on August 16, 2020 in Varbitsa, Tushovitsa and ended on January 5, 2021 in Varbitsa, Tushovitsa
ᱠᱟᱹᱢᱤ ᱦᱚᱨ: These holes on the hanger make it easy and fast to hang and insert any garment without stretching or falling.
ᱪᱤᱛᱟᱹᱨ ᱥᱟᱹᱦᱟ: #2-Photographer Ivaylo Sekelariev
#3-Photographer Ivaylo Sekelariev
#4-Photographer Ivaylo Sekelariev
#5-Photographer Ivaylo Sekelariev