Oak Konan Shinagawa Bini tal-Uffiċċji minn Obayashi Corporation

Id-disinn Oak Konan Shinagawa Bini tal-Uffiċċji minn Obayashi Corporation huwa rebbieħ stmat ħafna tal-prestiġjuż 2023 Premju A' Design Award tal-Fidda fil-Kategorija tal-Kompetizzjoni ta' Disinn tal-Arkitettura, Bini u Strutturi.

FiddaArkitettura· 2023

Oak Konan Shinagawa Bini tal-Uffiċċji

minn Obayashi Corporation

Klijent: Obayashi-Shinseiwa Real Estate Corporation

Rebbieħ tal-Premju A' Design Award tal-Fidda fil-Kategorija ta' Arkitettura

18,291

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #149620

Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Oak Konan Shinagawa Bini tal-Uffiċċji

Oak Konan Shinagawa huwa bini tal-uffiċċji ta' 12-il sular li jinsab qrib il-port f'Tokjo, il-Ġappun. Il-qafas estern abjad qisu kannizzata huwa qoxra esterna magħmula minn konkrit prefabbrikat li sservi kemm bħala qafas strutturali kif ukoll bħala tagħmir għad-dell mix-xemx. Flimkien mal-kostruzzjoni tal-azzar tal-qalba, din l-istruttura ibrida toħloq spazju tal-uffiċċji mingħajr kolonni li jippermetti layouts flessibbli. Il-kolonni u t-travi prefabbrikati jiġu prodotti barra mis-sit u jitniżżlu f'posthom minn fuq, ħaġa li tissimplifika x-xogħol fuq is-sit. It-twieqi esterni jinkludu unitajiet ta' ventilazzjoni naturali li jinfetħu b'manku li jista' jitneħħa.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Fidda

Oak Konan Shinagawa Bini tal-Uffiċċji huwa rebbieħ tal-Premju A' Design Award tal-Fidda, rikonoxximent prestiġjuż straordinarjament mogħti lil disinji tal-ogħla livell, sbieħ u impressjonanti. Ir-rebbieħa tal-Fidda huma xogħlijiet brillanti ħafna u kreattivi ħafna li juru l-għarfien espert, it-talent u l-aċċuratezza tad-disinjaturi tagħhom. Huwa mistenni li Oak Konan Shinagawa Bini tal-Uffiċċji ikun xogħol mill-isbaħ, eżemplari, professjonali ħafna u innovattiv bil-fond. Dan id-disinn rebbieħ tal-Fidda huwa invenzjoni notevoli u mammirata li tikkontribwixxi biex jitwessgħu l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. Oak Konan Shinagawa Bini tal-Uffiċċji huwa ħolqien li ħafna jinvidjawh, li jqajjem ix-xewqat, iġib sentimenti pożittivi u joħloq tgħaġġib u mistagħġib.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: The building is a mid-rise, 12-story office building located near the harbor in Shinagawa, Tokyo.
The distinctive, white lattice-like exterior frame is an outer shell made of precast concrete serving as
structural frame as well as sun-shading device. Combined with the steel construction of the core this
hybrid structure creates a column-free office space. The fusion of structure and finishing enhances high
buildability and sustainability.
Dimensjonijiet u Ippakkjar: [Site area] 2,635.57m2
[Building area] 1,485.79m2
[Total floor area] 16,331.64m2
[Number of floors] 12 floors above ground, 1 floor below ground, tower building 1st floor
[Maximum Height] 56.76m
[Structure] steel construction, reinforced concrete construction in some parts
Tikketti: Structural Frame, Facade Design, High Added-Value, High Buildability, Equipment units, Office Interior, Tokyo
Teknoloġija tal-Produzzjoni: Supply and exhaust air for the office is provided on the east, west, north sides from equipment units (air supply
units and exhaust air units) built into the aluminum curtain wall inside the columns and beams.
By taking advantage of the depth (500mm) of the exterior shell structure and installing air intake and exhaust air
outlets on the same exterior wall surface, the amount of ductwork in the office ceiling was significantly reduced,
which also contributes to high buildability.
The deep structural frame also controls the amount of direct solar radiation and significantly reduces the heat loads.
Sfida tad-Disinn: Labor shortage in the Japanese Construction Industry is a major challenge.
Although research into new technologies such as construction robots is progressing, there are still few examples of their use in actual construction sites.
One of the major themes of this project is high buildability.
We communicated with the construction staff to find a construction method that was easy to construct and of high quality.
At the same time, as architects, we had to keep creating new ideas for exterior and interior to added-value to the client.
Riċerka: Labor shortage have recently become major challenges in the Japanese Construction Industry.
This building uses precast concrete columns and beams, which serve as both the structure and exterior finishing materials of the shell structure that characterizes the facade.The use of precast concrete elements fabricated off-site ensures high quality and accuracy.
In addition, the structural frame was designed without horizontal connection, which enables to simplify the site erection. Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
Ispirazzjoni: Labor shortage have recently become major challenges in the Japanese Construction Industry.
Structural frame was designed without horizontal connection, which enables to simplify the site erection.
Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
The design of the interior in many areas is based on a motif of vertical and
horizontal lines and grids inspired by the facade design.
Tul tal-Proġett: The project started in September 2020 and finished in July 2022 in Tokyo, Japan.
Fluss tal-Operazzjoni: The column-free office space with a hybrid structure of a precast concrete outer frame and steel construction improves the flexibility of office layout and significantly enhances the convenience of users.
In addition, the exterior windows have natural ventilation window units that can be opened and closed freely by attaching a detachable handle, allowing for direct air intake.
Membri tat-Tim: Hiroshi Satake
Kenji Matsuoka
Rei Sato
Kazuhiro Yasufuku
Krediti tal-Immaġni: Image #1: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #2: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #3: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #4: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #5: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022