Vista EY2T Kamera Motorizzata għall-Identifikazzjoni Bijometrika minn Chris Dopp & Travis Baldwin

Id-disinn Vista EY2T Kamera Motorizzata għall-Identifikazzjoni Bijometrika minn Chris Dopp & Travis Baldwin huwa rebbieħ stmat ħafna tal-prestiġjuż 2015 Premju A' Design Award tal-Fidda fil-Kategorija tal-Kompetizzjoni ta' Disinn ta' Prodotti tas-Sigurtà u Sorveljanza.

FiddaProdotti tas-Sigurtà· 2015

Vista EY2T Kamera Motorizzata għall-Identifikazzjoni Bijometrika

minn Chris Dopp & Travis Baldwin

Klijent: Vista Imaging and Crea Inc Design LTD

Rebbieħ tal-Premju A' Design Award tal-Fidda fil-Kategorija ta' Prodotti tas-Sigurtà

25,961

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #40052

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Vista EY2T Kamera Motorizzata għall-Identifikazzjoni Bijometrika

Il-Vista EY2T hija kamera motorizzata għall-identifikazzjoni bijometrika bl-użu tal-iris u r-rikonoxximent tal-wiċċ. L-apparat jiskennja l-qasam viżiv għal wċuħ, imbagħad il-muturi jdawru l-kamera biex timmira lejn l-għajnejn. Firxa wiesgħa ta' LEDs infrared flimkien ma' sistema ta' awtofokus jippermettu l-qbid tal-immaġni f'distanza ta' bejn 3 u 6 piedi, u b'hekk ma hemmx bżonn ta' mmirar manwali. Disa' sensuri ta' quddiem huma magħquda flimkien wara wiċċ iswed uniku, u l-forma ċilindrika ta' pillola b'truf tondi toħloq forma kalma u mhux ta' theddida. Il-kamera tista' tintuża waħedha jew flimkien ma' immuntar tal-ħajt.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Fidda

Vista EY2T Kamera Motorizzata għall-Identifikazzjoni Bijometrika huwa rebbieħ tal-Premju A' Design Award tal-Fidda, rikonoxximent prestiġjuż straordinarjament mogħti lil disinji tal-ogħla livell, sbieħ u impressjonanti. Ir-rebbieħa tal-Fidda huma xogħlijiet brillanti ħafna u kreattivi ħafna li juru l-għarfien espert, it-talent u l-aċċuratezza tad-disinjaturi tagħhom. Huwa mistenni li Vista EY2T Kamera Motorizzata għall-Identifikazzjoni Bijometrika ikun xogħol mill-isbaħ, eżemplari, professjonali ħafna u innovattiv bil-fond. Dan id-disinn rebbieħ tal-Fidda huwa invenzjoni notevoli u mammirata li tikkontribwixxi biex jitwessgħu l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. Vista EY2T Kamera Motorizzata għall-Identifikazzjoni Bijometrika huwa ħolqien li ħafna jinvidjawh, li jqajjem ix-xewqat, iġib sentimenti pożittivi u joħloq tgħaġġib u mistagħġib.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Dimensjonijiet u Ippakkjar: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Tikketti: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Teknoloġija tal-Produzzjoni: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Sfida tad-Disinn: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Riċerka: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Ispirazzjoni: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Tul tal-Proġett: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Fluss tal-Operazzjoni: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Membri tat-Tim: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Krediti tal-Immaġni: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015