Planck Tabella Tal-Kafè minn Kristof De Bock

Id-disinn Planck Tabella Tal-Kafè minn Kristof De Bock huwa rebbieħ stmat ħafna tal-prestiġjuż 2020 Premju A' Design Award tad-Deheb fil-Kategorija tal-Kompetizzjoni ta' Disinn tal-Għamara.

DehebGħamara· 2020

Planck Tabella Tal-Kafè

minn Kristof De Bock

Klijent: Dasein Products

Rebbieħ tal-Premju A' Design Award tad-Deheb fil-Kategorija ta' Għamara

62,500

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #93711

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Planck Tabella Tal-Kafè

It-tabella hija magħmula minn biċċiet differenti ta 'plajwud li huma inkollati flimkien taħt pressjoni. L-uċuħ huma sandpapered u miksi bil-verniċ mat u qawwi ħafna. Hemm 2 livelli - minn meta l-parti ta 'ġewwa tat-tabella hija vojta - li hija prattika ħafna biex tqiegħed rivisti jew plaids. Taħt il-mejda hemm roti tal-balal. Allura d-differenza bejn l-art u t-tabella hija żgħira ħafna, iżda fl-istess ħin, huwa faċli li tiċċaqlaq. Il-mod kif jintuża l-plajwud (vertikali) jagħmilha b'saħħitha ħafna.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tad-Deheb

Planck Tabella Tal-Kafè huwa rebbieħ tal-Premju A' Design Award tad-Deheb, rikonoxximent prestiġjuż ħafna mogħti lil disinji tal-ewwel klassi, mill-isbaħ u eċċellenti. Ir-rebbieħa tad-Deheb huma ħolqien innovattiv ħafna, b'viżjoni u li jleqqu b'mod li jgħammex, li jirriflettu t-talent, l-għerf u l-ħila tad-disinjaturi tagħhom. Huwa mistenni li Planck Tabella Tal-Kafè ikun invenzjoni mfaħħra ħafna, li tistabbilixxi x-xejriet u monumentali li tagħti valur bla preċedent. Dan id-disinn rebbieħ tad-Deheb huwa proġett spettakolari u rispettat li jwessa' l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. Planck Tabella Tal-Kafè joħloq xewqa qawwija, iqajjem il-passjoni, iħeġġeġ il-kreattività u jisħer lilna.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: Dasein products was looking to come up with an unique coffee table. Different in form and materials. They choose plywood but used it in an unconventional way by bonding it together on the flat sides. This gave the possibility to make a robust and elegant looking object at the same time. Seen from the sides one sets eyes on a block of wood, seen from the fronts, one looks at an elegant, 2-level object. Due to the strength of the material, the thickness of the levels can be reduced to a thin line.
Dimensjonijiet u Ippakkjar: Width 75 cm x Depth 46 cm x Height 30 cm
Tikketti: Objectdesign, coffeetable, furniture, living room
Teknoloġija tal-Produzzjoni: The table is made of several pieces of polish pine plywood that are prepared with a CNC cutter. Once they are connected with glue and kept under high pressure for at least 12 hours, they require intense sandpapering and varnishing.

At the bottom, holes are drilled for the bullet wheels that need to be glued in.
Sfida tad-Disinn: The biggest challenge for this project was to come up with a unique concept that has an esthetic added value but is still functional. Dasein Products has chosen to make a rather small coffee table that is very easy movable. It can be used to store plaids, books, etc. so it looks neat at the sam time.
Riċerka: The object is designed with the golden ratio in mind. Seen both from top as from short sides, these proportions are respected for the wooden part.

The 2 horizontal layers where intended to be thin but strong. They are narrowed down to 17mm and still a full grown man can stand on the middle of the table.

A lot of time was spend on finding the bullet wheels. Metal wheels are strongest, but make a lot of noise on a stone floor. So the designer came up with small nylon wheels, but lots of them. In total 16 are placed under each table.
Ispirazzjoni: Above all, furniture should be functional. The challenge was to create a coffee table that was different then others, esthetic and functional. With these goals in mind, the designer explored different materials.
Tul tal-Proġett: The basic idea came early summer of 2019. It took some time to get the details straight in the workshop in Ronse (Belgium) but in the beginning of September the coffee table was presented to the world.
Fluss tal-Operazzjoni: The table is fairly small and movable. The idea is to eliminate the big center piece table, but place (more than one) in the living room that can be moved to where it is needed.
Membri tat-Tim: Kristof De Bock
Krediti tal-Immaġni: Photograper Pieter Gregoire