Lo dissènh Planck Taula bassa per Kristof De Bock es un laureat autfo estimfo del prestigfo 2020 A' Design Award d'Aur dins la Categoria de Competfo Dissènh de Mobilièr.

AurMobilièr· 2020

Planck Taula bassa

per Kristof De Bock

Client : Dasein Products

Laureat del A' Design Award d'Aur dins la Categoria Mobilièr

62,500

Laureat de Prèmi Verificat

Verificar l'Estat del Prèmi per #93711

Visitar lo site Veire a A' Design Award Comunicat de premsa Insígnia del prèmi

Colors

Lo Concèpte

A prepaus de Planck Taula bassa

La taula es fabricada de diferentas pèças de contraplacat encoladas ensems jos pression. Las superfícies son ponçadas e tractadas amb un varnís mat e plan resistant. I a 2 nivèls - estant donat que l'interior de la taula es void - çò qu'es plan practic per i pausar de revistas o de plaids. Dejós la taula i a de rodetas integratas. Aital l'espaci entre lo sòl e la taula es plan pichon, mas al meteis temps, es facila de desplaçar. La manièra que lo contraplacat es utilizat (verticalament) la rend plan resistent.

La Reconoissença

A prepaus del A' Design Award d'Aur

Planck Taula bassa a ganhat la distincion A' Design Award d'Aur, una reconeissença immensament prestigiosa acordada a de designs de primièra qualitat, meravilhoses e excellents. Los ganhaires de l'Aur son de creacions extrèmament innovantas, visionàrias e esbleugissentas, que reflectisson lo prodigi, la sabença e la proeça de lors designers. S'espèra que Planck Taula bassa siá una invencion fòrça lausada, que dintra de tendéncias e monumentala, que provesís un valor sens precedent. Aqueste design ganhaire de la distincion A' Design Award d'Aur es un projècte espectaclós e respectat, que fa un grand ben e fa avançar las frontièras de l'art, de la sciéncia, del design e de la tecnologia. Planck Taula bassa crea de sentiments intensos de desirs, evòca la passion, encoratja la creativitat e fascina.

Darrièr lo concèpte

Kit de premsa

Crèdits, membres de l'equipa e detalhs tecnics fornits pel designer.

Proprietats Unicas: Dasein products was looking to come up with an unique coffee table. Different in form and materials. They choose plywood but used it in an unconventional way by bonding it together on the flat sides. This gave the possibility to make a robust and elegant looking object at the same time. Seen from the sides one sets eyes on a block of wood, seen from the fronts, one looks at an elegant, 2-level object. Due to the strength of the material, the thickness of the levels can be reduced to a thin line.
Dimensions e Embalatge: Width 75 cm x Depth 46 cm x Height 30 cm
Etiquetas: Objectdesign, coffeetable, furniture, living room
Tecnologia de Produccion: The table is made of several pieces of polish pine plywood that are prepared with a CNC cutter. Once they are connected with glue and kept under high pressure for at least 12 hours, they require intense sandpapering and varnishing.

At the bottom, holes are drilled for the bullet wheels that need to be glued in.
Desaffo de Dissènh: The biggest challenge for this project was to come up with a unique concept that has an esthetic added value but is still functional. Dasein Products has chosen to make a rather small coffee table that is very easy movable. It can be used to store plaids, books, etc. so it looks neat at the sam time.
Recèrca: The object is designed with the golden ratio in mind. Seen both from top as from short sides, these proportions are respected for the wooden part.

The 2 horizontal layers where intended to be thin but strong. They are narrowed down to 17mm and still a full grown man can stand on the middle of the table.

A lot of time was spend on finding the bullet wheels. Metal wheels are strongest, but make a lot of noise on a stone floor. So the designer came up with small nylon wheels, but lots of them. In total 16 are placed under each table.
Inspiracion: Above all, furniture should be functional. The challenge was to create a coffee table that was different then others, esthetic and functional. With these goals in mind, the designer explored different materials.
Durada del Projècte: The basic idea came early summer of 2019. It took some time to get the details straight in the workshop in Ronse (Belgium) but in the beginning of September the coffee table was presented to the world.
Flux Operacional: The table is fairly small and movable. The idea is to eliminate the big center piece table, but place (more than one) in the living room that can be moved to where it is needed.
Membres de l'Equipa: Kristof De Bock
Crèdits d'Imatges: Photograper Pieter Gregoire