Jaroslaw Markowicz ᱨᱮᱱᱟᱜ Etile ᱯᱷᱚᱴᱚᱣᱚᱞᱴᱟᱭᱤᱠ ᱪᱷᱟᱹᱛ ᱛᱟᱭᱤᱞ ᱫᱚ ᱤᱢᱟᱨᱚᱛ ᱠᱚᱢᱯᱚᱱᱮᱱᱴ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2020 A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾
ᱨᱩᱯᱟᱤᱢᱟᱨᱚᱛ ᱠᱚᱢᱯᱚᱱᱮᱱᱴ· 2020
Etile ᱯᱷᱚᱴᱚᱣᱚᱞᱴᱟᱭᱤᱠ ᱪᱷᱟᱹᱛ ᱛᱟᱭᱤᱞ
Jaroslaw Markowicz ᱞᱮᱠᱟᱛᱮ
ᱜᱟᱦᱟᱠ: Electrotile
ᱤᱢᱟᱨᱚᱛ ᱠᱚᱢᱯᱚᱱᱮᱱᱴ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ
ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ
#103293 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪᱰᱤᱡᱟᱭᱤᱱ
Etile ᱯᱷᱚᱴᱚᱣᱚᱞᱴᱟᱭᱤᱠ ᱪᱷᱟᱹᱛ ᱛᱟᱭᱤᱞ ᱵᱟᱵᱚᱛ ᱛᱮ
Etile ᱫᱚ ᱢᱤᱫ ᱯᱷᱚᱴᱚᱣᱚᱞᱴᱟᱭᱤᱠ ᱢᱮᱴᱟᱞ ᱪᱷᱟᱹᱛ ᱛᱟᱭᱤᱞ ᱠᱟᱬᱟ, ᱡᱟᱦᱟᱸ ᱟᱭᱢᱟ ᱫᱷᱚᱨᱚᱬ ᱚᱲᱟᱜ ᱨᱮ ᱵᱮᱵᱷᱟᱨ ᱞᱟᱹᱜᱤᱫ ᱛᱮ ᱛᱮᱭᱟᱨ ᱟᱠᱟᱱᱟ। ᱢᱤᱫ ᱢᱤᱫ ᱢᱚᱰᱭᱩᱞ ᱫᱚ ᱢᱤᱫ ᱯᱩᱨᱟᱹᱱ ᱜᱟᱞᱣᱟᱱᱟᱭᱡᱟᱰ ᱤᱛᱟᱹ ᱪᱷᱟᱹᱛ ᱛᱟᱭᱤᱞ ᱨᱮ ᱟᱫᱷᱟᱨᱟᱠᱟᱱᱟ ᱟᱨ ᱢᱚᱬᱮᱭᱟ ᱢᱟᱭᱠᱨᱚ ᱯᱷᱚᱴᱚᱣᱚᱞᱴᱟᱭᱤᱠ ᱯᱮᱱᱮᱞ ᱮᱢ ᱟᱠᱟᱫᱼᱟ ᱡᱟᱦᱟᱸ ᱵᱤᱡᱩᱞᱤ ᱛᱮᱭᱟᱨ ᱮᱭᱟ। ᱢᱚᱰᱭᱩᱞ ᱠᱚ ᱫᱚ 1200 x 360 x 30 ᱢᱤᱞᱤᱢᱤᱴᱟᱨ ᱢᱟᱲᱟᱝ ᱟᱨ ᱥᱟᱫᱷᱟᱨᱚᱱ ᱪᱷᱟᱹᱛ ᱛᱟᱭᱤᱞ ᱞᱮᱠᱟ ᱢᱤᱫᱟᱱ ᱛᱮ ᱡᱩᱲᱟᱣᱟᱠᱟᱱᱟ, ᱠᱮᱵᱩᱞ ᱡᱩᱲᱟᱣ ᱫᱚ ᱪᱷᱟᱹᱛ ᱥᱤᱛᱷᱤᱝ ᱛᱟᱞᱟ ᱨᱮ ᱩᱠᱩᱟᱠᱟᱱᱟ। ᱯᱟ�mᱟᱨ ᱞᱟᱭᱤᱱ ᱫᱚ ᱚᱲᱟᱜ ᱯᱟᱣᱟᱨ ᱜᱨᱤᱰ ᱥᱟᱶ ᱡᱩᱲᱟᱣᱟᱠᱟᱱᱟ। ᱤᱛᱟᱹ ᱯᱮᱱᱮᱞ ᱫᱚ ᱡᱤᱱᱤᱥ ᱡᱤᱭᱚᱱ ᱢᱩᱪᱟᱹᱫ ᱨᱮ ᱟᱞᱜ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ। Etile ᱫᱚ ᱪᱷᱟᱹᱛ ᱜᱚᱲᱚᱱ ᱵᱟᱝ ᱵᱚᱫᱚᱞ ᱠᱟᱛᱮ ᱚᱡᱚᱛ ᱵᱮᱱᱟᱣ ᱦᱟᱛᱟᱣᱟ।
ᱢᱟᱱᱟᱱ
A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
Etile ᱯᱷᱚᱴᱚᱣᱚᱞᱴᱟᱭᱤᱠ ᱪᱷᱟᱹᱛ ᱛᱟᱭᱤᱞ ᱫᱚ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱥᱩᱱᱫᱚᱨ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Etile ᱯᱷᱚᱴᱚᱣᱚᱞᱴᱟᱭᱤᱠ ᱪᱷᱟᱹᱛ ᱛᱟᱭᱤᱞ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾
ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ
ᱯᱨᱮᱥ ᱠᱤᱴ
ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾
- ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ
- Electrotile is going to offer photovoltaic steel tiles together with the rest of PV equipment and installation service unlike current suppliers of roof integrated PV. The modular, easy-to-use product allows it to be delivered to almost any type of building.
- ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ
- 1200mm x 360mm x 30mm
- ᱴᱮᱜ ᱠᱚ
- Bipv, Photovoltaic, Solar, Solar roof, Green Energy, Architecture
- ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ
- the design of the etile is based on metal roof tiles, a traditional solution based on galvanized steel has created an easily available product. Each individual module has 5 micro photovoltaic panels that generate energy. The steel panel can be easily separated, which is extremely important for the product life cycle.
- ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ
- Our company has been collecting experience in photovoltaics by installing panels on roofs. Most of the insides came from our customers who complained about the poor aesthetics and the mismatch of the size of the panels to the roof. The design challenge was available solutions that would be quick to install, available cheap and aesthetically.
- ᱜᱚᱵᱮᱥᱚᱱᱟ
- the roofing sheet project was a research and development project during which many tests were carried out. During the design process, we were testing various panel sizes, material connectrions and overal look of product on the building.
- ᱯᱨᱮᱨᱚᱱᱟ
- Traditional photovoltaic panels often look unsightly on the building, their large size does not allow for an exact fit to the roof body. We wanted to propose a solution which would look good on the building and not stand out from traditional roof tiles.
- ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ
- the project was developed in Warsaw. Conceptual work lasted from september 2016. After many prototypes and tests, the project was finally implemented in January 2020.
- ᱠᱟᱹᱢᱤ ᱦᱚᱨ
- The modules are connected together in the same way as ordinary roof tiles. The only element distinguishing Etile are cable connections, which are hidden under the roof sheathing. As in the case of a solar installation, the power line is connected to the home power grid.
- ᱴᱤᱢ ᱥᱮᱫᱟᱭ ᱠᱚ
- Paweł Wujek
Daniel Ziomek
ᱥᱯᱚᱱᱥᱚᱨᱰ
Designers.org ᱠᱷᱚᱱ ᱯᱟᱨᱚᱢ ᱛᱟᱞᱟᱥ
ᱟᱞᱮᱭᱟᱜ ᱵᱤᱜᱽᱭᱟᱯᱚᱱ ᱥᱟᱹᱜᱟᱹᱭ ᱠᱚ ᱠᱷᱚᱱ ᱯᱨᱚᱰᱟᱠᱴ, ᱥᱮᱵᱟ ᱟᱨ ᱢᱚᱠᱟ ᱩᱫᱩᱜ ᱢᱮ᱾
ᱟᱨᱦᱚᱸ ᱠᱷᱚᱡ ᱢᱮ
ᱥᱟᱹᱜᱟᱹᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ
ᱢᱤᱫ ᱞᱮᱠᱟ ᱠᱮᱴᱮᱜᱚᱨᱤ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱯᱩᱨᱥᱠᱟᱨ ᱧᱟᱢᱟᱠᱟᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱧᱮᱞ ᱢᱮ, ᱡᱚᱜᱭᱟᱛᱟ ᱧᱮᱞ ᱛᱮ ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱᱟ᱾
