Decker Icpalli Malinqui ītēchcopa Cameron Smith

Tlanāhuatīlli Decker Icpalli Malinqui ītēchcopa Cameron Smith cē cencā mahuizzō tēmacēhualōni īpan huēyi 2022 Mahuizolli A' Design Award Tepoztli īpan Caltlapechtli Tlachihchihualiztli Nēhuilīztli Tlamantli.

TepoztliCaltlapechtli· 2022

Decker Icpalli Malinqui

īpal Cameron Smith

Tlanāhuatīlli: Furniture Smith

Mahuizolli A' Design Award Tepoztli Tēmacēhualōni īpan Caltlapechtli Tlamantli

10,965

Tlaneltīlīlli Tēmacēhualōni

Xictlaneltilia Tēmacēhualli ītēchcopa #137461

Xiquitta Tlahcuilōlcalli Xiquitta A' Design Award ītechcopa Āmatl Tēmachiyōtīliztli Tlamachiōtl

Tlapalli

Tlanēxtilistli

Ītechcopa Decker Icpalli Malinqui

Decker in icpalli malinqui in mochīhua īpampa itech ācalli huēyāc (yacht) monequi. In icpalli mopohua iuhquin icpalli pachtic ihuān mocecuiliā ic mochīhua patlāhuac zan 100 millimetros in ic pachtic. In cuauhyoyoh mochīhua ītech tepoztli acic amo mopalāniz (stainless steel), īhuān oncah octacatl trapezoidal ihuān tlapechtli tepoztli tzoyōnīlli, mopantlazah ītech teocuitlatl coztic (brass) īn campa molinia. In huapalmeh teca (teak) mopilhuiah ītech mecatl patlāhuac, ahmo ītech in cuauhyoyoh, ic in icpalpechtli ihuān icuitlapan huel molinia īhuān in tlācatl motēca. Cē tlachīhualli malinqui (over-centre geometry) quipiya in mecameh melāhuac īhuīc pahtia in icpalli pohuīlo. Cē tlachiyaliztli ītech in icpalpechtli mochīhua iuhqui mātzitzquiliztli, ihuān tepoztetl huālnamictīlli (magnets) quimopiyah in icxitl cecuiliuhqui in mā ahmo molīni.

Tēixīmachōtiliztli

Ītechcopa Mahuizolli A' Design Award Tepoztli

Decker Icpalli Malinqui ca in quicuic in Mahuizolli A' Design Award Tepoztli, tlamahuizoliztli tlen momaca in cualli dizayno in quitlalia in tlen monequi ipan tequitl ihuan tlachihualiztli in quimaca in cualli tlachihualli. In quicuicah Tepoztli quinextia in hueyi tlamatiliztli, toltecayotl ihuan ihuelitiliztli intlachihuanime. Ca quinequi in Decker Icpalli Malinqui ca tlazohtli, mahuiztic, yancuic ihuan motequiuhtia. Ni dizayno in quicuic Tepoztli quihuelitia in tlamatiliztli ihuan quipia chicahualiztli tlen tepoztli. Decker Icpalli Malinqui quicualtia in nemiliztli ihuan quihuelitia in cemanahuac ica cualli.

Tlanēxtilistli Ītēixpan

Āmatl Tlanextīliztli

Tlapōhualli, tēquitqueh īwan tēchmachilīztli ōquinmaca in tlanēxtīlīlli.

Cē Zan Ītēchcopa: Inspired by the need for quality compact furniture on yachts, the Decker folding yacht chair easily folds from a lounge chair to a compact form factor. Teak wood slats are secured to webbing straps rather than the stainless steel frame to provide flex and added comfort in the seat. A jog in the seat frame creates a handle when folded and allows the needed geometry for an over center design that keeps the webbing in tension and the backrest open while in use.

The teak seat and back slats are secured to webbing straps that run from the front of the seat to the top of the back. When unfolded, the unique over-center design provides tension on the straps holding the teak seat and back. The straps provide a secure seat that flexes and gives with the user.
Huēyiliztli īhuān Tlacualtepēhualli: Open
660 mm wide x 730 mm deep x 673 mm tall
26” wide x 28.75” deep x 26.5” tall

Folded
660 mm wide x 570 mm deep x 100 mm thick
26” wide x 22.5” deep x 4” tall
Tōcāitl: folding chair, yacht chair
Tlachīhualiztli Māchiyōtl: Materials common in yachts such as stainless steel, brass and teak are used in the Decker chair. The stainless steel frame is fabricated with trapezoidal tubing and cast lugs. The tubing and lugs are welded and finished to create a seamless frame. Brass hardware is used for pivot joints and fastening hardware. An optional pad with outdoor fabric withstands the elements encountered by yachts.
Tlanāhuatīlli Nētēcahuilīztli: The chair has a simple design, yet there were several challenges in the design. Creating tension in the webbing and teak slats through the over center design of the backrest required multiple prototypes and webbing materials to be tested. The simplicity of the pivots required design iterations to create surfaces that interact with each other while the chair was open and closed. These simple details become the highlight of the chair.
Tlatēmōliztli: A lower lounge chair was selected to aid the ability to fold and nest shorter legs. An ergonomic model was created that allowed for adjustment of the angle and height of the seat and back.. Adjusting the angles and length of the components allowed for the geometry to be tested by various users for maximum comfort.
Tēyōllālīliztli: There is not a lot of room on yachts, but they maintain a high desire to have flexible furniture that can be easily stowed when not in use. Plastic chairs or bulky furniture aren't at home on expensive yachts. The Decker folding yacht chair can be used on deck and easily stowed when needed.
Tēquitl Cāhuitl: Design completed January 2022 with prototype units completed March 2022 in Seattle, Washington USA.
Tēquitl Ōhuitl: The folding chair is simple to use. To close the chair simply flip the backrest down onto the seat. The teak slats relax when folded as the webbing is no longer under tension. With the backrest folded, the chair can be picked up by the handle on the back of the seat frame. The front legs are then folded followed by the back legs. The legs are held in place by magnets embedded inside the tubing.

The same process is used to unfold the chair. First the legs are unfolded and the chair placed on the legs. The backrest is opened and the teak slats are tightened with the webbing is tightened.
Calpolli Tlācah: Cameron Smith
Adam Smith
Īxiptla Tlanēxtīlli: photo - Cameron Smith