SS2019 Splash Silicone Rubber Clothing Vestuário de Moda por Viktoria Marchev

O design SS2019 Splash Silicone Rubber Clothing Vestuário de Moda por Viktoria Marchev é um vencedor altamente estimado do prestigioso 2021 A' Design Award de Prata na Categoria de Competição Design de Moda, Vestuário e Indumentária.

PrataModa· 2021

SS2019 Splash Silicone Rubber Clothing Vestuário de Moda

por Viktoria Marchev

Cliente: Viktoria Marchev

Vencedor do A' Design Award de Prata na Categoria Moda

64,942

Vencedor de Prémio Verificado

Verificar Estado do Prémio para #110147

Visitar Site Ver no A' Design Award Comunicado de Imprensa Selo do Prémio

Cores

O Design

Sobre SS2019 Splash Silicone Rubber Clothing Vestuário de Moda

'Splash' é uma coleção feita de borracha de silicone, um material versátil que a designer vem utilizando para criar seus conceitos de ambientação sci-fi desde 2014. A designer desenvolveu uma tecnologia especial de moldagem e fundição para construir suas peças de silicone. As peças criadas são altamente sustentáveis, pois não há desperdício durante o processo criativo, e também são impermeáveis e fáceis de limpar. O título 'splash' refere-se à tecnologia, que envolve a injeção de água entre camadas de silicone.

O Reconhecimento

Sobre o A' Design Award de Prata

SS2019 Splash Silicone Rubber Clothing Vestuário de Moda conquistou o A' Design Award de Prata, um reconhecimento extraordinariamente prestigiado atribuído a designs de topo de gama, deslumbrantes e impressionantes. Os vencedores da Prata são obras tremendamente brilhantes e extremamente criativas que ilustram a perícia, o talento e a acuidade excecionais dos seus designers. Espera-se que SS2019 Splash Silicone Rubber Clothing Vestuário de Moda seja uma obra maravilhosa e de referência, notavelmente profissional e profundamente inovadora. Este design vencedor do A' Design Award de Prata é uma invenção muito notável e admirada, que beneficia e faz avançar as fronteiras da arte, da ciência, do design e da tecnologia. SS2019 Splash Silicone Rubber Clothing Vestuário de Moda é uma criação imensamente invejada que desperta desejos, traz sentimentos positivos e faz nascer espanto e deslumbramento.

Por Trás do Design

Kit de Imprensa

Créditos, membros da equipa e detalhes técnicos fornecidos pelo designer.

Propriedades Únicas: The designer has been experimenting with silicone rubber since 2014. The molding-casting technology requires precise preparation, the emphasis is more on the design process, as the making itself is limited to the time of pouring. Splash is an advanced version of the Spring-Summer 2015 Clones, which earned the designer the category of innovative designers on Not Just A Label. The title Splash refers to the technology which involves liquid being injected between layers of silicone.
Dimensões e Embalagem: There are 18 looks within the collection, sizes ranging from bodysuits, short dresses and one long dress.
Bodysuits: Body length: 60 cm, bust: 70 cm, waist: 60 cm, weight: 4 lb,
Short dress: Length: 70 cm, bust: 70 cm, waist: 60 cm, hips: 80 cm, weight: 4 lb
Yellow dress: Overall length: 135 cm, bust: 70 cm, waist: 60 cm, hips: 80 cm, weight: 14 lb
Etiquetas: fashion, apparel silicone, rubber, innovation, sci-fi
Tecnologia de Produção: Silicone rubber
Molding-casting
Pouring
Desafio de Design: After several years of experimentation mostly on swimwear, one of the biggest challenges in this collection was to make a big-scale piece. An attractive yellow dress with a huge round skirt and circle "cutouts". The designer faced the challenge to find balance between strength and fragility. Because of the shortness of the curing time of silicone rubber and the size of the project the design itself needed a lot of attention as minor mistakes could result in repeating the whole making process.
Pesquisa: The designer has been experimenting with silicone rubber for a couple of collections (5 silicone rubber collections so far), trying something new each season to come. Innovations in each collection:

SS2015 Clones - first silicone rubber collection - the foundation of the technology
SS2017 Skin Deep - introducing transparent hard silicone vests
FW2017 In the cocoon - expanding the volume to big-scale pieces
SS2018 Splash - injecting water between layers of silicone to create the ‘splash’ effect
FW2019 Possession - complete, multiple-piece outfits made of silicone rubber, including footwear
Inspiração: The designer loves to define garments as an abstract extension of the human body. For this particular collection the designer drew inspiration from her personal experiences learning about the importance of water within the healthy functioning of the body, how it impacts blood structure. She expressed it in two ways: using circles and injecting water and other colorful liquids between layers of silicone as a symbolic representation of this healthy flow.
Duração do Projeto: The development of the technology started in 2014 with the designer's first silicone rubber collection Spring-Summer 2015 Clones and has been upgraded every year. Splash conceived in 2018 and was completed in August, 2018 and was showcased at New York Fashion Week in the framework of Oxford Fashion Studio's Emerging Designer Showcase in September at Pier59 Studios.
Fluxo de Operação: The pieces made of silicone rubber do not require any sewing, therefore there are no real seams or trimmings, which creates a very neat appearance. The pieces are simultaneously flexible and have a strong hold, which feature eliminates wrinkles. The cleaning of the pieces is highly-efficient as the surface is waterproof, they don't require machine wash, can be wiped off with light detergents, alcohol for disinfection and can be patted dry with paper towel or any water absorbent cloth. The same way the pouring process allows no waste during the production as there is no excess material in the mold.
Patentes: Patent No.
Membros da Equipa: Viktoria Marchev (Viktoria Tisza at the time of the creation)
Créditos de Imagem: Runway photography and videography: Oxford Fashion Studio
Main image photography: Charles Hundley, The Runway Authority
Runway model for main image: Dani Le Rose/Dani Rook
Runway model for Optional Image #1: Hanasha Ch.
Runway model for Optional Image #2: Tifannie Kramer
Runway model for Optional Image #3: Stephanie Bardavid
Runway model for Optional Image #4: Mimi Tao

Additional documentation - Campaign
Photography: Dobrin Marchev www.dobrinmarchev.com
Model: Ana Eberg @Red Model Management
Make-up: Anastasia Eisenberg