Rockit Balançador para Carrinho de Bebê por Rockit Design Team

O design Rockit Balançador para Carrinho de Bebê por Rockit Design Team é um vencedor altamente estimado do prestigioso 2021 A' Design Award de Prata na Categoria de Competição Design de Produtos para Bebés, Crianças e Jovens.

PrataProdutos para Bebés· 2021

Rockit Balançador para Carrinho de Bebê

por Rockit Design Team

Cliente: Rockit

Vencedor do A' Design Award de Prata na Categoria Produtos para Bebés

32,679

Vencedor de Prémio Verificado

Verificar Estado do Prémio para #123449

Visitar Site Ver no A' Design Award Comunicado de Imprensa Selo do Prémio

Cores

O Design

Sobre Rockit Balançador para Carrinho de Bebê

O Rockit é um balançador compacto que se acopla a um carrinho de bebê e o embala suavemente para acalmar os bebês até que adormeçam. O Rockit utiliza um sistema de fixação em duas partes: um suporte é instalado na parte alta da estrutura do carrinho e o dispositivo encaixa nesse suporte quando necessário. O dispositivo pode ser transferido para outro carrinho ou guardado quando não estiver em uso. Um botão de pressão liga o Rockit e um seletor de velocidade ajusta a vibração à frequência de ressonância da estrutura, proporcionando um balanço suave de baixa frequência. Os testes demonstram que o movimento é comparável ao embalar manual. A maioria das peças é moldada por injeção em ABS, com sobremoldagens em TPR.

O Reconhecimento

Sobre o A' Design Award de Prata

Rockit Balançador para Carrinho de Bebê conquistou o A' Design Award de Prata, um reconhecimento extraordinariamente prestigiado atribuído a designs de topo de gama, deslumbrantes e impressionantes. Os vencedores da Prata são obras tremendamente brilhantes e extremamente criativas que ilustram a perícia, o talento e a acuidade excecionais dos seus designers. Espera-se que Rockit Balançador para Carrinho de Bebê seja uma obra maravilhosa e de referência, notavelmente profissional e profundamente inovadora. Este design vencedor do A' Design Award de Prata é uma invenção muito notável e admirada, que beneficia e faz avançar as fronteiras da arte, da ciência, do design e da tecnologia. Rockit Balançador para Carrinho de Bebê é uma criação imensamente invejada que desperta desejos, traz sentimentos positivos e faz nascer espanto e deslumbramento.

Por Trás do Design

Kit de Imprensa

Créditos, membros da equipa e detalhes técnicos fornecidos pelo designer.

Propriedades Únicas: Rockit attaches to any pram or stroller and gently rocks to soothe babies to sleep. There is nothing quite like Rockit on the market, with other solutions being large mains operated platforms that you wheel the stroller onto. Rockit is attached to the stroller using a 2-fix system meaning it can easily be switched to another stroller or safely stored when not in use. The speed control allows you to tune the Rockit to the resonant frequency of any pram or stroller to achieve the perfect rock that makes the baby believe they are still being pushed along.
Dimensões e Embalagem: 85mm x 95mm x 155mm
Etiquetas: stroller rocker, baby sleep-aid, pram rocker, baby sleep aid, portable baby rocker, pushchair rocker
Tecnologia de Produção: With the design making use of a spinning eccentric weight, early development work focused on testing the optimum mass and distance from the motor spindle. This was combined with testing the RPM of the motor to achieve a gently low frequency rock when fitted to a variety of stroller weights and sizes. Developing a system to start the heavy weight spinning even when mounted horizontally was also important. Regarding production, the majority of parts are injection moulded in ABS with some having TPR over-moulds.
Desafio de Design: The main creative challenge was getting the branding and styling of the product right. The design team wanted the product to stand out in the nursery sector as many nursery products are very ‘twee’ or can look quite medical in appearance. It was important that the product looked nurturing and not too toy-like. Because the product would be on display when in use we wanted it to attract attention and act as a advertisement, hence the strong Rockit branding.
Pesquisa: Quantitative research to measure levels of vibration acting on a stroller when rocked by Rockit, by hand and by wheeling over paving stones. Objective was to ensure acceleration measurements were comparable and within expected limits. Measurements were undertaken using 2 different accelerometers fixed to the stroller in a variety of positions. It was found that moving the stroller over paving stones, resulted in significantly higher levels of acceleration than those generated by Rockit and that rocking the stroller by hand was approximately comparable in each of the measurements.
Inspiração: Dr. Nick Webb invented Rockit when his three month old daughter refused to sleep in her stroller unless she was being pushed along. He noticed this problem affected other parents and using his knowledge of vibration and acoustics constructed a simple prototype. He tested it the next day and Abby remained asleep even when the stroller came to a halt. Nick set about developing and refining it with his co-founder Matt Dyson. Over the next year they turned the prototype into a marketable product.
Duração do Projeto: The project was started in Bristol, UK in late 2015. The initial concept won a Design Council Spark Award in London during September 2016. The first production samples were exhibited at the Kind und Jugend Nursery Show in the Cologne in September 2017. The Rockit was launched to market in November 2017.
Fluxo de Operação: Rockit is attached to the stroller using a 2-fix system. The bracket is attached high up on the stroller frame first and the Rockit can then be clipped into the bracket when needed. This also means it can be switched to another stroller or safely stored when not in use. The Rockit is turned on using a push switch and the speed is then adjusted using a speed dial. This adjustment allows the user to tune the vibrations to the resonant frequency of the stroller giving a gentle low frequency rock.
Patentes: Patent pending. Patent number GB1705215.0. Patent holders N2M Ltd. Year 2017
UK Trademark UK00003148555. Year 2016. Trademark holder N2M Ltd.
Other trademarks: USA 88272320 and 5289937. EU 88272320. Australia 1879106. Canada 1863104. Japan 6158102. New Zealand 1081472. China 21004784. Israel 305973. South Korea 4015283950000. Russia 2019708217. Taiwan 01977936.
Registered Design / Design Patents: EU 003376920-0001. Canada 176798. USA USD845181S.
Membros da Equipa: Dr. Nick Webb
Matt Dyson
Matt Sparrow
Gary Pyper
Créditos de Imagem: All images. Chris Rickman, photographer, 2017
Video Credits: Barry Wilkinson, 2017