Guangming Public Service Bini tal-Uffiċċji tal-Gvern minn Zhubo Design Co., Ltd.

Id-disinn Guangming Public Service Bini tal-Uffiċċji tal-Gvern minn Zhubo Design Co., Ltd. huwa rebbieħ stmat ħafna tal-prestiġjuż 2021 Premju A' Design Award tal-Platinu fil-Kategorija tal-Kompetizzjoni ta' Disinn tal-Arkitettura, Bini u Strutturi.

PlatinuArkitettura· 2021

Guangming Public Service Bini tal-Uffiċċji tal-Gvern

minn Zhubo Design Co., Ltd.

Klijent: Zhubo Design

Rebbieħ tal-Premju A' Design Award tal-Platinu fil-Kategorija ta' Arkitettura

230,303

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #110344

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Guangming Public Service Bini tal-Uffiċċji tal-Gvern

Guangming Public Service huwa bini ta' uffiċċji tal-gvern u ta' servizz pubbliku f'Shenzhen, iċ-Ċina. Il-bini huwa maqsum f'żewġ blokok b'forom distinti. Il-volum rettangolari ta' fuq fih l-uffiċċji, filwaqt li l-blokka t'isfel tospita sala ta' servizz pubbliku b'saqaf immewweġ iffurmat bħal katina ta' muntanji. Żewġ għoljiet żgħar fis-sit huma ppreservati, ħaġa li tnaqqas it-tħaffir u testendi l-pajsaġġ aħdar tal-madwar. Il-pjanta tevita t-tqassim magħluq li huwa komuni fil-binjiet governattivi Ċiniżi. Id-disinn isegwi mudell ta' żvilupp ekoloġiku b'impatt baxx.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Platinu

Guangming Public Service Bini tal-Uffiċċji tal-Gvern huwa rebbieħ tal-Premju A' Design Award tal-Platinu, rikonoxximent prestiġjuż ħafna mogħti lil disinji tassew eċċezzjonali, eleganti u manjifiċi. Ir-rebbieħa tal-Platinu huma mirakli tal-ħolqien, xhieda tal-limiti tal-kreattività intellettwali, u juru l-professjonalità u l-ġenju bla paragun tad-disinjaturi tagħhom. Huwa mistenni li dawn id-disinji jkunu l-aktar xogħlijiet magħrufa li jiddefinixxu l-estetika ta' epoka, jikkontribwixxu għall-benessri tas-soċjetà u jwessgħu l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. Guangming Public Service Bini tal-Uffiċċji tal-Gvern juri livell ta' eċċellenza trasċendenti u jagħmel id-dinja post aħjar bil-karatteristiċi siewja tiegħu. Guangming Public Service Bini tal-Uffiċċji tal-Gvern huwa xogħol li rebaħ il-Premju A' Design Award tal-Platinu li jqajjem ix-xewqat, jispira, ifarraħ u joħloq ferħ kbir.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: The designer didn't just say no to "Taishi Chair" form but took a more indirect, flexibleway. There are 2 small hills about 30m high and the plot was full of piles of earth dumped from surrounding construction sites, leaving little space for dumped earth for the project. Based on the site conditions, the designer proposed to preserve the 2 hills, whichcanreduce the excavation work while also helping form a group of green hills that extend to the Niu Mountain on the north side of the plot.
Dimensjonijiet u Ippakkjar: Total land area: 29,013.71 sqm
Gross floor area: 81,198.86 sqm
Floor area ratio: 2.17
Height: 53.3 m
Floors: 11 (10 above the ground and 1 underground)
Tikketti: Public service platform, government building, Zhubo Design,mix use building, office spaces
Teknoloġija tal-Produzzjoni: The project has following structural features:
1. The structure system uses the shear wall structure that is transformed from the combination of diagonal strut andtruss. The span reaches 42.5 m.
2. There are overhangs floor by floor above the transitional floor. The longest one is 12.6 m, supported by inclined columns.
3. The first floor above the ground has an undulating surface while at the middle of standard floors are some openings at the facade.
Sfida tad-Disinn: There were three challenges confronted by the design team:
1. The span of openings at the middle part is so large that the construction is difficult.
2. The arrangement of steel beams conforms to the changes of undulating of curved roof. Thus, the drawings and construction must be accurate.
3. The curtain wall of facade adopts triangle perforated panel with an optimized size. Realizing a continuous curved surface made from triangle panels needs high-level abilities of construction and geometry optimization experience in design stage.
Riċerka: The solution not only solved practical problems but also responded to the low-impact development mode advocated by the District. Fortunately, the authority eventually agreed to preserve the southern hill, so that a "Taishi chair" layout featuring enclosures on three sides would be impossible for this project.
Ispirazzjoni: Taishi Chair-like layout (three sides enclosed, south side open) is very common among Chinese government buildings, and was also requested in the project's design brief. Even so, the designer intended to break the conservative Taishi Chair-like spatial pattern, with a view to bringing a new image and injecting vitality into the government architecture.
Tul tal-Proġett: 2013-2019
Shenzhen City, China
Fluss tal-Operazzjoni: Considering that the planning of Guangming Districtemphasizes a green city development mode with low impact, the designer suggested that the buildingset an example to implement the concept.
The design team divided the building into 2blocks with distinct forms at vertical level. The upper rectangular volume is office, while the lower block functions as a public service hall, whose rooftop is shaped like anundulating "mountain range".The flexible curved plane of the "mountain"creates a relaxing atmosphere.
Membri tat-Tim: Project directors: Feng Guochuan, Zhong Qiao, Liu Xiaoying
Executive managers: Qu Yu, Zhang Biqin, Xiong Guilin
Designers: Xu Longjie, Gong Xiaowen, Deng Hua, Zhang Meisong, Hou Lianjian, Bao Shaobin, Qu Zhenhua, Liang Fuji, Xie Bo, Lv Fang
Krediti tal-Immaġni: Xia Zhi