O design Bend Mesa De Centro por Jan Goderis é um vencedor altamente estimado do prestigioso 2023 A' Design Award de Bronze na Categoria de Competição Design de Mobiliário.

BronzeMobiliário· 2023

Bend Mesa De Centro

por Jan Goderis

Vencedor do A' Design Award de Bronze na Categoria Mobiliário

15,355

Vencedor de Prémio Verificado

Verificar Estado do Prémio para #148865

Visitar Site Ver no A' Design Award Comunicado de Imprensa Selo do Prémio

Cores

O Design

Sobre Bend Mesa De Centro

A mesa é feita de duas placas de alumínio dobradas que se encaixam. Quando montadas, as placas estendem-se até às pernas. Isso confere certa transparência e leveza ao design e cria-se armazenamento vertical para revistas, jornais e xadrez. Entre as duas placas superiores existe também a possibilidade de arrumação em ambos os lados da mesa.

O Reconhecimento

Sobre o A' Design Award de Bronze

Bend Mesa De Centro conquistou o A' Design Award de Bronze, um reconhecimento altamente prestigiado atribuído a designs notáveis que se distinguem pela criatividade, engenho e perspicácia. Os vencedores do Bronze são artefactos amplamente habilidosos e surpreendentemente criativos que comprovam a vasta experiência, imaginação e capacidade de iniciativa dos seus designers. Espera-se que Bend Mesa De Centro seja um objeto muito considerado, admirado e estimado, notavelmente profissional e inovador. Este design vencedor do A' Design Award de Bronze incorpora as melhores práticas em arte, ciência, design e tecnologia e é excelente pela sua atenção ao detalhe. Bend Mesa De Centro satisfaz esplendidamente necessidades, toca desejos, encanta sentimentos e desperta curiosidade.

Por Trás do Design

Kit de Imprensa

Créditos, membros da equipa e detalhes técnicos fornecidos pelo designer.

Propriedades Únicas: The table is made of two bent aluminium plates which fit together. When put together, the plates extend all the way to the legs. This gives a certain transparency and lightness to the design and vertical storage is created for magazines, newspapers, and plaid... In between the two top plates, there is also the possibility of storage on both sides of the table.
Dimensões e Embalagem: Dimensions: 125 x 55 x 28 cm
Etiquetas: coffee table, folded table, ecological design, functional design, minimal design
Tecnologia de Produção: Made of 2 parts pleated aluminum sheets (lower and upper parts) finished with a more environmentally friendly lacquering process. Oak wood slats to join the 2 aluminum plates together.
Desafio de Design: The design started in 2017. It consisted only of 1 pleated non-continuous line with only the pleated legs and the laying surface. To prevent the folding of the laying surface under load, reinforcement surfaces were provided at the bottom and between the supports, but they were very distracting. It wasn't until 2022 that the idea of using a continuous pleated line with a continuous top surface between which invisible wooden beams could be provided for strength and to invisibly connect the bottom and top. Using a continuous line only made the design more visually logical and aesthetic.
Pesquisa: The basis of the design is a smooth continuous line. When folding certain parts, cracks appeared. This was solved by choosing a different aluminium alloy and heating it when folding. It also sought to split the table into two parts so that it could be easily assembled and transportable. By making a separate top and bottom top, with a connection joint on the sides, and fitting together with invisible pins. For the top, two wooden beams are glued in the middle. Both parts are invisibly connected at the bottom with a few screws.
Inspiração: The inspiration was very basic. From the idea of creating a flowing 2-dimensional line design to a 3-dimensional table that can be made out of 1 sheet, metal or wood. And where the shape of the line can incorporate the essential elements for a coffee table, namely an outlet, supports (legs) and storage without becoming banal. Translated from an ordinary continuous line. The fluid continuous line gives a sculptural aspect to the table, which is in dialogue with its surrounding and user.
Duração do Projeto: The design started in 2017 and finalized in 2022. Both in Ghent, Belgium.
Fluxo de Operação: The pleated plate provides continuous support for the table and also provides storage in the legs and the space between the bottom and top.
Patentes: e-depot: 000595853
Membros da Equipa: Jan Goderis
Créditos de Imagem: #1 photographer Jan Goderis, 2022
#2 photographer Jan Goderis, 2022
#3 photographer Jan Goderis, 2022
#4 photographer Sonny Plasschaert, 2022
#5 photographer Jan Goderis, 2022