Vista EY2T Camèra Motorizada d'Identificacion Biometrica per Chris Dopp & Travis Baldwin

Lo dissènh Vista EY2T Camèra Motorizada d'Identificacion Biometrica per Chris Dopp & Travis Baldwin es un laureat autfo estimfo del prestigfo 2015 A' Design Award d'Argent dins la Categoria de Competfo Productes de Seguretat.

ArgentProductes de Seguretat· 2015

Vista EY2T Camèra Motorizada d'Identificacion Biometrica

per Chris Dopp & Travis Baldwin

Client : Vista Imaging and Crea Inc Design LTD

Laureat del A' Design Award d'Argent dins la Categoria Productes de Seguretat

25,961

Laureat de Prèmi Verificat

Verificar l'Estat del Prèmi per #40052

Visitar lo site Veire a A' Design Award Comunicat de premsa Insígnia del prèmi

Colors

Lo Concèpte

A prepaus de Vista EY2T Camèra Motorizada d'Identificacion Biometrica

Vista EY2T es una camèra motorizada d'identificacion biometrica per la reconeissença de l'iris e del visatge. L'aparelh explora lo camp de visión per detectar de visatges, puèi de motors fan virar la camèra per la visar sus los uèlhs. Un large espandiment de LED infrarojas e un sistèma d'autofocus permeton la captura a una distància de 3 a 6 pès, de sòrta que cap de mira manuala es pas necessària. Nòu captors frontals son unificats darrièr una sola fàcia negra, e la forma cilindrica en pichòta pastilha amb las extremitats arredonidas crea una forma calma e non menaçanta. La camèra pòt èsser utilizada de manièra autonòma o amb un supòrt mural.

La Reconoissença

A prepaus del A' Design Award d'Argent

Vista EY2T Camèra Motorizada d'Identificacion Biometrica a ganhat la distincion A' Design Award d'Argent, una reconeissença extraordinàriament prestigiosa acordada a de designs d'ort de gamma, esplendids e impressionants. Los ganhaires de l'Argent son d'òbras terriblament brilhantas e extrèmament creativas que illustran l'experiéncia, lo talent e la finessa excepcionals de lors designers. S'espèra que Vista EY2T Camèra Motorizada d'Identificacion Biometrica siá una òbra meravilhosa e de referéncia, notablament professionala e prigondament innovanta. Aqueste design ganhaire de la distincion A' Design Award d'Argent es una invencion fòrça notabla e admirada, que fa un ben e fa avançar las frontièras de l'art, de la sciéncia, del design e de la tecnologia. Vista EY2T Camèra Motorizada d'Identificacion Biometrica es una creacion immensament envejada que desrevelha de desirs, aduch de sentiments positius e fa néisser l'estonament e l'esmaiment.

Darrièr lo concèpte

Kit de premsa

Crèdits, membres de l'equipa e detalhs tecnics fornits pel designer.

Proprietats Unicas: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Dimensions e Embalatge: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Etiquetas: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Tecnologia de Produccion: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Desaffo de Dissènh: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Recèrca: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Inspiracion: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Durada del Projècte: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Flux Operacional: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Membres de l'Equipa: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Crèdits d'Imatges: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015