Horizontal Long Mesh Għamara għan-Nar minn Shigeru Yamada

Id-disinn Horizontal Long Mesh Għamara għan-Nar minn Shigeru Yamada huwa rebbieħ stmat ħafna tal-prestiġjuż 2024 Premju A' Design Award tal-Fidda fil-Kategorija tal-Kompetizzjoni ta' Disinn ta' Tagħmir tal-Kampeġġ u Tagħmir ta' Barra.

FiddaTagħmir tal-Kampeġġ· 2024

Horizontal Long Mesh Għamara għan-Nar

minn Shigeru Yamada

Klijent: Norinori Life

Rebbieħ tal-Premju A' Design Award tal-Fidda fil-Kategorija ta' Tagħmir tal-Kampeġġ

164,851

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #153103

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Horizontal Long Mesh Għamara għan-Nar

Filwaqt li n-njieran miftuħa jistgħu jagħmlu ħsara lill-ħaxix u l-ħamrija, dan il-prodott ħafif u kompatt b'qafas tal-azzar li ma jissaddadx u qafas konkav tax-xibka jippermittilek tgawdi njieran f'diversi ambjenti mingħajr ma xxerred ir-rmied jew ix-xraren tan-nar fl-ambjent. L-istruttura ppatendata fil-Ġappun tippermetti li l-fjammi jgħaddu mix-xibka billejl, u b'hekk tħalli tiħares il-injam kif bil-mod bil-mod jitbandal f'rmied.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Fidda

Horizontal Long Mesh Għamara għan-Nar huwa rebbieħ tal-Premju A' Design Award tal-Fidda, rikonoxximent prestiġjuż straordinarjament mogħti lil disinji tal-ogħla livell, sbieħ u impressjonanti. Ir-rebbieħa tal-Fidda huma xogħlijiet brillanti ħafna u kreattivi ħafna li juru l-għarfien espert, it-talent u l-aċċuratezza tad-disinjaturi tagħhom. Huwa mistenni li Horizontal Long Mesh Għamara għan-Nar ikun xogħol mill-isbaħ, eżemplari, professjonali ħafna u innovattiv bil-fond. Dan id-disinn rebbieħ tal-Fidda huwa invenzjoni notevoli u mammirata li tikkontribwixxi biex jitwessgħu l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. Horizontal Long Mesh Għamara għan-Nar huwa ħolqien li ħafna jinvidjawh, li jqajjem ix-xewqat, iġib sentimenti pożittivi u joħloq tgħaġġib u mistagħġib.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: Most ordinary mesh-type fire pits have the mesh supported from below, but this product has a concave mesh structure that hooks onto the side frames, a structure that did not exist before and for which a patent was obtained (patent 7249692). This unique structure eliminates the weak point of conventional mesh-type fire pits, which are vulnerable to wind and difficult to cook with, while at the same time realizing the unique value of the beautiful flames shining through the mesh.
Dimensjonijiet u Ippakkjar: Size:
W53cm×D18cm×H32cm(when assembled)
W50cm×D25cm×H5cm(when stored)
Material:
Main body, sidebars, legs: Stainless steel (SUS304)
Mesh sheet: Stainless steel (SUS304) ＊Dovetails are made of aluminum
Storage bag: cotton
Logo sticker: High-gloss paper (water-resistant)
Weight:1.8kg
Tikketti: Outdoor, Camping, Bonfire
Teknoloġija tal-Produzzjoni: Conventional mesh-type fire pits were used with the mesh spread out, but while they were lightweight and compact, they were vulnerable to wind and unsuitable for cooking. The mesh is then hooked onto a frame made of stainless steel (which can be assembled and put away in less than 30 seconds), creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash. The ironworker, who is a camper himself, developed this product under the direction of an outside designer to achieve both functionality and aesthetics.
Sfida tad-Disinn: The main focus of this product was to hold the woven stainless steel mesh in a U-shape with a frame, but it was also a portable product, so it needed to be compact and lightweight. Therefore, it was necessary to consider a variety of structures that could be easily assembled with a minimum of parts.
Riċerka: With the outdoor boom that began in the late 2010s, camping for a small group of one or two people has become especially popular, and a variety of outdoor gears have been sold. Among them, fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with. The new design has a stainless steel frame (which can be assembled and put away in less than 30 seconds) and a structure that hooks onto the mesh, creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash.
Ispirazzjoni: Fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with.
Tul tal-Proġett: This product was launched in Japan on September 1, 2021
Fluss tal-Operazzjoni: This fire pit was created by an ironworker who is also a camper. The stainless-steel mesh with high combustion efficiency is shaped in a concave that is less susceptible to wind. By using a trivet, a heavy Dutch oven can also be used. It is designed to allow the flames to be seen for its beauty and ease of cooking over an open fire where you can always see the heat level. Tough, minimal, and logical structure with an exquisite finishing. It is true craftsmanship quality that you will appreciate every time you use it.
Privattivi: This product is patent pending (Patent Application 2023-011315, filed 1/27/2023) by Noridomi Ironworks Co.,LTD.
Membri tat-Tim: Creator:Shigeru Yamada
Creative Derector:Takashi Sekimitsu
Assistant Director:Kenzo Noridomi
Krediti tal-Immaġni: Image #1: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #2: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #3: Director Kenzo Noridomi, Horizontal Long Mesh, 2023.
Image #4: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #5: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.