Saltar para o conteúdo
75ft Explorer Iate à Vela por Harry Miesbauer

O design 75ft Explorer Iate à Vela por Harry Miesbauer é um vencedor altamente estimado do prestigioso 2023 A' Design Award de Ferro na Categoria de Competição Design de Iates e Embarcações.


FerroIate· 2023

75ft Explorer Iate à Vela

por Harry Miesbauer

Cliente: Harry Miesbauer Yacht Design

Vencedor do A' Design Award de Ferro na Categoria Iate

54,264

Vencedor de Prémio Verificado

Verificar Estado do Prémio para #150186

Cores

O Design

Sobre 75ft Explorer Iate à Vela

O iate foi projetado para um proprietário muito experiente, que deseja ir com o iate a qualquer lugar possível da Terra. Isso significa também muito ao norte, até o Alasca. Por isso, foi dada grande ênfase para que o iate possa também ser navegado em áreas com baixas temperaturas, mesmo abaixo de zero. O iate apresenta uma capota rígida para maior proteção no cockpit durante a navegação, e um sistema de propulsão híbrido foi desenvolvido para o iate, primeiramente para reduzir as emissões e, em segundo lugar, para que o iate possa também entrar em áreas ambientalmente protegidas.

O Reconhecimento

Sobre o A' Design Award de Ferro

75ft Explorer Iate à Vela conquistou o A' Design Award de Ferro, um reconhecimento prestigiado atribuído a bons designs que cumprem os requisitos profissionais e industriais esperados de criações bem concebidas. Os vencedores do Ferro demonstram grande habilidade, elevada especialização, compreensão especializada e capacidade criativa dos seus criadores. Espera-se que 75ft Explorer Iate à Vela seja uma criação muito considerada, admirada e estimada, prática e inovadora. Este design vencedor do A' Design Award de Ferro integra as melhores práticas do setor e tem características técnicas competentes associadas a conhecimento especializado e talento. Pela sua minúcia, 75ft Explorer Iate à Vela merece respeito e destina-se a proporcionar melhorias na qualidade de vida que ajudam a tornar o mundo num lugar melhor.

Por Trás do Design

Kit de Imprensa

Créditos, membros da equipa e detalhes técnicos fornecidos pelo designer.

Propriedades Únicas
The yacht was designed for a very experienced owner, who wants to go with the yacht to every place on the earth. In other words, the yacht is designed for a temperature range from -15° C to 40° C, and will sail from the Mediterranean sea, over the Atlantic up north, even up that Alaska. A lot of development went into the seaworthiness of the yacht, and special care has been taken that the crew is well-protected, either outside in the cockpit, as well inside from the cold temperatures which the yacht will face during her journeys. For this the yacht features a special rigid sprayhood. To reduce emissions, lot of development went into the yacht's fully hybrid propulsion system, as the boat will be operated also in environmentally protected areas.
Dimensões e Embalagem
Length over all 23.100m / Beam max 5.850m / Displacement ca.39.000kg @ measurement trim / draft 4.200 - 2.600 m with lifting keel / sail area 299.1m2 (upwind)
Etiquetas
yacht design, sailing yacht, explorer, cruiser
Tecnologia de Produção
Hybrid Glass/Carbon-sandwich construction,
carbon mast,
rod rigging,
CNC milled high strength steel fin
Lifting keel
Desafio de Design
The fact that the yacht will be operated by temperatures below zero, and icing could therefore be an issue.
This has imposed certain design limits which had to be solved in the overall aesthetics.
Pesquisa
- 10 different hull shapes were studied to optimise the boat for high stability and good seaworthiness
- a detailed weight estimate was made, from which areas of weight savings could have been established and further weight reduction was achieved by using carbon in the hull, deck and structures.
- detailed studies were carried out how the boat can be handled in cold climate, and which protection are needed to sail in temperatures below zero
- performance parameters were optimised for the wind and sea conditions which are expected on the open sea
- test are currently made for the sail material if it withstands temperatures below zero
- further studies of the deck layout and deck ergonomics were carried out to optimise the yacht also when used by a small crew
- a special tender launching and loading system was to developed in order that the tender can be operated by one person only.
- studies were made in order that boat can dryfall in areas with big tidal ranges
Inspiração
The sea is the last bit on earth where you can experience real freedom, was the main idea which has been followed on this design. Where the exterior styling should reflect in a way the rough and harsh environment which will experience the yacht in its operational life, yet it should be elegant and timeless with well- balanced proportions, but really functional. On the other hand the interior should give you the warmness and cosiness and a feeling of protection when you are going in the areas where you will have to face rough conditions.
Duração do Projeto
The concept design started in summer 2019, preliminary design was finalised 2022, and the project is now ready for building.
The boat yard will be chosen by the owner before May 2023
Fluxo de Operação
The cockpit is designed with a well-protected area, especially for sailing long offshore passages during night. The navigation area is located close to the companionway in order that the watch captain is quickly at the steering area and can interfere if needed. the yacht can be steered also from the navigation area with a joystick. All winches for the sail control are grouped beside or in front of the steering wheels, in order that the helmsman can sail the yacht alone from the steering area once the sails are hoisted.
As the owner will stay on board for long periods, the yacht features also an office area where he can do his day to day business.
The yacht meets all requirements for the ISO standards, to withstand also high waves on the oceans and is classified for operating on the open sea without any limits.
Créditos de Imagem
renderings: Harry Miesbauer Yacht Design

Patrocinado

Explore Para Além do Designers.org

Descubra produtos, serviços e oportunidades dos nossos parceiros publicitários.

O Bom Design Merece Grande Reconhecimento

O A' Design Award é uma distinção internacional, com júri, para o bom design. Participe no A' Design Award para ter a oportunidade de obter reconhecimento meritocrático, conquistar fama, prestígio e visibilidade para o seu trabalho. Nomeie o seu trabalho para o A' Design Award e concorra ao cobiçado A' Design Prize.

Nomear